Is Your Saturn VUE Acting Possessed?
If you’re dealing with a frustrating storm of electrical gremlins in your 2008-2010 Saturn VUE, you’re not alone. One day the power windows have a mind of their own, the next the security light is flashing and the key fob is useless. These aren’t random glitches; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s comfort and convenience features, and when it starts to go, it can make driving a nightmare.
Just last month, a 2009 Saturn Vue was towed to my shop. The owner was at his wit’s end – the interior lights wouldn’t turn off, draining the battery, and the car would only start intermittently. A quick diagnostic scan pointed directly to a communication failure with the BCM. After swapping it with one of our pre-programmed units, all the bizarre symptoms vanished instantly. It’s a common failure point on these platforms, and I’ve personally diagnosed and replaced hundreds over my 20+ years in the bay.
The Simple, Dealer-Free Solution
Forget expensive dealership diagnostics and programming fees. This is a direct-fit replacement 2008-2010 VUE Body Control Module that arrives at your door ready to install. We take the hassle out of the repair by programming the module to your vehicle’s specific VIN before we ship it. This ensures all your factory options work exactly as they should, right out of the box.
Common Symptoms of a Failing BCM:
- ✔ Erratic or non-working power windows, door locks, and mirrors.
- ✔ Interior dome lights staying on or not working at all.
- ✔ The security system light flashing, preventing the car from starting.
- ✔ Key fobs that suddenly stop working.
- ✔ Horn honking randomly or not working when pressed.
- ✔ Dashboard warning lights appearing for no reason.
Easy Installation & Post-Install Procedures
Replacing the BCM is a straightforward job for a confident DIYer. In the Saturn Vue, it’s typically located in the center dash console.
- Safety First: Always disconnect the negative battery terminal and wait 10-15 minutes before starting any work on vehicle electronics.
- Locate the Module: Access the BCM, which is usually behind the center console trim panels.
- Disconnect & Remove: Carefully unplug the electrical connectors. Press the release tabs firmly. Once disconnected, unbolt the old module and remove it.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical harnesses. Ensure they click into place.
- Reconnect Battery: Reattach the negative battery terminal.
Expert Pro Tip: Post-Installation Steps
After installing your new 2008-2010 VUE Body Control Module, two critical procedures are often required. This is not a defect, but a necessary security and safety handshake between modules. You will need a bi-directional scan tool to perform these functions:
- Airbag System (SRS): You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag module and will clear the airbag warning light from your dash.
- Brake System: Some vehicles require a ‘Brake Pedal Position Sensor Calibration’. This ensures the brake lights and stability control system receive accurate data from the pedal.
Skipping these steps can result in persistent warning lights and potential safety system issues. If you’re not equipped to perform these resets, a local independent shop can typically complete them for you quickly.
Guaranteed Compatibility
This module is a direct replacement for a wide range of original equipment part numbers. If your old BCM has any of the following numbers on it, this part is the correct fit for your vehicle:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Broad GM Vehicle Fitment
While this listing is focused on the 2008-2010 VUE Body Control Module, this versatile part also fits a huge range of other GM cars, trucks, and SUVs. Please verify your specific model and options below:
ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS (1500/2500/3500) 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS (1500/2500/3500) 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, YUKON 10, YUKON XL 1500 10. (Consult the detailed fitment list and match your part number for guaranteed compatibility).