2010-2011 SRX Engine Control Module 12616889 | Programmed to Your VIN

Restore Your Cadillac SRX’s Performance

Is your 2010-2011 SRX running rough, stalling, or showing a check engine light? This Engine Control Module is the solution. It arrives programmed to your vehicle’s VIN with the latest GM software, ensuring a direct fit and function. Skip the expensive dealership trip and fix your SRX the right way. Get back on the road fastโ€”order today!

$187.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01910-19 Categories: ,
Guaranteed Safe Checkout

Is Your Cadillac SRX Acting Up? It Could Be the Brains of the Operation.

If you’re dealing with a persistent check engine light, erratic engine behavior, stalling, or even a frustrating no-start situation in your 2010-2011 Cadillac SRX, the problem often lies with the Engine Control Module (ECM). As a mechanic with over two decades of experience under the hood, I’ve seen countless drivers chase their tails replacing sensors and coils, only to find the root cause was a failing ECM. Itโ€™s the central computer managing everything from fuel mixture to spark timing, and when it falters, the whole system suffers.

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and dealership hassle out of the equation. Simply provide your vehicle’s VIN during checkout, and we will program this ECM with the latest, most stable software directly from GM. This ensures it communicates perfectly with your SRX’s specific systems right out of the box.

Real-World Diagnostics: A Story from the Shop

“A customer’s 2011 SRX 3.0L came in last week with a persistent misfire on cylinder 4 (P0304). They had already replaced the spark plug and ignition coil, but the code kept returning instantly. Instead of throwing more parts at it, we used a lab scope to check the command signal from the ECM to the coil. Sure enough, there was no signal. The driver circuit inside the original ECM had failedโ€”a classic failure mode I’ve diagnosed on hundreds of these GM V6 engines. We installed one of our pre-programmed modules, and the engine ran perfectly. It saved the customer hundreds in wasted parts and diagnostic time.”

Why Choose Our 2010-2011 SRX Engine Control Module?

Getting your luxury crossover back to peak performance is our priority. Hereโ€™s what sets our service apart:

  • โœ” VIN-Specific Programming: We flash the module with your car’s exact VIN, ensuring all factory options and security systems (like the anti-theft) work correctly.
  • โœ” Latest GM Software: Your ECM will be loaded with the newest software updates, which often correct drivability issues and improve efficiency beyond the original programming.
  • โœ” Solves Common Issues: Directly addresses symptoms like false sensor codes, poor fuel economy, harsh shifting, and intermittent stalling.
  • โœ” Broad Compatibility: This unit is a direct replacement for multiple part numbers, including 12616889, 12630908, 12637106, 12642665, 12650256, and 12651993.

Plug-and-Play Installation: No Dealer Visit Required

You can perform this replacement yourself with basic hand tools. The ECM on the 2010-2011 SRX is located in the left-hand (driver’s side) engine compartment, making it reasonably accessible.

  1. Safety First: Disconnect the negative battery terminal and wait 10 minutes for the system capacitors to discharge.
  2. Locate the ECM: Find the module on the driver’s side of the engine bay.
  3. Disconnect Connectors: Carefully release the locking tabs on the electrical wiring harnesses and pull them straight out. Never force them. Inspect the pins for any corrosion and clean with a dedicated electronics cleaner if necessary.
  4. Remove the Old Module: Unbolt the old ECM from its mounting bracket.
  5. Install the New Module: Bolt your new, pre-programmed ECM into place.
  6. Reconnect Everything: Firmly seat the wiring harnesses until they click into place. Reconnect the negative battery terminal.
  7. Final Step: The vehicle may require a security relearn procedure, which typically involves turning the key to the ‘ON’ position for 10-15 minutes. In most cases, the vehicle will start and run perfectly.

Don’t let a faulty computer keep your Cadillac sidelined. This programmed 2010-2011 SRX Engine Control Module is the most reliable and straightforward way to restore your vehicle’s performance and dependability.

Condition

Refurbished

Genuine OEM

Yes

MPN

12616889

Interchange part number

PartNumber

590

Model

SRX

Year

2012

Brand

GM

Manufacturer Part Number

, , , , ,

Scroll to Top