2008-2010 Vue Body Control Module 15948439 Cloning Service

If your 2008-2010 Saturn Vue is suddenly acting haunted—with flickering dashboard lights, power windows and locks with a mind of their own, or a frustrating no-start condition—the Body Control Module (BCM) is the most likely culprit. As a technician with over two decades of experience, I’ve seen these exact symptoms hundreds of times. The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of confusing and intermittent problems.

Don’t let a faulty module keep you off the road or force you into an expensive and time-consuming visit to the dealership. We offer a straightforward, reliable solution. This is a replacement BCM that is prepared specifically for your vehicle through our professional cloning service. This means we transfer all the critical data from your original module—including security information, key fob programming, and vehicle-specific options—to this replacement unit. The result is a part that is truly plug-and-play, eliminating the need for costly on-car programming.

Key Signs of a Failing BCM

A failing Body Control Module can manifest in various ways. If you’re noticing any of the following, it’s a strong indicator that your BCM needs attention:

• ✔ Erratic or non-functional power windows, door locks, or interior/exterior lights.
• ✔ The security or anti-theft system light stays on, preventing the engine from starting.
• ✔ Gauges on the instrument cluster behaving erratically or not working at all.
• ✔ The horn sounding unexpectedly or the panic alarm triggering randomly.
• ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140 (Lost Communication With Body Control Module).
• ✔ Key fobs that suddenly stop working, even with a new battery.

Your Straightforward BCM Installation Guide

Installing your cloned BCM is a manageable job for a DIYer with basic tools. For the 2008-2010 Vue, the BCM is typically located in the center dash area.

1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
2. Access the Module: You will need to remove trim panels around the center console and radio to gain access to the BCM. It’s often mounted to a bracket behind other components.
3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
4. Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
5. Post-Installation Checks: Reconnect the battery terminal. Start the vehicle and test all body functions: lights, locks, windows, radio, and wipers. Note the post-install procedures below, as some relearns may be necessary.

Important Note on Post-Installation Procedures: While our cloning service handles the main programming, some vehicle systems may require a recalibration after the BCM is replaced. A Brake Pedal Position Relearn or an Airbag System Sync (if the SRS light is on) may need to be performed with a capable scan tool. Always consult a service manual for your specific vehicle’s requirements.

Verified Vehicle Compatibility

This module is a direct fit for the specified models and is interchangeable with a wide range of part numbers, ensuring broad compatibility. Please verify your part number against the list below.