Tired of Chasing Electrical Gremlins in Your Saturn VUE?
As a technician with over two decades of diagnostic experience, I’ve seen how a faulty Body Control Module (BCM) can turn a reliable vehicle into a source of constant frustration. Are you dealing with power windows that have a mind of their own, interior lights that flicker or won’t turn off, or a security system that randomly activates? Perhaps your instrument cluster is behaving erratically, or worse, your VUE sometimes refuses to start. These aren’t random issues; they’re classic symptoms of a failing BCM, the central command center for your vehicle’s body electronics.
Stop the guesswork and replace the root cause of the problem. This is a direct-replacement Body Control Module for your 2008-2010 Saturn VUE, a reliable solution to restore full functionality to your vehicle’s accessories and security systems. We take the hassle out of the repair by programming the module to your vehicle’s specific VIN before we ship it. This means no expensive trips to the dealership for programming—it arrives ready for a straightforward installation.
A Technician’s Notebook: The Case of the Haunted SUV
A customer brought in their 2009 Saturn VUE with a laundry list of bizarre electrical complaints: the radio would shut off, the dome light would stay on, and the door locks would cycle while driving. They had already replaced the battery and checked fuses with no luck. After connecting my scan tool, I found several communication loss codes (U-codes) pointing to a network issue. In my shop, I’ve seen this exact pattern dozens of times. We traced the issue back to the BCM, which was failing internally and disrupting the entire data bus. Installing a VIN-programmed 2008-2010 VUE Body Control Module resolved all issues in under an hour, saving the customer from further diagnostic headaches and costly, ineffective repairs.
Common Signs of a Failing BCM
If your vehicle is exhibiting these symptoms, a faulty BCM is the most likely culprit. A failing module can often generate communication-related Diagnostic Trouble Codes (DTCs) such as U0140, U0155, or U0164.
- ✔ Power windows, mirrors, or door locks operating intermittently or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not working.
- ✔ The anti-theft or security system light is on, or the alarm sounds for no reason.
- ✔ Erratic behavior from the instrument panel gauges or warning lights.
- ✔ The engine won’t crank or start despite having a good battery and starter.
- ✔ Key fobs are not recognized by the vehicle.
A Straightforward Guide to Installation
With our pre-programmed module, installation is simple for a DIYer with basic tools or a professional mechanic. The BCM on the VUE is typically located in the center dash area.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
- Access the Module: Carefully remove the necessary dash trim panels to gain access to the old BCM. It’s often secured with a few small bolts or clips.
- Swap the Connections: Note the orientation of the electrical connectors. Disconnect them from the old module and carefully plug them into your new, pre-programmed BCM.
- Secure the New BCM: Mount the new module in the same location as the original. Reassemble your dashboard trim.
- Reconnect and Test: Reconnect the negative battery terminal. Start the vehicle and test all body functions—windows, locks, lights, radio, etc.—to confirm the repair.
- Perform Relearns (If Needed): In some cases, post-install procedures like an Airbag System Sync or Brake Pedal Position relearn may be required. See the notes below for more details.
Verified Vehicle Compatibility
This BCM is a direct replacement for part number 25847589 and interchanges with a wide range of other GM part numbers. Please confirm your vehicle is on this list. This module is programmed specifically for your VIN, ensuring perfect compatibility.
This part will fit these makes and models with these options:
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
EXPRESS 3500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
IMPALA 06-12 Body Control (BCM); (LH dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
ACADIA 07-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
TAHOE 10 Body Control (BCM); (under steering column), ID 25892622
TRAVERSE 09-12 Body Control (BCM); (LH dash)
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 2500 VAN 11-12 Body Control (BCM); (center dash)
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 22860591
DTS 06-11 Body Control (BCM); (RH center dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 11-12 Body Control (BCM)
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
STS 10 Body Control (BCM); center dash
SAVANA 3500 VAN 08-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898
CTS 08-13 Body Control (BCM); LH dash
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921436
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
G8 08-09 Body Control (BCM); (center dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898
ESCALADE 10 Body Control (BCM); (under steering column), ID 25892622
LUCERNE 06-11 Body Control (BCM); (right side dash)
CTS 08 Body Control (BCM); RH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898
SRX 07-09 Body Control (BCM); LH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898
EXPRESS 3500 VAN 11-12 Body Control (BCM)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
SAVANA 3500 VAN 11-12 Body Control (BCM)
VUE 08-10 Body Control (BCM); (center dash)
CAPRICE 11-13 Body Control (BCM)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EXPRESS 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
This BCM is also a compatible replacement for the following part numbers:
10382479 15093910 15276271 15299986 15819552 15828601 15837419 15872388 15872421 15880684 15921352 15921353 15948438 15948439 20815898 20839063 20864767 20864768 20921435 20921436 20935349 22860591 25826124 25826125 25847588 25847589 25892622 25910474 25934762 25934763 95151084
Frequently Asked Questions
How does the VIN programming process work?
After you place your order, you will need to provide us with your vehicle’s 17-digit VIN. We use this information to load the latest GM-approved software that is specific to your car’s features and options. This ensures the module works correctly right out of the box.
Do I need to send my original BCM to you?
For this VIN programming service, you do not need to send your original module to us. We program a replacement unit and ship it to you. If you select our Cloning Service instead, you would send your original module for data transfer. With either service, your original module is always returned to you.
What is an Airbag System Sync?
The BCM and the airbag system (SDM) communicate for safety. If the airbag light is on after installation, it means they need to be re-synchronized. This is done with a professional scan tool using the ‘Setup SDM Primary Key in BCM’ function. It’s not always required, but it’s a possibility.
Will I need any other special tools or procedures?
Besides the potential airbag sync, some models may require a Brake Pedal Position relearn procedure to ensure brake lights and traction control work correctly. These procedures require a compatible high-end scan tool. Always consult a service manual for your specific vehicle’s requirements.