2010 Escalade Body Control Module 25847589 | Programmed to Your VIN

Restore Your Escalade’s Electronics!

Experiencing strange electrical issues in your 2010 Escalade? This Body Control Module arrives programmed to your VIN, ready for installation. Fix faulty lights, power accessories, and security system problems without a trip to the dealer. Order today and restore full function!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1061 Categories: ,
Guaranteed Safe Checkout

Is Your 2010 Escalade Acting Possessed?

If you’re dealing with a frustrating storm of electrical gremlins in your 2010 Cadillac Escaladeโ€”like power windows with a mind of their own, flickering interior lights, a security system that won’t cooperate, or even a vehicle that refuses to startโ€”the culprit is very likely a failing Body Control Module (BCM). As the central command for your vehicle’s comfort and convenience features, when the BCM goes down, it can make your luxury SUV feel completely unreliable.

From the Shop Floor: A Real-World Diagnosis

“Just last month, a 2010 Escalade was towed to my shop with a bizarre combination of symptoms: the radio wouldn’t turn off even with the key out, the power locks were unresponsive, and the dash was lit up with random warning lights. The owner had already replaced the battery, thinking it was a simple power issue. After a quick scan, we found multiple communication loss codes pointing directly to the BCM. These modules, especially on the GMT900 platform, are prone to internal circuit failure over time. It’s a repair I’ve performed hundreds of times, and the symptoms are almost always the same.”

The Simple, Dealer-Free Solution: A VIN-Programmed BCM

Forget the hassle and expense of a dealership visit. This Body Control Module is the direct, effective solution to restore your Escalade’s functionality. We take the guesswork out of the repair by pre-programming the module specifically for your vehicle using your VIN. This means it arrives at your door with the latest GM software updates already installed, ready for a straightforward installation.

Common Symptoms of a Failing 2010 Escalade Body Control Module:

  • โœ” Erratic or non-functional power windows, door locks, and mirrors.
  • โœ” Interior or exterior lights staying on or not turning on at all.
  • โœ” Malfunctioning remote keyless entry (RKE) system.
  • โœ” Intermittent no-start condition or security system warning light.
  • โœ” False warnings on the driver information center (DIC).
  • โœ” Communication errors with other vehicle modules (U-codes).

Easy Installation Guide

Replacing the BCM on your 2010 Escalade is a manageable job for a DIYer. The module is typically located under the driver’s side of the dashboard, near the steering column.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
  2. Access the Module: Remove the lower dash panel beneath the steering column to gain access to the BCM.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old module from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors.
  5. Reconnect Power: Re-attach the negative battery terminal.

Critical Post-Installation Procedures

After installing your new BCM, a few final steps are required to ensure all systems operate correctly. This is not a defect but a standard security and safety procedure for GM vehicles.

  • Airbag System Reset: To clear the airbag warning light, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible high-level diagnostic tool. This re-establishes the security handshake between the new BCM and the airbag system’s Sensing and Diagnostic Module (SDM).
  • Brake Pedal Position Sensor Relearn: Some vehicles will require a brake pedal position sensor relearn. This recalibrates the sensor to the new module, ensuring accurate brake light operation and stability control function.

Note: While these procedures can be done by a skilled DIYer with the right equipment, we recommend consulting a professional technician if you are unfamiliar with these processes.

Guaranteed Fitment & Compatibility

This module is a direct replacement for a wide range of GM vehicles. Please verify your original part number against the list below to ensure compatibility. This unit replaces the following part numbers:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

After purchase, please reply to your order confirmation email with your vehicle’s 17-digit VIN so we can program the module before shipment.

Genuine OEM

Yes

Condition

Refurbished

MPN

25847589

Interchange part number

PartNumber

591

Model

ESCALADE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top