2008-2012 Express 1500 BCM 95151084 Cloning Service

Tired of Electrical Gremlins in Your Express Van?

As a technician with two decades of experience, I’ve seen it all. A work van that won’t start one minute but is fine the next. Power windows with a mind of their own. A security light that flashes for no reason, leaving you stranded. These frustrating, intermittent electrical problems often point to one culprit: a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, controlling everything from interior lights and power locks to the instrument cluster and security system. When it fails, it can cause widespread and confusing issues.

This isn’t just another part. This is a complete solution. We offer a professional cloning service for this BCM. You send us your original module, and we transfer all of its critical, vehicle-specific data—including VIN, mileage, and key information—to this replacement unit. The result? You receive a module that is truly plug-and-play. You can avoid the expensive trip to the dealership for programming, saving you time, money, and the headache of a tow bill. It’s the most efficient way to get your workhorse back on the road and earning its keep.

Is Your Vehicle Showing These Symptoms?

• ✔ Erratic or non-functional power windows, door locks, or interior lighting.
• ✔ The security or anti-theft light stays on, preventing the engine from starting.
• ✔ Instrument cluster gauges behaving strangely or not working at all.
• ✔ Communication error codes, such as U0140, stored in other modules.
• ✔ Horn honking unexpectedly or not working when pressed.
• ✔ Wipers turning on by themselves or not responding to the switch.

Your Straightforward BCM Installation Guide

Installing your cloned 2008-2012 Express 1500 BCM is a manageable job for a confident DIYer or any professional technician. In most Express and Savana vans, the BCM is located behind the center dash panel.

1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
2. Access the Module: Carefully remove the dash trim panels necessary to access the BCM. This may involve removing the radio or climate control head unit.
3. Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
4. Install the New Module: Mount your new, cloned BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
5. Reassemble and Reconnect: Reinstall the dash components you removed. Once everything is back together, reconnect the negative battery terminal.
6. Final Checks: Start the vehicle and test all body functions—lights, locks, windows, wipers, and horn—to confirm the repair was successful.

Important Post-Installation Steps

Thanks to our cloning service, additional programming is not required. However, depending on your vehicle’s specific configuration, a couple of system relearns may be necessary:

• Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible high-level scan tool. This syncs the security handshake between the airbag system and the new BCM.
• Brake Pedal Position (BPP) Relearn: Some models may require the BPP sensor to be recalibrated. This ensures the brake lights and stability control systems function correctly.

Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician for procedures specific to your vehicle.

Verified Vehicle Compatibility

This Body Control Module is a direct replacement for part number 95151084 and interchanges with a wide range of other part numbers. It fits numerous GM cars, trucks, and SUVs. Please verify your part number and check the list below. If you have questions, provide us with your VIN, and we can confirm compatibility.

Frequently Asked Questions