Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM
Are you dealing with bizarre electrical problems in your vehicle? Flickering dash lights, power windows with a mind of their own, or a security system that prevents your car from starting can all point to one culprit: a failing Body Control Module (BCM). As the central command for your vehicle’s comfort and security features, a faulty BCM can make driving a frustrating experience. This isn’t just an inconvenience; it can affect vehicle safety and security. We offer a dependable solution with this replacement BCM, complete with a professional cloning service that makes installation a breeze.
Forget about expensive dealership visits and the hassle of programming. With our unique Cloning Service, we transfer the essential data from your original BCM to this replacement unit before it even ships. This ensures that when you receive your part, it’s ready to install right out of the box, syncing perfectly with your vehicle’s existing systems and keys. This is the most efficient way to get a reliable fix for your 2008-2010 Vue BCM and many other compatible GM vehicles.
A Technician’s Notebook
Just last month, a 2009 Saturn Outlook was towed into my bay. The customer was at their wit’s end—the horn would blare randomly, the interior lights wouldn’t turn off, and the remote keyless entry was dead. A quick scan showed a flurry of communication error codes (U-codes) pointing to the BCM. Instead of a costly new module and hours of programming at the dealer, we used our cloning service. We transferred the data from his failing BCM to a quality replacement. The install took less than an hour, and all the electrical gremlins were gone. The customer drove away with a fixed vehicle for a fraction of the dealership’s quote.
Is Your Vehicle Showing These Signs of BCM Failure?
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights that stay on, flicker, or don’t work at all.
- ✔ The security or anti-theft system light is on, causing a no-start condition.
- ✔ The horn honking unexpectedly or the alarm going off randomly.
- ✔ Communication error codes, such as U0140, stored in the system.
- ✔ Wipers, radio, or climate controls behaving unpredictably.
Your Straightforward BCM Installation Guide
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the BCM: On the 2008-2010 Saturn Vue, the BCM is typically located in the center dash area. For other models, its location may vary (e.g., under the steering column or behind the LH dash panel). Refer to your service manual for the exact position.
- Remove Trim Panels: Carefully remove any plastic trim or panels necessary to access the BCM. Use a trim removal tool to avoid scratching or breaking clips.
- Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket and remove it.
- Install the New BCM: Mount the new, pre-programmed BCM in the same location. Reconnect all electrical connectors, ensuring they click securely into place.
- Reassemble and Test: Reinstall any trim panels you removed. Reconnect the negative battery terminal. Turn the key to the ‘ON’ position and test all body functions—windows, locks, lights, wipers, etc.—to confirm the repair.
- Perform Relearns (If Needed): In some cases, you may need to perform additional procedures. If the airbag light is on, an ‘Airbag System Sync’ is required. A ‘Brake Pedal Position Relearn’ may also be necessary for proper brake light and traction control operation. These procedures typically require a professional scan tool.
Verified Vehicle Compatibility
This BCM is a direct replacement for part number 95151084 and is compatible with a wide array of GM vehicles. It interchanges with the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, and 25934763. Please verify your vehicle from the list below:
- Acadia (2007-2012)
- Avalanche 1500 (2010)
- Caprice (2011-2013)
- Captiva Sport (2012)
- CTS (2008-2013)
- DTS (2006-2011)
- Enclave (2008-2012)
- Equinox (2007-2009)
- Escalade / ESV / EXT (2010)
- Express Van 1500/2500/3500 (2008-2012)
- G8 (2008-2009)
- Hummer H2 (2008-2009)
- Impala (2006-2013)
- Lucerne (2006-2011)
- Monte Carlo (2006-2007)
- Outlook (2007-2010)
- Savana Van 1500/2500/3500 (2008-2012)
- SRX (2007-2009)
- STS (2010)
- Suburban 1500 (2010)
- Tahoe (2010)
- Torrent (2007-2009)
- Traverse (2009-2012)
- Vue (2008-2010)
- Yukon / Yukon XL 1500 (2010)
Frequently Asked Questions
What is a cloning service?
Cloning is the process where we transfer the specific vehicle data—including VIN, key information, and software settings—from your original BCM to the replacement unit. This makes the new module plug-and-play, eliminating the need for dealership programming.
Do I need to send my original BCM to you?
Yes, for the cloning service to be performed, you will need to ship your original BCM to us after you place your order. We will perform the service and ship both your original module and the ready-to-install replacement back to you.
Will this fix my no-start problem?
If your no-start issue is caused by the BCM’s control over the anti-theft or security system (a common failure), then yes, this cloned module should resolve the problem.
What tools do I need for installation?
Basic hand tools like a socket set and a screwdriver are usually sufficient for removal and installation. A plastic trim removal tool is highly recommended to avoid damaging your dashboard panels.
What happens if my airbag light comes on after installation?
This can happen occasionally. It means the BCM and the airbag module (SDM) need to be electronically re-synced. This requires a professional scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure. Any competent repair shop can perform this for you.
Is this part difficult to install for a DIYer?
For someone with basic mechanical aptitude, the physical swap is straightforward. The main challenge with BCM replacement is typically the programming, which our cloning service completely handles for you, making this a very DIY-friendly repair.