2008–2010 VUE Body Control Module BCM 25892622 | Programmed to Your VIN

Restore Your Vue’s Electrical System!

Fix frustrating electrical problems like faulty power windows, locks, and security lights with this BCM for 2008-2010 Saturn Vue. It arrives fully programmed to your VIN for a simple, plug-and-play installation. No dealer visit required! Get back on the road fast—order yours today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1111 Categories: ,
Guaranteed Safe Checkout

Is Your 2008-2010 Saturn Vue Plagued by Bizarre Electrical Issues?

If your power windows have a mind of their own, your interior lights won’t turn off, the security light is flashing, or your key fob suddenly stopped working, you’re likely dealing with a failing Body Control Module (BCM). As a technician with over 20 years of experience, I’ve seen these exact issues countless times. The BCM is the central command for your vehicle’s body electronics, and when it fails, it can create a cascade of frustrating and seemingly unrelated problems.

The Easiest Fix: A Pre-Programmed 2008–2010 VUE Body Control Module

Forget expensive dealership visits and the hassle of finding a shop with the right programming tools. This Body Control Module is the definitive solution, arriving at your doorstep fully programmed to your vehicle’s specific VIN. We install the latest GM software updates, ensuring optimal performance and compatibility. It’s a true plug-and-play repair that gets your Vue back to factory-spec functionality without the dealership price tag.

Expert Pro Tip: Check for Water Intrusion

In my shop, the number one cause of BCM failure on these platforms is water damage. Before you install your new module, take five minutes to inspect the windshield seals, A-pillar trim, and the cowl area for any signs of leaks or moisture. A small leak can drip directly onto the BCM’s location in the center dash, causing corrosion and failure. Ensuring the area is dry can prevent you from having to do this job again down the road.

Why Choose Our VIN-Programmed BCM?

  • No Dealer Programming Needed: We handle all the programming before we ship. Just provide your VIN at checkout.
  • Fixes Common Electrical Faults: Resolves issues with power locks, windows, lighting, security system, and remote keyless entry.
  • Latest GM Software: Your module comes with the most current software, correcting known bugs and improving performance.
  • Direct-Fit Replacement: Guaranteed to match the function of your original module and plug directly into the factory harness.
  • Cost-Effective Solution: Save hundreds of dollars compared to sourcing, purchasing, and programming a module at a dealership.

Simple Installation Guide

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait 10 minutes for the systems to discharge.
  2. Locate the BCM: On the 2008-2010 Saturn Vue, the BCM is typically located in the center console area, often accessible by removing side panels or the glove box.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Unbolt or unclip the old module and remove it from the vehicle.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location. Reconnect all electrical connectors firmly until they click into place.
  5. Reconnect Battery: Reattach the negative battery terminal.

CRITICAL: Post-Installation Procedures

After installing your new 2008–2010 VUE Body Control Module, a few final steps are necessary to ensure all vehicle systems communicate correctly. These procedures require a professional-grade scan tool.

  • Airbag System Reset: The airbag warning light will likely be on. You must perform the “Setup SDM Primary Key in BCM” procedure to sync the new BCM with the airbag system and clear the light.
  • Brake Pedal Position Sensor Relearn: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated. This ensures the brake lights and stability control systems function correctly.

If you are not comfortable performing these steps, we strongly recommend seeking assistance from a qualified local technician.

Guaranteed Fitment & Part Number Compatibility

This module is a direct replacement for a wide range of GM part numbers. If your original module has any of the following numbers, this part is the correct fit for your vehicle:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Genuine OEM

Yes

Condition

Refurbished

MPN

25892622

Interchange part number

PartNumber

591

Model

VUE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top