2009-2010 Wave ECM Electronic Control Module 12642927

Restore Your Vehicle’s Performance!

Get your car running smoothly again with this plug-and-play ECM. It comes fully programmed to your vehicle’s VIN with the latest GM software updates, eliminating the need for a costly dealership visit. A direct-fit solution for a variety of GM models. Order today to fix your engine issues!

$209.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01738-30 Categories: ,
Guaranteed Safe Checkout

Is Your Vehicle Running Rough? The ECM Might Be the Culprit.

If you’re dealing with a persistent Check Engine Light, poor fuel economy, stalling, or erratic engine behavior in your GM vehicle, a failing Engine Control Module (ECM) is a likely cause. The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it fails, it can cause a cascade of frustrating and difficult-to-diagnose problems. This replacement ECM, part number 12642927, is the definitive solution to restore your vehicle’s performance and reliability.

Expert Pro Tip
Before replacing your ECM, always perform a thorough check of your vehicle’s battery, alternator, and all primary ground connections. A weak battery or a poor ground can cause voltage fluctuations that mimic the symptoms of a failing ECM. Cleaning the battery terminals and ensuring the main engine-to-chassis ground strap is clean and tight can sometimes resolve these issues without needing a new module.

Common Symptoms of a Failing ECM

A faulty engine computer can manifest in various ways. If you’re noticing any of the following issues, it’s time to consider a replacement:

  • ✔ Persistent Check Engine Light (CEL) that won’t clear or returns immediately.
  • ✔ Engine stalling, stumbling, or misfiring for no apparent reason.
  • ✔ Noticeable decrease in fuel efficiency.
  • ✔ Harsh or erratic automatic transmission shifting.
  • ✔ Difficulty starting the engine, or a no-start condition.
  • ✔ Communication errors with diagnostic scan tools.
  • ✔ Loss of power and poor acceleration.

The Plug-and-Play Solution: A Programmed 2009-2010 Wave ECM

Don’t waste time and money at the dealership. We simplify the repair process by providing a direct-fit ECM that is professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN). This critical programming step ensures that the module communicates perfectly with your vehicle’s other systems, including the ignition, fuel system, and anti-theft security. We flash the unit with the latest GM-certified software updates, which can resolve factory bugs and improve overall vehicle operation. This means no expensive dealer programming is required on your end. For most applications, installation is as simple as disconnecting the battery, swapping the old module for the new one, and reconnecting the battery. In some cases, a simple security relearn procedure (often just a key cycle) may be necessary, which you can easily do yourself.

Guaranteed Compatibility

This Electronic Control Module is a direct replacement for several original part numbers, ensuring a perfect match for your vehicle. It is compatible with the following part numbers:

  • 12679199
  • 12642927
  • 12636386
  • 12621466
  • 12630789

This module is engineered to fit a range of GM models. Please verify your vehicle’s make, model, and engine size against the list below to ensure proper fitment:

  • CRUZE: 2011-2012 (1.8L Engine)
  • AVEO: 2009-2011
  • SPARK: 2013
  • WAVE: 2009-2010
  • TRAX: 2013-2014 (1.8L Engine)
  • SONIC: 2012 (1.8L Engine)
  • G3: 2009-2010

By choosing this pre-programmed 2009-2010 Wave ECM, you are getting a reliable, cost-effective component that restores your vehicle to its factory-specified operating condition. Get back on the road with confidence and leave those engine troubles behind.

Frequently Asked Questions

Do I need to have this ECM programmed by a dealer?

No. We handle all the programming for you before shipment. Simply provide us with your vehicle’s VIN during checkout, and we will flash the module with the latest GM software specific to your car. It will arrive ready to install.

What is a VIN and where can I find it?

The VIN is your vehicle’s unique 17-digit identification number. You can typically find it on a plate on the driver’s side dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.

Is any special security relearn procedure required after installation?

In most cases, this module is plug-and-play. However, some GM vehicles may require a simple security relearn procedure to sync the new ECM with the anti-theft system. This can usually be done without any special tools by cycling the ignition key and is detailed in instructions we can provide.

Will this fix my specific problem, like a P0606 error code?

Error codes like P0606 (ECM/PCM Processor Fault) are strong indicators of an internal module failure. While this ECM is the correct component to fix such issues, it’s always best to have a qualified mechanic confirm the diagnosis, as other issues like wiring problems can sometimes cause similar codes.

What happens if I don’t provide my VIN?

Providing your VIN is mandatory for this part. We cannot program and ship the module without it, as the programming is essential for the part to function in your vehicle. Your order will be placed on hold until the VIN is received.

Conditions & Options

Programmed to your VIN GM: 12621466

Year
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

2010-wave

Make

Year

2011, 2012

Brand

GM

Manufacturer Part Number

MPN

12642927

Scroll to Top