2008 Isuzu I-370 Engine Control Module ECM 12630457 VIN Programmed

Restore Your Isuzu’s Performance!

Fix stalling, no-start conditions, and check engine lights in your 2008 Isuzu I-370 with this pre-programmed Engine Control Module. It arrives flashed to your VIN with the latest GM software, saving you a trip to the dealer. Get back on the road fast. Order today!

$118.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08112-217 Categories: ,
Guaranteed Safe Checkout

Is Your 2008 Isuzu I-370 Running Rough or Not Starting?

If you’re dealing with baffling electrical gremlins in your Isuzu I-370, you know how frustrating it can be. One moment the truck runs fine, the next it’s cranking but won’t start, the check engine light is on with a dozen codes, or it’s shifting erratically. As a technician with over two decades of experience, I’ve seen these exact issues countless times, and they often point to one critical component: a failing Engine Control Module (ECM).

A Real-World Diagnostic Story

“A customer’s 2008 Isuzu I-370 came in last week with these exact symptoms. It had a persistent no-start condition that would come and go. The owner had already replaced the battery and checked the fuel pump. When I connected my scan tool, I had intermittent communication with the ECM. That’s a huge red flag. After verifying the ECM had solid power and ground at the connector on the RH firewall, and checking the CAN bus network for shorts, it was clear the module itself was internally failing. Heat and vibration, common in that engine bay location, had taken their toll on the delicate internal circuits.”

The Brain of Your Engine: Why the ECM is Crucial

The ECM is the central computer for your truck’s powertrain. It takes information from dozens of sensorsโ€”like the crankshaft position sensor, oxygen sensors, and throttle position sensorโ€”and uses that data to make thousands of calculations per second. It controls everything from fuel injection and ignition timing to transmission shift points and emissions equipment. When it fails, the symptoms can be widespread and confusing.

Common Symptoms of a Failing I-370 ECM:

  • โœ” Check Engine Light (CEL) is illuminated with various, often unrelated, trouble codes.
  • โœ” Engine cranks but refuses to start.
  • โœ” Stalling, stumbling, or rough idling for no apparent reason.
  • โœ” Noticeable decrease in fuel economy.
  • โœ” Automatic transmission shifting harshly or at the wrong times.
  • โœ” Loss of communication with the ECM when using a diagnostic scan tool.
  • โœ” Other warning lights on the dash, such as for the traction control system.

The Hassle-Free Solution: A VIN-Programmed ECM

In the past, replacing an ECM meant buying the part, installing it, and then having your vehicle towed to a dealership for expensive programming. This module eliminates that entire ordeal. We take your vehicle’s 17-digit VIN and flash this ECM with the latest, most stable software directly from GM. This ensures all factory-issued patches and performance improvements are loaded before it even ships.

This isn’t just a convenience; it’s critical for proper function. The software is specific to your truck’s engine, transmission, and options. Our process guarantees that the module you receive is a perfect match for your vehicle’s configuration.

What You Get:

  • โœ” A quality, tested Engine Control Module.
  • โœ” Professional VIN-programming with the newest GM software updates.
  • โœ” A direct-fit replacement, ready for installation.
  • โœ” No need for a trip to the dealer for programming.

Installation and Important Next Steps

Installation is straightforward for a DIYer with basic tools. The ECM on the 2008 Isuzu I-370 is located on the right-hand (passenger side) firewall in the engine bay.

IMPORTANT: After installing the new ECM, you will need to perform a Security Relearn Procedure (also known as a Passlock Relearn). This syncs the new module with your vehicle’s anti-theft system. It’s a simple process that doesn’t require any special tools and typically involves a sequence of turning the key on and off. We include instructions to make this final step easy.

Part Number Compatibility

This module, service number 12630457, is a direct replacement for several other part numbers. Please verify your original part number to ensure compatibility. This ECM is interchangeable with the following numbers:

  • โœ” 12590032
  • โœ” 12602044
  • โœ” 12603530
  • โœ” 12605843
  • โœ” 12607096
  • โœ” 19210737

Don’t let a faulty computer keep your reliable Isuzu off the road. Order this VIN-programmed ECM today and restore your truck’s performance and dependability.

Genuine OEM

Yes

Condition

Refurbished

MPN

12630457

Interchange part number

PartNumber

590

Model

isuzu-i-370

Year

2009

Brand

GM

Manufacturer Part Number

, , , , ,

Hardware Type

Scroll to Top