Programmed 2008-2010 VUE Body Control Module 25847588

Restore Your VUE’s Electrical System

Tired of strange electrical issues in your Saturn VUE? This Body Control Module (BCM) is the solution. It comes fully programmed to your vehicle’s VIN, eliminating the need for expensive dealership tools. Fix your power windows, lights, and starting problems today. Get your VIN-programmed BCM and fix it right the first time!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1047 Categories: ,
Guaranteed Safe Checkout

Restore Full Electrical Function to Your Saturn VUE

Are you battling frustrating and unpredictable electrical problems in your 2008-2010 Saturn VUE? Issues like flickering lights, malfunctioning power windows, a dead instrument cluster, or even a no-start condition can often be traced back to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics. When it fails, it can create a cascade of confusing and seemingly unrelated symptoms. This isn’t just an inconvenience; it can be a serious safety concern. We offer a reliable, direct-fit solution with this professionally programmed BCM, designed to get your VUE back to factory-spec performance without the exorbitant dealership costs.

From the Diagnostic Bay

A customer’s 2009 Saturn VUE came into the shop last week with a laundry list of bizarre issues. The radio would turn on and off by itself, the dome light wouldn’t work, and occasionally, the key fob would be completely unresponsive. They had already replaced the battery and checked all the fuses. After connecting my scan tool, I noticed several communication error codes pointing towards the BCM. These intermittent problems are classic signs of internal BCM failure, often due to failing solder joints or corrupted software. Installing a VIN-programmed 2008-2010 VUE Body Control Module like this one resolved all the issues instantly. It’s a common failure point, and this is the definitive fix.

Is Your Saturn VUE Showing These Symptoms?

  • ✔ Erratic or non-working power windows, door locks, or interior lights.
  • ✔ The security or anti-theft system light stays on, preventing the engine from starting.
  • ✔ Instrument panel gauges behaving strangely or not working at all.
  • ✔ Key fob functions (lock/unlock) are intermittent or have failed completely.
  • ✔ Unexplained battery drain that leaves you with a dead battery overnight.
  • ✔ Diagnostic trouble codes (DTCs) related to communication loss with other modules.

The Smart Solution: Pre-Programmed for Your Vehicle

Replacing a BCM isn’t just a simple swap. A new module from the dealer requires expensive, specialized tools to program it to your vehicle’s specific VIN and options. Our service eliminates that barrier. We take care of the complex part for you. Simply provide us with your vehicle’s VIN during checkout, and our technicians will flash this 2008-2010 VUE Body Control Module with the latest, most stable GM software updates specific to your car. This ensures it works seamlessly with your existing keys, security system, and all factory-installed features right out of the box.

A Straightforward Guide to BCM Installation

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes to allow all modules to power down completely.
  2. Locate the BCM: On the 2008-2010 Saturn VUE, the Body Control Module is typically located in the center dash area, often accessible by removing the glove box or a lower dash panel.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old module from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely plug in all the electrical connectors. You should hear a ‘click’ as they lock into place.
  5. Reconnect Power: Reconnect the negative battery terminal and tighten it securely.
  6. Final Procedures (Crucial): After installation, a few final steps are required. You must perform the ‘Setup SDM Primary Key in BCM’ procedure with a capable scan tool to clear any airbag lights. Additionally, some vehicles may need a brake pedal position sensor recalibration. If you are not equipped to perform these steps, a professional mechanic can complete them quickly.

Verified Vehicle Compatibility

This BCM is a direct replacement for a wide range of GM vehicles. While this listing is specifically for the 2008-2010 VUE Body Control Module, it also fits the following models. Always verify your part number or consult with us if you are unsure.

ACADIA 07-12 | AVALANCHE 1500 10 | CAPRICE 11-13 | CAPTIVA SPORT 12 | CTS 08-13 | DTS 06-11 | ENCLAVE 08-12 | EQUINOX 07-09 | ESCALADE 10 | ESCALADE ESV 10 | ESCALADE EXT 10 | EXPRESS 1500/2500/3500 VAN 08-12 | G8 08-09 | HUMMER H2 08-09 | IMPALA 06-13 | LUCERNE 06-11 | MONTE CARLO 06-07 | OUTLOOK 07-10 | SAVANA 1500/2500/3500 VAN 08-12 | SRX 07-09 | STS 10 | SUBURBAN 1500 10 | TAHOE 10 | TORRENT 07-09 | TRAVERSE 09-12 | VUE 08-10 | YUKON 10 | YUKON XL 1500 10

Replaces Part Numbers:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Frequently Asked Questions

Do I need to do any programming after I receive this BCM?

No. We program the module to your vehicle’s VIN before shipping. It arrives ready for installation. However, you will need to perform a security relearn procedure and potentially other minor relearns (like airbag key setup) with a scan tool after it’s installed.

Will this fix my car’s no-start problem?

If the no-start issue is caused by the BCM losing communication with the key or the anti-theft system being constantly active, then yes, this part will likely solve the problem. A proper diagnosis is always recommended.

What information do you need from me?

After you complete your purchase, you must provide us with your 17-digit Vehicle Identification Number (VIN). This is essential for us to program the module correctly for your specific vehicle options.

Is this a difficult part for a DIYer to replace?

The physical replacement is straightforward for someone with basic mechanical skills. It involves removing a few dash panels and unplugging connectors. The most critical part is performing the post-installation relearn procedures, which may require a bi-directional scan tool.

What happens if I don’t do the airbag (SDM) key setup?

If the ‘Setup SDM Primary Key in BCM’ procedure is not performed, the airbag warning light on your dashboard will remain illuminated, and the supplemental restraint system may not function correctly in an accident. This is a critical safety step.

Genuine OEM

Yes

Condition

Refurbished

MPN

25847588

Interchange part number

PartNumber

591

Model

VUE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top