Restore Full Electrical Function to Your 2010 Cadillac Escalade
Is your 2010 Escalade suffering from strange and unpredictable electrical problems? Issues like flickering lights, malfunctioning power windows or locks, a faulty security system, or inaccurate instrument cluster readings often point to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can create a cascade of frustrating issues. This replacement BCM is the definitive solution to restore your vehicle’s factory performance and reliability.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior or exterior lights staying on, flickering, or not working at all.
- ✔ The security system engaging randomly or preventing the vehicle from starting.
- ✔ Inoperative remote keyless entry (key fob).
- ✔ Warning lights (like ABS or Airbag) illuminating on the dash for no reason.
- ✔ Problems with the radio, climate control, or other interior accessories.
- ✔ Parasitic battery drain that leaves you with a dead battery.
The Simple, Programmed Solution for Your 2010 Escalade BCM
Replacing a BCM used to mean a costly trip to the dealership for installation and programming. We’ve eliminated that hassle. When you order from us, you get a Body Control Module that is professionally programmed specifically for your vehicle using your VIN. We flash it with the latest, most stable software updates from GM, ensuring optimal performance and compatibility. This makes the installation process as close to plug-and-play as possible, saving you time and hundreds of dollars in dealer fees. Simply provide your VIN after purchase, and we’ll handle the complex programming before we ship the part to you.
From the Diagnostic Bay
We had a 2010 Escalade come into the shop with a laundry list of bizarre electrical gremlins. The customer reported that the dome lights would stay on intermittently, the driver’s side window would only work sometimes, and the key fob had stopped working entirely. Our initial checks of fuses and wiring showed nothing obvious. After hooking up a high-level scan tool, we saw multiple communication error codes between various modules, all pointing back to the BCM. Instead of a dozen separate problems, it was one failing central computer. We installed a VIN-programmed BCM, performed the necessary system syncs, and every single issue was resolved instantly. It’s a perfect example of how one module can cause widespread, confusing symptoms.
Installation and Post-Install Procedures
Physically installing the BCM is a straightforward process, typically located under the steering column. After installation, some vehicles may require additional electronic ‘relearning’ procedures to ensure all systems communicate correctly. These may include:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: In some cases, a brake pedal position sensor recalibration is needed to ensure correct brake light and traction control operation.
Please Note: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
No Core Charge Required
This purchase comes with no core charge. You are not required to send your old, faulty module back to us, saving you the hassle and cost of return shipping.
Guaranteed Compatibility
This BCM is a direct replacement for a wide range of GM vehicles and part numbers. It is compatible with the following part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
This module fits a wide variety of GM trucks, vans, and SUVs from roughly 2006-2013, including the Escalade, Tahoe, Yukon, Suburban, Silverado, Sierra, Express, Savana, Acadia, Enclave, Traverse, Impala, and more. Please verify your part number to ensure proper fitment.
Frequently Asked Questions
Do I need to do any programming myself?
No. We handle all the programming before the module is shipped to you. We use the VIN you provide to load the correct software and vehicle-specific settings, making it ready for installation right out of the box.
Where do I provide my vehicle’s VIN?
After you complete your purchase, you will receive instructions on how to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your order until we receive and validate your VIN.
Can I install this BCM myself?
Yes, many of our customers with moderate mechanical skills can install the BCM themselves. It is typically located under the driver’s side dashboard. However, please be aware that some vehicles may require post-installation procedures with a professional scan tool, as mentioned above.
Why is my airbag light on after installing the new BCM?
The airbag light is a common occurrence after a BCM replacement. The new BCM needs to be electronically introduced to the vehicle’s Supplemental Restraint System (SRS). This requires a ‘Setup SDM Primary Key in BCM’ procedure, which must be done with a compatible high-level diagnostic tool.
Is this a new or used part?
This is a quality, inspected, and tested component, guaranteed to restore your vehicle’s functionality. It is programmed with the latest software for peak performance.