Tired of Bizarre Electrical Problems in Your Saturn Vue?
If your 2008-2010 Saturn Vue is acting possessed—with flickering lights, power windows and locks that have a mind of their own, or a security light that won’t turn off—you’re likely dealing with a failing Body Control Module (BCM). As a technician with over two decades of experience, I’ve seen these modules cause some of the most frustrating and hard-to-diagnose issues. The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of problems that seem unrelated.
This isn’t just another part. This is a complete, ready-to-install solution. We take the guesswork and dealer expense out of the equation by pre-programming this 2008-2010 Vue Body Control Module to your vehicle’s specific VIN. Just provide us with your VIN at checkout, and we’ll flash the module with the latest GM software updates. This ensures seamless integration and restores your vehicle’s functions correctly the first time.
A Technician’s Notebook: The Haunted Saturn Vue
Just last month, a 2009 Saturn Vue was towed to my shop. The owner was at her wit’s end. The interior lights would randomly strobe while driving, the radio would shut off, and sometimes the key fob wouldn’t work at all. She had already replaced the battery and checked the fuses. My initial scan showed a slew of communication errors (U-codes) pointing to a network problem. After isolating the circuits, I traced the issue back to the BCM. It was failing internally, sending erratic signals across the CAN bus network. We replaced it with a VIN-programmed module like this one, and all the ghostly electrical problems vanished instantly. It’s a common failure point I’ve diagnosed hundreds of times on this GM platform.
Is Your Vehicle Showing These Symptoms?
- ✔ Erratic or non-working power windows, door locks, or mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ The anti-theft or security system light is on, preventing the car from starting.
- ✔ Instrument cluster gauges behaving erratically or going dark.
- ✔ Key fob not being recognized or functioning intermittently.
- ✔ Diagnostic trouble codes (DTCs) related to communication loss, such as U0140, U0155, or other U-codes.
A Straightforward Guide to Installation
Replacing the BCM in your Vue is a manageable job for a confident DIYer. The module is typically located behind the center dash console area.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait about 15 minutes to allow all systems to power down completely.
- Access the Module: Carefully remove the necessary dash trim panels to gain access to the BCM. On the Vue, this is usually in the center dash or console area.
- Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs, so be gentle. Then, unbolt the module from its mounting bracket.
- Install the New BCM: Mount your new, pre-programmed BCM in place and securely reconnect all the electrical connectors. Ensure they click into place.
- Reconnect Battery: Reassemble the dash trim, then reconnect the negative battery terminal.
- CRITICAL Final Steps: After installation, a few relearn procedures are necessary. You will need a capable diagnostic scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure to clear any airbag faults. Some vehicles may also require a Brake Pedal Position Sensor Calibration to ensure proper brake light and stability control function.
Verified Vehicle Compatibility
This BCM is a direct-fit replacement for 2008-2010 Saturn Vue models. It also interchanges with part number 25910474 and fits a wide variety of other GM vehicles. Please verify your original part number against our extensive cross-reference list below to ensure perfect fitment.
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
EXPRESS 3500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
IMPALA 06-12 Body Control (BCM); (LH dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
ACADIA 07-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
TAHOE 10 Body Control (BCM); (under steering column), ID 25892622
TRAVERSE 09-12 Body Control (BCM); (LH dash)
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 2500 VAN 11-12 Body Control (BCM); (center dash)
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 22860591
DTS 06-11 Body Control (BCM); (RH center dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 11-12 Body Control (BCM)
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
STS 10 Body Control (BCM); center dash
SAVANA 3500 VAN 08-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898
CTS 08-13 Body Control (BCM); LH dash
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921436
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
G8 08-09 Body Control (BCM); (center dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898
ESCALADE 10 Body Control (BCM); (under steering column), ID 25892622
LUCERNE 06-11 Body Control (BCM); (right side dash)
CTS 08 Body Control (BCM); RH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898
SRX 07-09 Body Control (BCM); LH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898
EXPRESS 3500 VAN 11-12 Body Control (BCM)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
SAVANA 3500 VAN 11-12 Body Control (BCM)
VUE 08-10 Body Control (BCM); (center dash)
CAPRICE 11-13 Body Control (BCM)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EXPRESS 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
This BCM is a direct replacement for the following part numbers:
10382479 15093910 15276271 15299986 15819552 15828601 15837419 15872388 15872421 15880684 15921352 15921353 15948438 15948439 20815898 20839063 20864767 20864768 20921435 20921436 20935349 22860591 25826124 25826125 25847588 25847589 25892622 25910474 25934762 25934763 95151084
Frequently Asked Questions
Why do I need to provide my VIN?
Your vehicle’s VIN is essential because it allows us to program the BCM with the exact software and settings for your specific options package. This ensures all features work correctly and the module communicates properly with other computers in your vehicle, making the installation process much simpler for you.
What exactly does a Body Control Module do?
The BCM acts as the central hub for your vehicle’s body-related electronics. It controls functions that aren’t related to the engine, such as power windows, locks, interior and exterior lighting, the alarm system, wipers, and instrument cluster warning lights.
Is this part difficult to install myself?
For someone with moderate mechanical skill, it is a manageable task. The main challenge is accessing the module behind the dash. Since we pre-program the unit, you eliminate the most difficult step, which is software flashing. However, you will need a scan tool for the final security and sensor relearn procedures.
What happens if I don’t do the airbag (SDM) or brake relearn procedures?
Failure to perform the ‘Setup SDM Primary Key’ procedure will result in a persistent airbag warning light on your dash, and the system may not function correctly. Skipping the brake pedal calibration could lead to issues with brake light operation or stability control performance. These steps are critical for safety.