2008-2012 Savana 2500 Body Control Module BCM 25934762 Programmed

Restore Your Van’s Electrical System

Get a reliable, VIN-programmed Body Control Module for your 2008-2012 Savana 2500. This BCM arrives ready for installation with the latest GM software, eliminating the need for a costly dealership visit. Fix common electrical issues like flickering lights, dead gauges, and no-start problems. No core charge required. Order today for a plug-and-play solution!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1167 Categories: ,
Guaranteed Safe Checkout

Restore Full Electrical Function to Your GM Vehicle

Is your 2008-2012 GMC Savana 2500 experiencing bizarre electrical problems? Flickering lights, malfunctioning power windows, a dead instrument cluster, or a no-start condition can often be traced back to a single, critical component: the Body Control Module (BCM). As the central nervous system for your vehicle’s body electronics, a failing BCM can create a cascade of frustrating and unpredictable issues. This replacement Body Control Module, part number 25934762, is the definitive solution to restore your vehicle’s reliability and functionality.

Unlike a standard part from a dealership or salvage yard, this BCM arrives at your door fully programmed to your specific vehicle. We use your Vehicle Identification Number (VIN) to flash the module with the latest, most stable software updates directly from GM. This means no expensive trips to the dealer for programming, no special tools required for software setup, and a dramatically simplified installation process. It’s designed to be a direct-fit, plug-and-play solution to get your van back on the road and working as it should.

From the Diagnostic Bay

We had a 2011 Express work van come into the shop that was driving the owner crazy. The dome lights would stay on, the radio would randomly shut off, and worst of all, the battery would be dead every other morning. The owner had already replaced the battery and alternator twice. We connected our scanner and saw a flood of communication errors all pointing towards the BCM. Instead of a simple part swap, we sourced a VIN-programmed module. After a 15-minute installation, all the ghost-like electrical gremlins were gone. The van started reliably, and all accessories worked perfectly. It’s a classic case where the central computer was causing system-wide chaos, and a pre-programmed module was the fastest, most effective fix.

Is Your Savana 2500 Body Control Module Failing?

A faulty BCM doesn’t always fail completely. It often starts with intermittent issues that can be difficult to diagnose. If you’re noticing any of the following symptoms, it’s a strong indicator that your BCM needs attention:

  • ✔ Power windows, locks, or mirrors working intermittently or not at all.
  • ✔ Interior or exterior lights flickering, staying on, or not turning on.
  • ✔ Instrument cluster gauges behaving erratically or going completely dark.
  • ✔ The security or anti-theft system preventing the engine from starting.
  • ✔ Wipers or climate control functions operating incorrectly.
  • ✔ False warning lights appearing on the dashboard (e.g., airbag, ABS).
  • ✔ Key fob not responding or intermittent remote start issues.

Plug-and-Play Solution with the Latest Software

The key benefit of this module is the professional programming service included with your purchase. A BCM must be perfectly matched to your vehicle’s specific options and security protocols to function. We handle this critical step for you. Simply provide your VIN during checkout, and our technicians will load the correct GM-certified software and key data onto the module. This ensures seamless integration with your vehicle’s other computers, like the Engine Control Module (ECM) and Transmission Control Module (TCM).

Installation and Post-Install Considerations

Installation is straightforward for anyone with basic mechanical skills. The BCM is typically located under the dashboard on the driver’s side. After disconnecting the battery, you simply unplug the electrical connectors from the old module, unbolt it, and install the new one in its place. While our programming handles the majority of the setup, some vehicles may require additional relearn procedures for specific systems:

  • Airbag System Sync: If your airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure may be needed. This requires a professional-grade scan tool to sync the new BCM with the airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and traction control functionality.

Always consult a factory service manual for your specific vehicle for detailed instructions and diagrams.

Frequently Asked Questions

How do I provide my VIN for programming?

After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot ship your part until we receive and validate your VIN, as this is essential for the programming process.

Is this a plug-and-play part?

Yes, for most vehicles this is a direct plug-and-play installation. Because we program it to your VIN, you avoid the need for dealer-level programming tools. However, as noted, some vehicles may require minor relearn procedures for systems like the airbag or brake pedal sensor.

Do I need to return my old BCM?

No, there is no core charge for this part. You can keep your original module, which can be useful for diagnostic comparison if needed.

Will this fix my specific electrical issue?

This module corrects issues directly caused by a failing BCM. While the symptoms listed are common indicators, we always recommend a proper diagnosis by a qualified technician to confirm the BCM is the root cause of your problem before ordering.

What if my original part number is not 25934762?

This module is a direct replacement for a wide range of GM part numbers, as listed in the product details. As long as your original part number is on our cross-reference list and your vehicle model is compatible, this module will work correctly once programmed to your VIN.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

25934762

Interchange part number

PartNumber

591

Model

savana-2500

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top