2008-2013 CTS Body Control Module 15093910 | Cloning Service

End Your CTS Electrical Nightmares.

Stop dealing with flickering lights, dead batteries, and random warning messages. This Body Control Module for your 2008-2013 Cadillac CTS comes with our expert cloning service. We transfer your vehicle’s data to the new module, so it arrives ready to install—no dealer programming needed. Restore your car’s reliability and function with this simple, effective solution. Order today to get your CTS working properly again!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-352 Categories: ,
Guaranteed Safe Checkout

Restore Your Cadillac’s Electrical System with a Plug-and-Play BCM

If your 2008-2013 Cadillac CTS is plagued by bizarre electrical issues—flickering lights, malfunctioning power windows, a security system that acts up, or even a no-start condition—a failing Body Control Module (BCM) is the likely culprit. As the central command for your vehicle’s body electronics, a faulty BCM can create a cascade of frustrating and unpredictable problems. This isn’t just an inconvenience; it can affect your car’s safety and reliability. I’ve spent over two decades under the hoods of cars just like yours, and I’ve seen how a bad BCM can turn a luxury vehicle into a source of daily stress.

We offer a straightforward, reliable solution. This isn’t just a part in a box; it’s a comprehensive service designed to get you back on the road without the exorbitant costs and scheduling headaches of a dealership visit. By choosing our Cloning Service, you bypass the need for expensive diagnostic tools and programming. We transfer the exact data from your original BCM to this replacement unit, ensuring it’s a perfect match for your vehicle’s specific configuration and options. It arrives at your door ready for installation, loaded with the latest GM software updates for optimal performance.

Case Study: A Tricky Diagnosis

A customer brought in a 2011 CTS that would intermittently fail to start and had the radio and interior lights cutting out randomly. They had already replaced the battery and alternator with no success. After hooking up my scan tool, I noticed several U-codes (communication loss) pointing to the BCM. Instead of a costly diagnostic path, we confirmed the BCM was the issue by checking power and ground at the module. A simple swap with one of our cloned units solved every single symptom. This is a classic example of how a failing 2008-2013 CTS Body Control Module can mimic other problems, costing you time and money if not diagnosed correctly.

Is Your Cadillac Showing These Symptoms?

A failing BCM can manifest in numerous ways. If you’re noticing any of the following, it’s time to consider a replacement:

  • ✔ Erratic or non-functional interior and exterior lights (headlights, dome lights, dash lights).
  • ✔ Power windows, locks, or mirrors working intermittently or not at all.
  • ✔ The anti-theft or security system light staying on, preventing the car from starting.
  • ✔ False warnings on the instrument cluster (e.g., “Service Airbag,” “Service StabiliTrak”).
  • ✔ Communication error codes, particularly U-codes (e.g., U0140, U0155) stored in the system.
  • ✔ Rapid battery drain when the vehicle is off, caused by the BCM failing to go into sleep mode.

Your Straightforward BCM Installation Guide

Installing your cloned 2008-2013 CTS Body Control Module is a manageable job for a DIY enthusiast. Because we’ve handled the programming, your job is the physical swap. Always refer to a service manual for your specific vehicle, but here is a general guide:

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
  2. Locate the BCM: On the 2008-2013 Cadillac CTS, the BCM is typically located on the left (driver’s) side of the dashboard, often behind the lower dash panel or near the steering column.
  3. Access the Module: You will likely need to remove a lower dash trim panel to gain access. This is usually held in by a few clips and screws.
  4. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, remove any bolts or clips holding the module in its bracket and take it out.
  5. Install the New Module: Seat the new, cloned BCM into the mounting bracket and secure it. Reconnect all electrical connectors, ensuring they click firmly into place.
  6. Reassemble and Reconnect: Reinstall the trim panel you removed. Reconnect the negative battery terminal.
  7. Perform Final Checks: Start the vehicle and test all body functions—lights, windows, locks, etc. Pay attention to any warning lights on the dash and refer to the post-installation procedures below if needed.

Important Post-Installation Steps

While our cloning service makes this a plug-and-play process, some GM vehicles require a relearn procedure to sync related systems. This is normal. You may need a professional-grade scan tool for these steps:

  • Airbag System Sync: If the airbag light is on after installation, a “Setup SDM Primary Key in BCM” procedure is needed to sync the airbag system with the new BCM.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure your brake lights and traction control system function correctly.

Disclaimer: Always consult a factory service manual or a qualified technician for procedures specific to your vehicle.

Verified Vehicle Compatibility

This BCM, part number 15093910, is compatible with a wide range of GM vehicles. Please verify your part number is on this list before ordering. We program the module specifically for the VIN you provide, ensuring it works for your exact model.

This module replaces the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

Primary Fitment:
CADILLAC CTS 2008-2013 Body Control (BCM); LH dash

Also fits these makes and models (verify part number and location):
ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, YUKON XL 1500 10.

Frequently Asked Questions

Frequently Asked Questions

How does the Cloning Service work?

After you place your order, you will ship your original BCM to us. We extract the vehicle-specific data and transfer it to the replacement module. This makes the new unit a perfect electronic match for your car, eliminating the need for dealership programming. We then ship both your original module and the ready-to-install replacement back to you.

Do I need to send you my VIN?

Yes. Along with cloning your original module, we use your VIN to load the absolute latest software and calibrations from GM. This ensures your vehicle’s systems are fully up-to-date for optimal function and reliability.

What is your core policy? Do you keep my old BCM?

We do not require a core deposit because we always return your original module to you along with the programmed replacement. You get to keep your original part.

Is this a guaranteed fix for my car’s problems?

This part is a solution for a failing BCM. While the symptoms listed are very common for BCM failure, it’s essential to have your vehicle properly diagnosed by a professional. This ensures you are replacing the correct part and will resolve your issues.

What tools are needed for the post-installation procedures?

Procedures like the Airbag System Sync or Brake Pedal Position Relearn typically require a bi-directional scan tool (like a Tech 2, Snap-on, or high-end Autel). Most DIY code readers cannot perform these functions. If you don’t have one, a local independent shop can perform these relearns for you quickly.

Genuine OEM

Yes

Condition

Refurbished

MPN

15093910

Interchange part number

PartNumber

591

Model

CTS

Year

2013

Brand

GM

Manufacturer Part Number

Scroll to Top