{
“title”: “2010-2011 Camaro ECM Engine Control Module 12617230 Programmed”,
“long_description”: “
Is Your 3.6L V6 Running Rough? It Could Be The ECM.
n
The Engine Control Module (ECM) is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it begins to fail, it can cause a cascade of frustrating and often difficult-to-diagnose problems. If your 2010-2011 Chevrolet Camaro, Buick LaCrosse, Cadillac CTS, or other compatible GM vehicle is experiencing perplexing issues, a faulty ECM is a likely culprit. This replacement ECM, part number 12617230, is the definitive solution to restore your vehicle’s performance, reliability, and drivability.
nn
Diagnosing a Failing 2010-2011 Camaro ECM
n
A failing engine computer can manifest in numerous ways, often mimicking other sensor or component failures. This can lead to wasted time and money replacing parts that aren’t the root cause of the problem. Before you continue swapping sensors, review these common symptoms of a bad ECM. If your vehicle is exhibiting several of these signs, it’s time to consider the main computer.
nn
Common Symptoms of a Faulty ECM
n
- n
- ✔ Persistent Check Engine Light (CEL) with various or no specific codes.
- ✔ Engine stalling, stumbling, or hesitating intermittently.
- ✔ Complete no-start or hard-starting conditions, especially when warm.
- ✔ Noticeable decrease in fuel economy.
- ✔ Poor engine performance, lack of power, or rough idling.
- ✔ Communication errors with diagnostic scan tools.
- ✔ Erratic automatic transmission shifting behavior.
- ✔ Misfire codes that don’t resolve after replacing plugs, coils, or injectors.
n
n
n
n
n
n
n
n
nn
From the Diagnostic Bay
n
We had a 2011 Buick Enclave come into the shop with a complaint of random stalling and a check engine light that would come and go. The owner had already replaced the crankshaft position sensor and two ignition coils based on codes that were pulled. The problem persisted. When we connected our professional scan tool, we noticed intermittent communication drops with the engine module. We couldn’t even get a consistent data stream. After verifying the power and ground circuits to the ECM were solid, we knew the internal processor was failing. We installed one of these VIN-programmed modules, and the Enclave ran perfectly. It’s a classic case where chasing codes can be misleading; sometimes you have to look at the component that’s generating them.
n
nn
The Plug-and-Play Solution for Your GM Vehicle
n
Don’t settle for a generic, unprogrammed module that requires an expensive trip to the dealership for flashing and security relearns. We take the hassle and high cost out of the equation. When you purchase this ECM, we use the Vehicle Identification Number (VIN) you provide to flash the unit with the latest, most up-to-date GM-certified software specifically for your vehicle’s configuration. This ensures all systems, from the engine and transmission to the A/C and gauges, function exactly as they did from the factory.
n
This module is a direct replacement for a wide range of GM vehicles equipped with the 3.6L V6 engine and is compatible with the following part numbers:
n
- n
- 19300015
- 19300014
- 12617230
- 12636355
- 12635019
n
n
n
n
n
nn
Important Note for Camaro and LaCrosse Owners
n
Due to the specific vehicle anti-theft system (immobilizer) used in the 2010-2011 Camaro and Buick LaCrosse, a simple VIN flash is not enough to make the module fully plug-and-play. To ensure a seamless installation without the need for additional security programming, we require your original ECM. We will expertly extract the unique immobilizer data from your old unit and transfer it to your new one. This makes the replacement module completely synchronized with your vehicle’s keys and security system. After your purchase, we will contact you with simple instructions for sending your original module to us. This small step saves you hundreds of dollars in dealership programming fees and ensures your car starts right up.
nn
Frequently Asked Questions
Do I need to do any programming myself?
No. This ECM arrives at your door fully programmed to your vehicle’s VIN. For most compatible models, it is a direct plug-and-play installation. For Camaro and LaCrosse models, you will need to send us your original module for immobilizer data transfer to achieve the same plug-and-play result.
Why do you need my VIN?
Your VIN allows us to access the specific GM database for your exact vehicle. We use it to load the correct software calibration that matches your engine, transmission, emissions equipment, and other factory-installed options, ensuring perfect compatibility and performance.
What is the immobilizer and why do you need my old ECM for a Camaro?
The immobilizer is a security system that prevents the engine from starting without a recognized key. On the Camaro and LaCrosse, this security data is stored in the ECM. By transferring this data from your old unit to the new one, we make the new ECM ‘think’ it’s the original, allowing it to work with your existing keys without any further procedures.
Will this fix my check engine light?
If the check engine light is on due to an internal failure of the ECM, then yes, this part will resolve the issue. However, if the light is caused by a separate faulty sensor or component on the vehicle, that issue will still need to be addressed. This module will allow for accurate diagnosis of other potential problems.
Where is the ECM located on my vehicle?
The location varies by model. On many of the SUVs like the Traverse, Acadia, and Enclave, it’s located behind the fan shroud in the engine bay. On sedans like the CTS, LaCrosse, and Allure, it’s typically found in the engine compartment on either the left or right side. Always disconnect the battery before attempting removal or installation.
“,
“short_description”: “
Restore Your Engine’s Peak Performance!
n
Get a fully programmed 2010-2011 Camaro ECM (12617230) flashed to your specific VIN. This direct-fit module arrives ready for installation, eliminating guesswork and costly dealership programming. Provide your VIN at checkout to solve frustrating engine issues today!
“,
“meta_description”: “Experiencing issues with your 3.6L V6? Our pre-programmed 2010-2011 Camaro ECM is the solution. Flashed to your VIN for a perfect match. Order now!”,
“focus_keyword”: “2010-2011 Camaro ECM”,
“image_meta”: {
“alt_text”: “Programmed 2010-2011 Camaro ECM Engine Control Module 12617230, front view showing connectors.”,
“image_title”: “2010-2011 Camaro ECM 12617230“,
“caption”: “Direct-fit Engine Control Module (ECM) for 2010-2011 GM 3.6L vehicles, part number 12617230.”,
“description”: “Detailed image of the Engine Control Module (ECM/ECU) compatible with part number 12617230. This module fits the 2010-2011 Chevrolet Camaro, Buick LaCrosse, Cadillac CTS, and other GM models with the 3.6L V6 engine.”
}
}