2008-2010 VUE Body Control Module 15276271 | Cloning Service Included

End Your VUE’s Electrical Nightmares

Tired of random warning lights and failing electronics in your Saturn VUE? This Body Control Module (BCM) is the solution. With our expert cloning service, we transfer your vehicle’s original data to this replacement part, making it a true plug-and-play fix. Skip the expensive dealership programming and restore your car’s functions perfectly. Get the permanent fix for your vehicle today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-397 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM

Are you chasing electrical gremlins in your 2008-2010 Saturn VUE? Flickering lights, malfunctioning power windows or locks, and strange warning messages on the dash are classic signs of a failing Body Control Module (BCM). As the central command for your vehicle’s body electronics, a faulty BCM can cause a cascade of frustrating and unpredictable problems. This isn’t just an inconvenience; it can affect vehicle security and safety systems. This replacement BCM, part number 15276271, is the reliable, cost-effective solution you’ve been searching for.

A Technician’s Notebook: The Ghost in the Machine

I remember a 2009 Saturn VUE that came into the shop with a laundry list of bizarre issues. The owner said the radio would turn on by itself, the dome light wouldn’t turn off, and the anti-theft system would randomly engage, preventing the car from starting. A scan tool showed a dozen communication error codes (U-codes) pointing to the BCM. After confirming power and grounds were good, we knew the module itself was the culprit. Instead of a costly trip to the dealer for a new module and programming, we used a cloning service like this one. We sent in the original BCM, had the data transferred to a replacement unit, and installed it. The vehicle was back to normal in a day, saving the customer hundreds in dealership fees and diagnostic time. This is the exact service we offer you.

The Power of Our Cloning Service

Forget about towing your vehicle to a dealership and paying for expensive programming. Our professional cloning service makes this repair straightforward. Here’s how it works: after you place your order, you’ll send us your vehicle’s original BCM. Our technicians will then extract the critical vehicle-specific data—including key information, security settings, and option configurations—and flash it directly onto this replacement module. We then ship both your original module and the ready-to-install replacement back to you. The result is a true plug-and-play part, specifically configured for your 2008-2010 VUE Body Control Module, that restores full functionality right out of the box.

Common Signs of a Failing BCM

  • ✔ Erratic or non-functional power windows, door locks, and interior/exterior lights.
  • ✔ The security or anti-theft system light stays on, or the vehicle won’t start intermittently.
  • ✔ Dashboard warning lights (like ABS or Airbag) illuminate for no reason.
  • ✔ The radio or climate control system behaves unpredictably.
  • ✔ Communication-related Diagnostic Trouble Codes (DTCs) are stored, such as U0140, U0155, or other U-series codes.
  • ✔ Horn honking unexpectedly or not working at all.

Your Straightforward BCM Installation Guide

  1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
  2. ✔ Locate the BCM: On the 2008-2010 Saturn VUE, the Body Control Module is typically located in the center dash area, often accessible by removing the glove box or a lower dash panel.
  3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket and remove it from the vehicle.
  4. ✔ Install the New Module: Mount your new, pre-programmed BCM in the exact location of the old one. Reconnect all electrical connectors securely.
  5. ✔ Final Steps: Reconnect the negative battery terminal. Start the vehicle to confirm that the electrical issues are resolved. Please see the post-installation notes below.

Important Post-Installation Procedures

While our cloning service makes this a nearly plug-and-play repair, some GM vehicles may require additional steps to ensure all systems communicate correctly. These procedures typically require a professional-grade scan tool.

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed to sync the airbag system with the new BCM.
  • Brake Pedal Position Relearn: In some cases, a brake pedal position sensor recalibration may be necessary for proper brake light and traction control operation.

Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.

Verified Vehicle Compatibility

This module is a direct replacement for part number 15276271 and is compatible with a wide range of GM vehicles. It also interchanges with the following part numbers: 10382479, 15093910, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

ACADIA 07-12 Body Control (BCM); (LH dash)
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, or 22860591
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS/SAVANA VANS 08-12
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-13 Body Control (BCM); (LH dash)
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622

Frequently Asked Questions

Frequently Asked Questions

What exactly is a BCM cloning service?

Our cloning service is a process where we transfer the exact software and vehicle-specific configuration data (like VIN, mileage, and key information) from your original, failing BCM to this replacement unit. This makes the new module plug-and-play, avoiding the need for dealer programming.

So, I don’t need to take my car to the dealer after installing this?

Correct. Because we clone your original module’s data, the replacement BCM is already programmed for your specific vehicle. In most cases, no further programming is required, saving you significant time and money.

Where is the BCM located on my 2009 Saturn VUE?

On the 2008-2010 Saturn VUE, the Body Control Module is typically found behind the glove box or within the center dash console area.

What if my airbag light is on after installation?

This can happen occasionally. It means the new BCM needs to be electronically ‘introduced’ to the airbag system’s computer (SDM). A professional mechanic with a capable scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.

Why do you need my original BCM?

Your original module contains the unique data that makes your car’s features work correctly. We need it to perform the cloning service. We always return your original module along with the newly programmed replacement.

Genuine OEM
Condition
MPN

15276271

Interchange part number
PartNumber
Model

VUE

Year
Brand
Manufacturer Part Number
Scroll to Top