2008 Pontiac G6 ECM Engine Control Module 12612384 Programmed

Restore Your 2008 G6’s Performance

Is your Pontiac G6 stalling, not starting, or showing a check engine light? This Engine Control Module (ECM) is the fix. It arrives pre-programmed to your VIN with the latest GM software for a simple, plug-and-play installation. No dealership visit required! Get back on the road fast—order today!

$122.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00882-1 Categories: ,
Guaranteed Safe Checkout

Is Your 2008 Pontiac G6 or GM Vehicle Running Erratically?

As a technician with over two decades of experience under the hood, I’ve seen it all. A car comes into the bay with a laundry list of bizarre symptoms: it stalls at stoplights, refuses to start on cold mornings, the transmission shifts harshly, and the check engine light is a permanent fixture on the dashboard. The owner has often replaced a few sensors, but the problems persist. This is a classic scenario pointing directly to the heart of the vehicle’s electronic system: a failing Engine Control Module (ECM).

The ECM, or Powertrain Control Module (PCM), is the central computer for your vehicle. It’s responsible for making thousands of calculations per second to manage everything from fuel mixture and ignition timing to transmission shift points and emissions controls. When it starts to fail, the entire vehicle’s performance and reliability can fall apart.

Common Symptoms of a Failing 12612384 ECM

If you’re experiencing any of the following, a faulty ECM is a likely culprit. I’ve personally diagnosed these exact issues on hundreds of GM vehicles that use this specific module.

  • ✔ Check Engine Light (CEL) is on, often with communication error codes (U-codes) or multiple, unrelated sensor codes.
  • ✔ The engine cranks but refuses to start.
  • ✔ Sudden stalling while driving or idling.
  • ✔ Noticeable decrease in fuel economy.
  • ✔ Harsh or erratic automatic transmission shifting.
  • ✔ The vehicle enters a reduced power or “limp” mode.
  • ✔ Your scan tool cannot communicate with the ECM.

Expert Pro Tip: Don’t Get Chasing Ghosts

Before condemning your ECM, it’s crucial to perform a basic but vital check. I always start by verifying the power and ground circuits at the ECM connector using a multimeter. A common issue I’ve seen in my shop is a corroded ground wire or a faulty power feed from the fuse box causing ECM-like symptoms. Checking for stable battery voltage and clean grounds at the module can save you from replacing a perfectly good part. If powers and grounds are solid, but you still have no communication or erratic behavior, the ECM itself is the prime suspect.

The Solution: A Reliable, Pre-Programmed ECM

Replacing the ECM used to mean a costly part followed by an expensive trip to the dealership for programming. We’ve eliminated that hassle. This Engine Control Module is the definitive solution, arriving at your doorstep ready for installation. Here’s what makes our process the best choice for your repair:

  • ✔ VIN-Specific Programming: We don’t just send you a part. You provide us with your vehicle’s 17-digit VIN, and we flash the module with the latest, most stable software updates directly from GM. This ensures perfect compatibility with your vehicle’s specific options and systems.
  • ✔ Plug-and-Play Installation: Because the programming is done beforehand, you can install it yourself or have your local mechanic do it without needing specialized GM diagnostic tools. In most cases, a security relearn procedure may be required, which is a simple process that can be done without any special tools.
  • ✔ Restored Performance: A new, properly functioning ECM will restore your vehicle’s original performance, fuel efficiency, and smooth operation, resolving those frustrating drivability issues for good.

Guaranteed Compatibility

This module, part number 12612384, is a direct replacement for service numbers 12622141 and 12617568. It is engineered to fit a wide range of GM vehicles. Please verify your model and engine options from the list below to ensure a perfect match.

Vehicle Fitment List:

Fits Pontiac:

  • ✔ 2008 G6 (3.5L or 3.9L Engine)
  • ✔ 2008-2009 Torrent (3.4L Engine)

Fits Chevrolet:

  • ✔ 2008 Avalanche 1500
  • ✔ 2011 Caprice (ID 12612384)
  • ✔ 2008-2009 Corvette
  • ✔ 2008-2009 Equinox (3.4L Engine)
  • ✔ 2008 Express Vans (1500, 2500, 3500 Gasoline)
  • ✔ 2008 Impala (3.5L or 3.9L Engine)
  • ✔ 2008 Malibu (Classic & New Style, 3.5L Engine)
  • ✔ 2008 Silverado Pickups (1500, 2500, 3500 w/o 4.3L, 6.0L)
  • ✔ 2008 Suburban (1500 & 2500)
  • ✔ 2008 Tahoe (w/o hybrid)

Fits GMC, Cadillac, Saturn, Buick & Hummer:

  • ✔ 2008 Saturn Aura (3.5L Engine)
  • ✔ 2008-2009 Saturn VUE (3.5L Engine)
  • ✔ 2008 Cadillac CTS (3.6L, VIN 7, ID 12612384)
  • ✔ 2008 Cadillac Escalade, ESV, EXT
  • ✔ 2008 Hummer H2
  • ✔ 2008 Savana Vans (1500, 2500, 3500 Gasoline)
  • ✔ 2008 Sierra Pickups (1500, 2500, 3500, Denali w/o 4.3L, 6.0L)
  • ✔ 2008 Yukon & Yukon XL (1500 & 2500, w/o hybrid)

Don’t let a faulty computer keep your car off the road. Order this pre-programmed ECM today and restore your vehicle’s brainpower and reliability with confidence.

Genuine OEM

Yes

Condition

Refurbished

MPN

12612384

Interchange part number

Type

E38

Model

G6

Year

2008

Brand

GM

Manufacturer Part Number

, ,

Scroll to Top