2009-2010 Commander Engine Computer ECM 68028167AB

Restore Your Jeep’s Performance Instantly

Get your 2009-2010 Commander or Grand Cherokee running right again with this fully programmed engine computer. It arrives flashed to your VIN and mileage for a true Plug & Play installation. Skip the expensive dealership trip and fix it yourself. Order now for a reliable, direct-fit solution!

$199.95

+11.99 USPS Priority Shipping

Out of stock

Guaranteed Safe Checkout

Is Your Jeep Commander or Grand Cherokee Running Rough?

If your 2009-2010 Jeep Commander or Grand Cherokee with the 3.7L V6 engine is experiencing frustrating issues like a persistent check engine light, stalling, erratic shifting, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the central brain of your vehicle, managing everything from fuel injection and spark timing to transmission shifting and emissions control. When it fails, it can cause a cascade of problems that are often misdiagnosed, leading to expensive and unnecessary repairs.

Don’t let a faulty computer keep you off the road. This direct-fit replacement Engine Control Module is the definitive solution to restore your Jeep’s performance, reliability, and drivability. We take all the guesswork and hassle out of the repair by pre-programming the unit specifically to your vehicle’s VIN and mileage. This means it arrives at your door ready for a true Plug & Play installation, completely eliminating the need for a costly trip to the dealership for programming.

From the Diagnostic Bay

We had a 2010 Grand Cherokee 3.7L come into the shop with a complaint of intermittent stalling and a check engine light for a random misfire (P0300). The owner had already replaced all the spark plugs, ignition coils, and even the camshaft position sensor based on advice from forums. The problem persisted. After hooking up our advanced scanner, we noticed the live data for the fuel trims was completely erratic. We suspected the ECM. Instead of guessing, we connected this pre-programmed module. The engine fired up instantly, idled smoothly, and all data readings returned to normal. The customer had spent hundreds on parts they didn’t need when the core issue was the computer all along. This highlights the importance of correctly identifying a faulty ECM to save time and money.

Common Symptoms of a Failing ECM

  • ✔ Check Engine Light: The most common sign, often with codes related to module communication, sensor circuits, or random misfires.
  • ✔ No-Start Condition: The engine cranks but refuses to start due to a lack of spark or fuel command from the ECM.
  • ✔ Poor Engine Performance: Noticeable loss of power, hesitation during acceleration, and rough idling.
  • ✔ Reduced Fuel Economy: The ECM can no longer efficiently manage the air-fuel mixture, causing your Jeep to consume more gasoline.
  • ✔ Automatic Transmission Problems: Harsh or erratic shifting, or getting stuck in a single gear (limp mode), as the ECM plays a key role in transmission control.
  • ✔ Intermittent Stalling: The engine may shut off unexpectedly while driving or when coming to a stop.

Installation and Benefits of the 2009-2010 Commander Engine Computer

Replacing the brain of your vehicle sounds intimidating, but we’ve made it simple. Because this unit is delivered fully programmed for your specific vehicle, the installation is straightforward. On the 2009-2010 Commander and Grand Cherokee, the ECM is located in the engine compartment on the right-hand (passenger) side. Simply disconnect the negative battery terminal, unplug the electrical connectors from the old module, unbolt it, and install the new one in its place. Reconnect the connectors and the battery, and you’re ready to go. There are no additional steps, no special tools, and absolutely no dealer intervention required.

This module is a direct replacement for a wide range of original part numbers, ensuring perfect compatibility. Please verify your part number against the comprehensive list provided to guarantee a perfect match for your vehicle.

Frequently Asked Questions

Is this module truly Plug & Play?

Yes, absolutely. We use the VIN and mileage you provide during checkout to program the module before it ships. When it arrives, you can install it directly into your vehicle without any need for further programming or dealer visits.

How do I provide my vehicle’s VIN and mileage?

You can enter your vehicle’s information during the checkout process. Please double-check the VIN for accuracy, as this is critical for correct programming.

Where is the ECM located on my 2009 Jeep Commander?

The Electronic Control Module (ECM) on the 2009-2010 Jeep Commander is located in the engine compartment, on the right-hand (passenger) side, typically near the firewall or inner fender.

Will this fix my transmission shifting problems?

In many cases, yes. The ECM is responsible for communicating with the transmission control module and managing shift points. If the ECM is faulty, it can cause a variety of transmission-related symptoms. Replacing it often resolves these issues.

Does this part come with a warranty?

Yes, all of our electronic modules are backed by our industry-leading warranty. Please see our warranty page for complete details and peace of mind with your purchase.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

68028167AB

Interchange part number

PartNumber

590

Model

COMMANDER

Year

2009

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top