Restore Full Functionality to Your GM Vehicle
Is your 2009-2012 Chevrolet Traverse or another compatible GM vehicle experiencing bizarre electrical issues? The Body Control Module, or BCM, is the central command center for your vehicle’s body electronics. When it fails, it can cause a cascade of frustrating problems, from flickering lights and malfunctioning power accessories to false warning messages on your dash. This replacement Body Control Module, part number 25892622, is the definitive solution to restore your vehicle’s proper operation.
From the Diagnostic Bay
We had a 2011 Traverse come in with a laundry list of complaints. The power locks would work intermittently, the radio would sometimes not turn on, and the ‘Service StabiliTrak’ light was a permanent fixture on the dash. The owner had already replaced the battery and checked fuses with no luck. After connecting our diagnostic tool, we saw multiple communication errors pointing towards the BCM. A failing BCM was creating a network storm, disrupting other modules. Installing a VIN-programmed BCM like this one resolved every single issue in one go, saving the customer from chasing down multiple phantom problems.
Common Failure Symptoms
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ Instrument cluster displaying incorrect information or warning lights (e.g., security, airbag).
- ✔ Remote keyless entry failing to respond.
- ✔ Vehicle’s security system acting up or preventing the car from starting.
- ✔ Unexplained battery drain when the vehicle is off.
Why Choose Our 2009-2012 Traverse BCM?
Getting your vehicle fixed shouldn’t be complicated. That’s why we offer a simple, effective solution. This BCM is not just a part; it’s a complete service. We take your vehicle’s VIN and program the module with the latest, most stable software directly from GM. This means you receive a part that is ready for installation, eliminating the need for expensive dealership programming. There is no core charge, so you can keep your old part.
Installation and Post-Install Steps
While this module is programmed for your vehicle, some systems may require a ‘handshake’ procedure after installation. This is standard for modern vehicles.
- Airbag System Sync: If the airbag light is on after you install the BCM, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure your brake lights and traction control systems function as intended.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Guaranteed Fitment for Multiple Part Numbers
This module is a direct replacement for a wide range of part numbers. If your original module has any of the following numbers, this part will work for you: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No. We handle all the programming for you before we ship the part. Simply provide us with your vehicle’s VIN during or after checkout, and we will flash the module with the latest GM software specific to your car.
How do I provide my VIN?
You can add your VIN in the notes section at checkout, or you can send it to us in a message after you complete your purchase. We cannot ship the module until we have your VIN.
Is this a plug-and-play installation?
It is ‘plug-and-programmed’. While the module is programmed to work with your vehicle’s options, some simple relearn procedures, like for the brake pedal position or airbag system, may be required after installation. This is normal for BCM replacement.
What if my airbag light comes on after I install it?
This indicates that the BCM needs to be synced with the airbag module (SDM). A procedure called ‘Setup SDM Primary Key in BCM’ must be performed with a professional-grade scan tool to resolve this.
My original part number is on your list, but it’s not 25892622. Will this part work?
Yes. This BCM is a compatible replacement for all the part numbers listed. GM often consolidates multiple part numbers into a single, updated replacement.