Is your 2010 GMC Yukon or other GM vehicle suffering from strange and frustrating electrical problems? The Body Control Module, or BCM, is the central command center for your vehicle’s body electronics. When it fails, it can cause a wide range of issues, from flickering lights to complete system shutdowns. This replacement Body Control Module is the definitive solution, arriving at your door pre-programmed with the latest GM software updates, specifically matched to your vehicle’s VIN.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional interior and exterior lights (headlights, dome lights, dash lights).
- ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
- ✔ The security system or keyless entry malfunctioning, or the alarm sounding randomly.
- ✔ False warning lights appearing on the instrument cluster, such as ‘Service StabiliTrak’ or ‘Service Traction Control’.
- ✔ The radio or infotainment system behaving unpredictably.
- ✔ A ‘no-start’ condition where the engine cranks but won’t start due to security system conflicts.
- ✔ Rapid battery drain while the vehicle is parked.
From the Diagnostic Bay
We had a 2010 Yukon in the shop that was driving its owner crazy. The horn would honk randomly, the radio would switch stations on its own, and sometimes the power locks wouldn’t work. The owner had already replaced the battery and checked all the fuses. After connecting our diagnostic tool, we found multiple communication error codes all pointing to one culprit. We installed a VIN-programmed BCM, and it was like giving the truck a new brain. All the bizarre electrical gremlins vanished instantly. This highlights how a single failing module can create a cascade of seemingly unrelated problems.
A Direct, Programmed Solution: The 2010 Yukon Body Control Module
Don’t waste time and money at the dealership with diagnostic fees and programming charges. We simplify the repair process. Simply provide your vehicle’s VIN during checkout, and our technicians will flash this module with the correct software for your specific vehicle configuration. This makes the installation process significantly easier, getting you back on the road faster.
Important Post-Installation Information
While this module is programmed for your vehicle, some systems may require a ‘handshake’ procedure after installation. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light and traction control operation.
Guaranteed Fitment
This BCM is a direct replacement for a wide array of GM vehicles and part numbers. Please verify your original part number against the list below to ensure compatibility.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
Do I need to have this BCM programmed by a dealer?
No. We handle the programming for you before we ship the part. Just provide your vehicle’s 17-digit VIN at checkout, and it will arrive ready for installation.
Where is the BCM located on my 2010 GMC Yukon?
On the 2010 Yukon, the Body Control Module is typically located under the steering column, behind the lower dash panel. Always consult a service manual for the exact location and replacement procedure for your specific vehicle.
Is this a new or used part?
This is a high-quality, tested OEM replacement part that has been inspected and prepared for service, complete with the latest software for your vehicle.
What happens if my airbag light turns on after I install it?
This is a known possibility. The new BCM needs to be electronically introduced to the airbag system. A qualified technician with a professional diagnostic tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve the light.
Is there a core charge for my old part?
No, there is no core charge. You can keep your original module without needing to send it back.