Restore Peak Performance to Your 5.7L HEMI Engine
Is your 2009 Dodge Ram 1500, Durango, or other compatible vehicle suffering from perplexing engine issues? An erratic idle, sudden stalling, a persistent check engine light, or a complete no-start condition can often be traced back to a failing Engine Control Module (ECM). This module is the electronic brain of your vehicle, meticulously managing everything from fuel injection and ignition timing to transmission shifts and emissions control. When it falters, the entire vehicle’s performance and reliability are compromised. This replacement engine computer, part number 68059431AA, is the definitive solution to get your vehicle running like new again.
We take the guesswork and complexity out of the repair process. Unlike a generic module from a parts store or a salvage yard, this unit arrives at your doorstep fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This means there is no need for expensive trips to the dealership for flashing or programming. It’s a true plug-and-play solution designed for both professional technicians and savvy DIYers. Simply install the module, and your vehicle’s key systems will be restored to their original factory specifications.
I remember a 2009 Durango with the 5.7L that came in on a tow truck. The owner was frustrated because it would die intermittently while driving, with no specific codes stored other than a generic ‘loss of communication’ every so often. We checked the fuel pump, wiring harnesses, and sensors, but everything tested fine. On a hunch, we connected a scope to the ECM’s power and ground circuits and went for a drive. After about 15 minutes, we saw the voltage signal to the fuel injectors drop out completely just before it stalled. The ECM was internally failing under thermal load. Swapping in a pre-programmed module like this one had the customer back on the road in under an hour, problem solved permanently.
Common Symptoms of a Failing 2009 Dodge 1500 ECM
- ✔ Check Engine Light is illuminated with various, often inconsistent, trouble codes.
- ✔ Engine stalls unexpectedly or struggles to start.
- ✔ Noticeable decrease in fuel economy.
- ✔ Rough or erratic engine idle.
- ✔ Hesitation or stumbling during acceleration.
- ✔ Transmission shifting issues or getting stuck in ‘limp mode’.
- ✔ Complete no-start condition where the engine cranks but won’t fire.
Plug-and-Play Simplicity
The most significant advantage of this engine computer is the professional programming service included with your purchase. We flash the module with the latest OEM-authorized software and calibrate it precisely to your VIN. This ensures that all vehicle-specific parameters, including anti-theft systems (SKIM), are correctly configured. When you receive the part, the installation process is straightforward: disconnect the battery, locate and remove the old module, install the new one, reconnect the connectors, and then reconnect the battery. Your vehicle will start and run correctly without any additional procedures.
Direct-Fit Compatibility
This module is a direct replacement for a wide range of part numbers, ensuring a perfect fit and function. It is compatible with the following part numbers:
68059431AA, 05150390AE, 05150390AB, 05150390AC, 05150390AD, 68059192AA, 68059192AB, 68059192AC, 05150390AA, 68059192AD, 68028172, 68028173, 68028186, 68059293AA, 68059294AA, 68059295, 68059190, 68028160, 68028161, 68028180AE, 68028180.
This part will fit the following vehicles with the specified options:
- 2009 Aspen: Electronic Control Module; (RH fender), 5.7L, VIN 5 (6th digit)
- 2009 Durango: Electronic Control Module; 5.7L, engine ID EZD
- 2009 Commander: Electronic Control Module; (RH engine compartment), 5.7L
- 2009 Grand Cherokee: Electronic Control Module; (RH rear engine compartment), 5.7L
- 2009 Dodge 1500 Pickup: Electronic Control Module; 5.7L
Frequently Asked Questions
Is this ECM truly plug and play?
Yes. We program the module using your vehicle’s VIN before it ships. This ensures it is ready for installation right out of the box, with no need for a trip to the dealer for additional programming.
What information do you need from me to program it?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically provide this during the checkout process. The VIN is essential for correct programming.
Will this fix my check engine light?
If the check engine light is caused by a faulty ECM, this part will resolve the issue. However, it’s crucial to ensure that the underlying problem isn’t with a sensor or another component. We always recommend a proper diagnosis before ordering.
Where is the ECM located on my 2009 Dodge 1500?
On the 2009 Dodge 1500 Pickup, the Electronic Control Module is typically located in the engine bay, mounted to the passenger-side firewall or inner fender. Always disconnect the vehicle’s battery before attempting to remove or install the module.
Do I need to send my old part back?
This purchase does not typically require a core return. You can keep or responsibly dispose of your old module. Please check the specific terms of the sale on the product page.