Are you tired of dealing with the bizarre electrical issues plaguing your vehicle? One minute the power locks work, the next they don’t. The dashboard lights up with random warnings, or worse, the security system prevents you from starting the engine. These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM), the electronic nerve center of your car’s comfort and security features. This isn’t a problem you have to live with. We offer a reliable, straightforward solution with our pre-programmed 2010 Escalade Body Control Module, designed to get your vehicle back to 100% functionality without a costly trip to the dealership.
Our unique cloning service is what sets this BCM apart. Instead of shipping you a blank module that requires specialized tools and expensive subscriptions to program, we handle everything for you beforehand. Simply provide your vehicle’s VIN at checkout. We use this to ensure we have the correct base hardware and the latest GM software updates. Then, we transfer the critical data from your original BCM directly to the new one. This process copies key codes, security information, and vehicle-specific options, making the replacement unit a perfect digital twin of your old one. The result is a true plug-and-play part that restores function the moment it’s installed.
A Technician’s Notebook
I remember a 2010 Yukon Denali—which uses the same platform as the Escalade—that came into the bay with a laundry list of complaints. The owner said the radio would turn off randomly, the driver’s side window was dead, and the anti-theft light would flash, causing intermittent no-start conditions. A scan showed a slew of U-codes, specifically a U0140 for lost communication with the BCM. After verifying power and ground at the module, it was clear the BCM itself was failing internally. Instead of a new module and a full dealer re-program, we used a cloned BCM. The customer was back on the road the same day for a fraction of the cost, and all the strange electrical gremlins were gone for good. This is the power of a properly prepared module.
Is Your Vehicle Showing These Symptoms?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, a faulty BCM is the likely culprit:
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ The security system engaging randomly, causing no-start situations.
- ✔ Inaccurate gauge readings or a dashboard that flickers.
- ✔ Diagnostic Trouble Codes (DTCs) related to communication errors, such as U0140, U0155, or other U-codes.
- ✔ Horn or alarm sounding without reason.
A Straightforward Guide to Installation
Thanks to our cloning service, installing your new 2010 Escalade Body Control Module is a simple mechanical swap. No programming is required after you receive the part.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
- Locate the BCM: On the 2010 Escalade and similar GM SUVs/trucks, the BCM is typically located under the driver’s side of the dashboard, near the steering column.
- Remove the Old Module: Carefully unplug the electrical connectors. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New BCM: Mount the replacement module in the same location and securely reconnect all electrical harnesses. You should hear a click as they lock into place.
- Reconnect the Battery: Re-attach the negative battery terminal.
- Perform Relearns (If Needed): Start the vehicle. In some cases, you may need to perform the Post-Installation Procedures outlined below, such as an airbag system sync or brake pedal position relearn, if specific warning lights appear.
Post-Installation Procedures
While our cloning service handles the heavy lifting, some vehicle systems may require a quick handshake with the new BCM. Please be aware of the following potential steps:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure correct brake light operation and to satisfy the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Vehicle Compatibility
This BCM is a direct replacement for a wide range of General Motors vehicles. Please verify your part number or match your vehicle from the list below. This module is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.
Frequently Asked Questions
Frequently Asked Questions
2010 Escalade Body Control Module
Will this fix my specific problem?
This is a direct solution for failures within the BCM itself. If your vehicle exhibits common symptoms like erratic lights, power accessory failure, or security faults, and the issue has been diagnosed as a bad BCM, then this part will resolve those problems.