Restore Full Electrical Control to Your GM Vehicle
If you’re dealing with bizarre electrical issues in your 2008-2010 Saturn VUE or another compatible GM vehicle, a failing Body Control Module (BCM) is often the culprit. As a technician with over two decades of experience, I’ve seen firsthand how a faulty BCM can turn a reliable vehicle into a source of constant frustration. It acts as the central hub for your car’s body electronics, managing everything from your power windows and locks to your interior lighting and security system. When it fails, chaos ensues.
This isn’t just a replacement part; it’s a complete solution. We provide a top-quality BCM that comes fully programmed to your vehicle’s specific VIN. This means you can skip the expensive trip to the dealership for programming. Simply provide us with your VIN after purchase, and our experts will flash the module with the latest GM software updates, ensuring it’s ready for installation right out of the box. This service restores the original functionality and reliability you depend on, getting you back on the road safely and quickly.
From the Diagnostic Bay
I remember a 2009 Saturn VUE that came into my shop last fall. The owner was at her wit’s end. The radio would cut out, the dome light would flicker, and the power locks worked only when they felt like it. A quick scan revealed a handful of U-codes, specifically a U0140 for ‘Lost Communication With Body Control Module’. This pointed directly to a failing BCM. Instead of a multi-day, high-cost repair at the dealer, we ordered a pre-programmed module like this one. The installation was straightforward, and once the new 2008-2010 VUE Body Control Module was in, all the strange electrical gremlins vanished. The customer was thrilled to have her car back to normal without the dealership hassle and expense.
Is Your Vehicle Showing These Symptoms?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, this module is likely the solution you need:
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ The security system acting up or preventing the car from starting.
- ✔ Intermittent operation of the radio or climate controls.
- ✔ False warning lights on the dashboard (e.g., airbag, ABS).
- ✔ Diagnostic Trouble Codes (DTCs) such as U0140, B1001, or other communication errors related to the BCM.
A Straightforward Guide to Your BCM Installation
Installing your new 2008-2010 VUE Body Control Module is a manageable job for a confident DIYer or any professional mechanic. For the Saturn VUE, it’s typically located in the center dash console.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the BCM: On the 2008-2010 VUE, the BCM is found in the center dash area. You may need to remove some trim panels to gain access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in place of the old one. Reconnect all electrical connectors securely.
- Reconnect Battery: Reattach the negative battery terminal.
- Perform Final Checks: Start the vehicle and test all related functions: lights, locks, windows, radio, etc. Note the post-installation procedures below, as some may be required.
Important Post-Installation Steps
After installation, your vehicle might require one or more of the following procedures to ensure all systems communicate correctly. These typically require a professional-grade scan tool.
- Airbag System Sync: If the airbag light is on, a ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the systems.
- Brake Pedal Position Relearn: A recalibration may be needed for proper brake light and traction control operation.
Disclaimer: Procedures can vary. Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Verified Fitment Across a Wide Range of GM Vehicles
This module is a direct replacement for multiple part numbers and fits a broad array of GM cars, trucks, and vans. Please verify your part number and vehicle model from the list below to ensure compatibility. This unit replaces part numbers including: 15921352, 10382479, 15093910, 15276271, 15819552, 20815898, 22860591, 25892622, and more.
AVALANCHE 1500 10
CAPRICE 11-13
CAPTIVA SPORT 12
CTS 08-13
DTS 06-11
ENCLAVE 08-12
EQUINOX 07-09
ESCALADE 10
ESCALADE ESV 10
ESCALADE EXT 10
EXPRESS 1500 VAN 08-12
EXPRESS 2500 VAN 08-12
EXPRESS 3500 VAN 08-12
G8 08-09
HUMMER H2 08-09
IMPALA 06-13
LUCERNE 06-11
MONTE CARLO 06-07
OUTLOOK 07-10
SAVANA 1500 VAN 08-12
SAVANA 2500 VAN 08-12
SAVANA 3500 VAN 08-12
SRX 07-09
STS 10
SUBURBAN 1500 10
TAHOE 10
TORRENT 07-09
TRAVERSE 09-12
VUE 08-10
YUKON 10
YUKON XL 1500 10
Frequently Asked Questions
Frequently Asked Questions
2008-2010 VUE Body Control Module
Is this the correct for my car?
This module fits 2008-2010 Saturn VUE models and many other GM vehicles. The best way to confirm is to match the part number from your original BCM to one of the many compatible numbers listed in our description.