2010-2011 Acadia ECM 12617230 Programmed to Your VIN

Restore Your Acadia’s Performance

Fix frustrating stalling, no-start conditions, and erratic engine behavior with this direct-fit ECM. It arrives pre-programmed to your vehicle’s VIN with the latest GM software, saving you a trip to the dealer. Get back on the road fast—order today!

$249.00

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01766-15 Categories: ,
Guaranteed Safe Checkout

Is Your 2010-2011 Acadia’s Engine Acting Unpredictably?

If you’re dealing with a frustrating no-start condition, intermittent stalling, a flickering check engine light, or a host of bizarre error codes that don’t seem related, the problem might not be a faulty sensor. After 20+ years of diagnosing these vehicles, I can tell you that the Engine Control Module (ECM)—the central computer for your engine—is often the hidden culprit behind these phantom issues.

The Common Symptoms of a Failing GM 3.6L ECM

A failing ECM doesn’t always die completely. More often, it begins to fail internally, causing symptoms that can mislead even experienced mechanics. You might be experiencing:

  • ✔ Unexplained stalling while driving or at idle.
  • ✔ Complete no-start condition where the engine cranks but won’t fire up.
  • ✔ A barrage of seemingly unrelated diagnostic trouble codes (DTCs), especially communication codes (U-codes).
  • ✔ Poor fuel economy and a noticeable loss of engine power.
  • ✔ Harsh or erratic shifting as the ECM fails to communicate properly with the Transmission Control Module (TCM).
  • ✔ Check engine light illuminated with codes like P0601, P0606, or other internal processor faults.

A Technician’s Real-World Story

“A customer’s 2011 Acadia came in last week with these exact symptoms. The owner had already replaced the throttle body and a camshaft position sensor based on the codes, but the stalling persisted. My scan tool showed fluctuating voltage readings from multiple sensors that made no sense. Instead of chasing ghosts, I focused on the ECM. After scoping the power and ground circuits to confirm they were solid, it was clear the ECM’s internal voltage regulator was failing, sending bad data throughout the system. This is a classic failure mode I’ve seen hundreds of times on this GM platform.”

The Solution: A Reliable, VIN-Programmed ECM

Don’t waste time and money replacing perfectly good parts. This Engine Control Module is the direct, effective solution to restore your vehicle’s performance and reliability. We take all the guesswork and dealership hassle out of the equation. When you order, we use the Vehicle Identification Number (VIN) you provide to flash the module with the latest, most stable software updates directly from GM. This isn’t a generic, one-size-fits-all part; it’s specifically prepared for your vehicle’s exact configuration.

How Our Programming Process Works for You:

  1. Place Your Order: Purchase this ECM for your vehicle.
  2. Provide Your VIN: After your purchase, simply send us your 17-digit VIN. This is crucial for a correct match.
  3. We Handle the Flashing: Our technicians will program the module with the newest GM software specific to your VIN. This ensures all parameters for your engine, transmission, and emissions equipment are correct.
  4. Shipped Ready for Installation: We ship the module directly to you, ready to be installed. In most cases, this eliminates the need for an expensive trip to the dealer for programming.

Important Note for Camaro and LaCrosse Owners

Due to the specific anti-theft (immobilizer) systems in the 2010-2011 Camaro and LaCrosse, a simple VIN flash is not enough to make the part fully plug-and-play. To ensure a seamless installation, we will need you to send us your original ECM. We will professionally extract the unique immobilizer data and transfer it to your new module. This critical step ensures your key is recognized and the vehicle starts without any additional security relearn procedures. We will contact you with shipping instructions after your purchase.

Guaranteed Compatibility

This module is a direct replacement for several part numbers and fits a wide range of GM vehicles equipped with the 3.6L engine. Please verify your vehicle is on this list to ensure proper fitment.

  • ✔ Part Numbers: 19300015, 19300014, 12617230, 12636355, 12635019
  • ✔ Buick Allure: 2010 (3.6L)
  • ✔ Buick Enclave: 2010-2011
  • ✔ Buick LaCrosse: 2010-2011 (3.6L)
  • ✔ Cadillac CTS: 2010-2011 (3.6L)
  • ✔ Cadillac STS: 2010-2011 (3.6L)
  • ✔ Chevrolet Camaro: 2010-2011 (3.6L)
  • ✔ Chevrolet Traverse: 2010-2011
  • ✔ GMC Acadia: 2010-2011
  • ✔ Saturn Outlook: 2010
Condition

Refurbished

MPN

12617230

Genuine OEM

Yes

Hardware Type

Year

2010-2011

Model

ACADIA

Brand

GM

Interchange part number

Manufacturer Part Number

, , , ,

Scroll to Top