2008-2013 CTS Body Control Module 15921353 with Cloning Service

Restore Your Cadillac’s Electrical System.

Tired of erratic lights, failing power accessories, or a no-start condition in your CTS? This Body Control Module, complete with our plug-and-play cloning service, is the permanent fix. We transfer your vehicle’s data to this replacement unit, eliminating the need for expensive dealer programming. Get your luxury car’s features working flawlessly again. Order today for a simple, reliable solution!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-641 Categories: ,
Guaranteed Safe Checkout

Restore Full Functionality to Your Cadillac with a Plug-and-Play BCM

If you’re dealing with bizarre electrical issues in your 2008-2013 Cadillac CTS—like power windows with a mind of their own, malfunctioning door locks, a security light that won’t turn off, or even a no-start condition—the Body Control Module (BCM) is the most likely culprit. As the central command center for your vehicle’s body electronics, its failure can cause a cascade of frustrating and unpredictable problems. This isn’t just an inconvenience; it can be a serious safety concern when lights or security systems fail. This listing offers a direct-fit replacement BCM, pre-configured with our professional cloning service to get you back on the road without the high cost and hassle of a dealership visit.

A Technician’s Notebook: The Phantom Drain Mystery

A customer brought in a 2011 CTS with a battery that would die overnight. We checked the alternator and battery, both were fine. After hours of parasitic draw testing, we traced the issue to the BCM. It was failing to put other modules to sleep after the car was turned off, causing a constant, low-level power drain. Swapping in a cloned BCM solved the problem instantly. It’s a classic example of how a faulty 2008-2013 CTS Body Control Module can cause symptoms that seem completely unrelated at first glance.

What is Our Cloning Service?

A new BCM from the dealer requires expensive programming to sync it with your car’s unique Vehicle Identification Number (VIN) and specific options. Our cloning service eliminates this step entirely. You simply send us your original BCM, and we transfer all of its critical data—including VIN, mileage, and key programming—to this replacement unit. The result? A module that is 100% plug-and-play. No additional programming or calibration is needed for most vehicles. We’ll even ship your original module back to you with the ready-to-install replacement.

Common Signs of a Failing GM BCM

  • ✔ Erratic or non-functional power windows, locks, and mirrors.
  • ✔ Interior or exterior lights staying on or not working at all.
  • ✔ The anti-theft or security system light flashing, preventing the car from starting.
  • ✔ False warnings on the instrument cluster (e.g., ‘Service Airbag’).
  • ✔ Communication loss codes, such as U0140 (Lost Communication With Body Control Module), stored in other modules.
  • ✔ Unexplained battery drain when the vehicle is off.

A Straightforward Guide to Installation

  1. ✔ Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the system capacitors to discharge.
  2. ✔ Locate the BCM: On the 2008-2013 CTS, the BCM is typically located on the left-hand (driver’s) side of the dash, often behind the lower trim panel. Refer to a service manual for the exact position.
  3. ✔ Remove the Old Module: Carefully disconnect all electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
  4. ✔ Install the New Module: Mount your new, cloned 2008-2013 CTS Body Control Module in place and securely reconnect all electrical harnesses. Ensure they click into place.
  5. ✔ Final Steps: Reconnect the negative battery terminal. Turn the key to the ‘On’ position (without starting) and test all body functions—windows, locks, lights, etc. Note any post-install procedures that may be required for your specific vehicle.

Important Post-Installation Information

While our cloning service makes this a plug-and-play repair, some GM vehicles may require simple relearn procedures for full system integration:

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
  • Brake Pedal Position Relearn: On certain models, a brake pedal position sensor relearn may be required to ensure correct brake light and traction control operation.

Disclaimer: Vehicle systems vary. Always consult a factory service manual or a qualified technician if you are unsure about any step of the process.

Guaranteed Vehicle Compatibility

This module is a direct replacement for part number 15921353 and is compatible with a wide range of GM vehicles. It interchanges with the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084. It fits the following models (please verify location and specific ID if noted):

ACADIA 07-12 (LH dash)
AVALANCHE 1500 10 (under steering column)
CAPRICE 11-13
CAPTIVA SPORT 12 (center dash)
CTS 08-13 (LH dash)
DTS 06-11 (RH center dash)
ENCLAVE 08-12 (LH dash)
EQUINOX 07-09 (center dash)
ESCALADE 10 (under steering column)
ESCALADE ESV 10 (under steering column)
ESCALADE EXT 10 (under steering column)
EXPRESS 1500 VAN 08-12 (center dash)
EXPRESS 2500 VAN 08-12 (center dash)
EXPRESS 3500 VAN 08-12 (center dash)
G8 08-09 (center dash)
HUMMER H2 08-09 (LH firewall)
IMPALA 06-13 (LH dash)
LUCERNE 06-11 (right side dash)
MONTE CARLO 06-07 (LH steering column)
OUTLOOK 07-10 (center dash)
SAVANA 1500 VAN 08-12 (center dash)
SAVANA 2500 VAN 08-12 (center dash)
SAVANA 3500 VAN 08-12 (center dash)
SRX 07-09 (LH dash)
STS 10 (center dash)
SUBURBAN 1500 10 (under steering column)
TAHOE 10 (under steering column)
TORRENT 07-09 (center dash)
TRAVERSE 09-12 (LH dash)
VUE 08-10 (center dash)
YUKON 10 (under steering column)
YUKON XL 1500 10 (under steering column)

Frequently Asked Questions

Do I need to send you my VIN?

Do I need to send you my VIN?

No, a VIN is not required for the cloning service. We only need your original BCM. The cloning process transfers your car’s existing VIN and all other necessary data directly from your old module to the new one.

Is this BCM truly plug-and-play?

Yes, because we clone your original module’s data, the replacement unit will be recognized by your vehicle’s other computers as the original. This eliminates the need for any dealer programming. Just install it, and you’re ready to go, though some models may require the simple relearn procedures mentioned above.

What happens to my old BCM?

We always return your original (core) module to you along with the fully prepared replacement unit. We do not keep your old part.

How do I know if my BCM is actually the problem?

The BCM controls many different electronic components. If you are experiencing multiple, seemingly unrelated electrical issues like the ones listed in the symptoms section, the BCM is a very strong possibility. A professional diagnosis with a high-end scan tool that can communicate with the BCM is the best way to confirm the failure.

Genuine OEM
Condition
MPN

15921353

Interchange part number
PartNumber
Model

CTS

Year
Brand
Manufacturer Part Number
Scroll to Top