2008-2012 Savana 2500 BCM 15921353 | VIN Programmed Cloning Service

Restore Your Van’s Electrical System with a Reliable, Programmed BCM

Is your GMC Savana or Express van acting possessed? Flickering lights, malfunctioning power windows, a security system that randomly engages, or a dashboard lit up with warning lights are all classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can cause a cascade of frustrating and hard-to-diagnose issues. In my 20+ years in the shop, I’ve seen how a bad BCM can turn a dependable workhorse into a source of constant headaches. Don’t let electrical gremlins keep you off the road or drain your wallet with expensive dealership diagnostic fees.

This is a direct-fit replacement Body Control Module, arriving at your door fully programmed to your vehicle’s specific VIN. We load the latest GM-certified software before it ships, ensuring seamless integration and optimal performance. This crucial step eliminates the need for expensive programming at a dealership, saving you time and hundreds of dollars. Simply provide your VIN at checkout, and we’ll handle the rest, delivering a part that’s ready for installation right out of the box.

Is Your Vehicle Showing These Symptoms?

A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, your Body Control Module is the likely culprit:

• ✔ Power windows, locks, or mirrors operating erratically or not at all.
• ✔ Interior or exterior lights flickering, staying on, or not turning on.
• ✔ The security or anti-theft system preventing the vehicle from starting.
• ✔ Inaccurate gauge readings on the instrument cluster.
• ✔ The radio or infotainment system malfunctioning.
• ✔ Communication error codes, such as U0140, U0155, or other U-series codes, stored in the system.
• ✔ A persistent battery drain when the vehicle is off.

Your Straightforward BCM Installation Guide

Replacing the BCM in your Savana or Express van is a manageable job for a DIYer with basic tools. Follow these steps for a successful installation:

1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure the system is fully discharged.
2. Locate the BCM: On most Savana and Express vans, the Body Control Module is located in the center dash area, often accessible by removing lower dash panels. Consult a vehicle-specific guide for the exact location.
3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the old module from its mounting bracket.
4. Install the New Module: Mount your new, pre-programmed BCM in the same location. Securely plug in all the electrical connectors, ensuring each one clicks into place.
5. Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—lights, locks, windows, radio, etc.—to confirm proper operation.
6. Perform Relearns (If Needed): As noted below, some vehicles may require a ‘Setup SDM Primary Key’ or ‘Brake Pedal Position Relearn’ procedure if specific warning lights appear. This typically requires a professional scan tool.

Important Post-Installation Information

While this module is programmed for your VIN, some vehicle security and safety systems may require a final handshake after installation. Please be aware of the following potential procedures:

• Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the systems. This must be done with a bi-directional scan tool.
• Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure correct brake light and traction control functionality.

Note: We always return your original module with your order; we do not require it as a core.

Verified Vehicle Compatibility

This BCM is a direct replacement for a wide range of GM vehicles and part numbers. Please verify your vehicle is on this list. This unit replaces part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.