Restore Your Saturn VUE’s Electrical System and Drive with Confidence
Are you dealing with frustrating and unpredictable electrical problems in your 2008-2010 Saturn VUE? Flickering lights, power windows with a mind of their own, or a security system that prevents your car from starting are all classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it falters, it can cause a cascade of baffling issues. Driving with a faulty BCM isn’t just an annoyance; it can compromise your vehicle’s safety and reliability.
Instead of facing expensive diagnostic fees and programming charges at a dealership, we offer a straightforward and effective solution. This is a replacement Body Control Module, compatible with part number 15828601, that comes with our professional cloning service. This means we transfer the exact data from your original BCM to this replacement unit. The result? A true plug-and-play module that is ready for installation right out of the box, restoring your vehicle’s functions without any additional programming.
Case Study: A Tricky Diagnosis
I remember a 2009 Saturn VUE that came into my shop with the strangest collection of symptoms. The owner reported that the radio would turn off randomly, the driver-side window wouldn’t go down, and the horn would occasionally chirp when using the turn signal. They had already replaced the battery and checked all the fuses. A scan showed a handful of communication codes (U-codes) pointing to a network issue. After confirming power and ground at the BCM connector, it was clear the module itself was the culprit. We performed a cloning service onto a replacement 2008-2010 VUE BCM, and upon installation, every single phantom issue was gone. It’s a perfect example of how one failing module can create system-wide chaos.
Is Your Vehicle Showing These Symptoms?
- ✔ Erratic or non-functional power windows, door locks, or interior lights.
- ✔ The security or anti-theft system light is on, preventing the engine from starting.
- ✔ The horn, windshield wipers, or other accessories work intermittently or not at all.
- ✔ Multiple unrelated warning lights are illuminated on the dashboard.
- ✔ Diagnostic trouble codes (DTCs) related to communication loss, such as U0140, are present.
- ✔ Inconsistent instrument panel gauge operation.
A Straightforward Guide to BCM Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes to allow all systems to power down completely.
- ✔ Locate the BCM: On the 2008-2010 Saturn VUE, the Body Control Module is typically located in the center dash area, often accessible by removing the glove box or a lower dash panel.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket and remove it from the vehicle.
- ✔ Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all the electrical connectors. You should hear a click as they lock into place.
- ✔ Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position (without starting the engine) and test all body functions—windows, locks, lights, wipers, etc.—to confirm proper operation.
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair, some GM vehicles require a simple relearn procedure to sync all systems. Please be aware of the following:
- Airbag System Sync: If your airbag warning light is on after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a compatible scan tool. This syncs the BCM with the airbag module.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure correct brake light and traction control functionality.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified mechanic for your specific model.
Guaranteed Fitment for Your Vehicle
This BCM is a direct replacement for part number 15828601 and a wide range of other interchangeable part numbers. It is compatible with the following vehicles, but please verify your part number before ordering:
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
EXPRESS 3500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
IMPALA 06-12 Body Control (BCM); (LH dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
ACADIA 07-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
TAHOE 10 Body Control (BCM); (under steering column), ID 25892622
TRAVERSE 09-12 Body Control (BCM); (LH dash)
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 2500 VAN 11-12 Body Control (BCM); (center dash)
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 22860591
DTS 06-11 Body Control (BCM); (RH center dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 11-12 Body Control (BCM)
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
STS 10 Body Control (BCM); center dash
SAVANA 3500 VAN 08-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898
CTS 08-13 Body Control (BCM); LH dash
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921436
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
G8 08-09 Body Control (BCM); (center dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898
ESCALADE 10 Body Control (BCM); (under steering column), ID 25892622
LUCERNE 06-11 Body Control (BCM); (right side dash)
CTS 08 Body Control (BCM); RH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898
SRX 07-09 Body Control (BCM); LH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898
EXPRESS 3500 VAN 11-12 Body Control (BCM)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
SAVANA 3500 VAN 11-12 Body Control (BCM)
VUE 08-10 Body Control (BCM); (center dash)
CAPRICE 11-13 Body Control (BCM)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EXPRESS 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
How does the cloning service work?
How does the cloning service work?
After you place your order, you will ship your original BCM to us. Our technicians will extract the vehicle-specific data (including key information and security settings) and transfer it directly to the replacement module. This makes the new unit a perfect electronic match for your vehicle.
Do I need to provide my VIN?
No, because we are cloning your original module, the VIN is already part of the data we transfer. We only need your original BCM to complete the service.
Is this a simple plug-and-play installation?
Yes, for 99% of installations. Because the module is cloned with your vehicle’s original data, no further programming is required. You simply install it, and it’s ready to go. In rare cases, a minor relearn procedure might be necessary as outlined in our post-installation notes.
What do I do with my old BCM?
Your original module is required for the cloning process. Once the service is complete, we always return your original BCM to you along with the newly programmed replacement unit. We do not keep your old part.
What if my airbag light comes on after I install it?
This is a known possibility with some GM vehicles. It simply means the new BCM needs to be electronically introduced to the airbag system. A qualified technician with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this and turn off the light.