Restore Full Functionality to Your GM Vehicle
Are you battling frustrating electrical gremlins in your 2010 Cadillac Escalade? Flickering lights, power windows with a mind of their own, or random warning messages on your dash are classic signs of a failing Body Control Module (BCM). As the central nervous system for your vehicle’s comfort and convenience features, a faulty BCM can make driving a nightmare. This isn’t just an annoyance; it can affect security systems and vehicle operation. Take back control with a reliable, pre-programmed solution.
We offer a genuine GM Body Control Module, part number 25892622, that arrives at your door ready for installation. The biggest hurdle in BCM replacement has always been the expensive and time-consuming trip to the dealership for programming. We eliminate that step. Simply provide us with your vehicle’s VIN during checkout, and our experts will flash the module with the latest, most stable GM software specific to your Escalade. This ensures seamless communication with your vehicle’s other electronic systems right out of the box.
Case Study: A Tricky Diagnosis
A customer brought in a 2010 Yukon Denali (a close sibling to the Escalade) with a perplexing issue. The interior lights would stay on, the radio wouldn’t turn off with the key, and the remote start was inoperative. They had already replaced the battery and checked all the fuses. After connecting my scan tool, I found a series of U-codes, specifically U0140 – Lost Communication With Body Control Module. In my shop, I’ve seen this exact scenario on dozens of these GMT900 platform trucks. The internal logic of the original BCM had failed. We installed one of our VIN-programmed modules, and within 30 minutes, all symptoms were gone. The customer saved hundreds compared to the dealership quote.
Is Your GM Vehicle Showing These BCM Failure Signs?
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or failing to turn on.
- ✔ The security system acting up, causing false alarms or no-start conditions.
- ✔ Inaccurate gauge readings or warning lights that have no apparent cause.
- ✔ Remote keyless entry (RKE) or remote start not functioning.
- ✔ Diagnostic Trouble Codes (DTCs) such as U0140, B1001, or other communication errors.
A Straightforward Guide to Your BCM Installation
For a 2010 Escalade, the BCM is located under the driver’s side of the dashboard, near the steering column. While professional installation is always an option, many DIY enthusiasts can perform this replacement.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes before beginning.
- Access the Module: You may need to remove the lower dash panel or knee bolster to gain clear access to the BCM. It’s typically held in place by a few bolts or plastic clips.
- Disconnect and Remove: Carefully unplug the electrical connectors. These connectors have locking tabs that must be depressed to be released. Never pull on the wires themselves. Once disconnected, remove the old BCM.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and reconnect all electrical connectors. Ensure they click securely into place.
- Reconnect and Test: Reinstall any panels you removed, then reconnect the negative battery terminal. Start the vehicle and test all body functions – windows, locks, lights, radio, etc.
Important Post-Installation Notes
While our programming handles the majority of the setup, some GM vehicles require additional steps after installation. A professional scan tool may be required for these procedures:
- Airbag System Sync: If your airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the systems.
- Brake Pedal Position Relearn: In some cases, a brake pedal position sensor relearn is necessary for proper brake light and traction control operation.
Disclaimer: Always consult a factory service manual or a qualified technician for procedures specific to your vehicle.
Verified Vehicle Compatibility
This module is a direct replacement for a wide range of General Motors vehicles. It is compatible with part numbers 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084. Please verify the part number on your original module or check the detailed fitment list below.
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
EXPRESS 3500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
IMPALA 06-12 Body Control (BCM); (LH dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
ACADIA 07-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
TAHOE 10 Body Control (BCM); (under steering column), ID 25892622
TRAVERSE 09-12 Body Control (BCM); (LH dash)
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 2500 VAN 11-12 Body Control (BCM); (center dash)
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 22860591
DTS 06-11 Body Control (BCM); (RH center dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 11-12 Body Control (BCM)
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
STS 10 Body Control (BCM); center dash
SAVANA 3500 VAN 08-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898
CTS 08-13 Body Control (BCM); LH dash
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921436
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
G8 08-09 Body Control (BCM); (center dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898
ESCALADE 10 Body Control (BCM); (under steering column), ID 25892622
LUCERNE 06-11 Body Control (BCM); (right side dash)
CTS 08 Body Control (BCM); RH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898
SRX 07-09 Body Control (BCM); LH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898
EXPRESS 3500 VAN 11-12 Body Control (BCM)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
SAVANA 3500 VAN 11-12 Body Control (BCM)
VUE 08-10 Body Control (BCM); (center dash)
CAPRICE 11-13 Body Control (BCM)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EXPRESS 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
Frequently Asked Questions
How do I provide my VIN for programming?
After you complete your purchase, you will receive instructions to reply to your order confirmation email with your vehicle’s 17-digit VIN. We cannot ship your module until we receive this information.
Is this part really plug-and-play?
For most vehicles, yes. Our VIN programming ensures the BCM works with your vehicle’s specific options. However, as noted above, some models may require a simple relearn procedure for the airbag or brake pedal position sensor, which requires a capable scan tool.
Why is a programmed BCM better than a used one from a junkyard?
A used BCM is programmed to the donor vehicle’s VIN and options. Installing it in your car will cause function mismatches and likely won’t work correctly. Our service provides a module with fresh software that is specifically matched to your exact vehicle.
Do I need to return my old BCM?
No. This purchase requires no core charge or return. You can keep your original module.
What if my airbag light is on after installation?
This is a known possibility on some GM models. It means the new BCM needs to be electronically ‘introduced’ to the airbag system’s computer (SDM). A qualified shop can perform the ‘Setup SDM Primary Key in BCM’ procedure in a few minutes to resolve this.
Will this fix my specific problem?
This module will correct issues directly caused by a faulty BCM. If you’re experiencing the symptoms listed above, there is a very high probability this is the solution. For a definitive diagnosis, we always recommend consulting a professional mechanic or running a full diagnostic scan.