Is Your Saturn Vue Experiencing Strange Electrical Problems?
If your 2008-2010 Saturn Vue is plagued by baffling electrical issues like flickering lights, malfunctioning power windows, or a security system that has a mind of its own, a failing Body Control Module (BCM) is the most likely cause. The BCM acts as the central command center for your vehicle’s body electronics. When it fails, it can create a cascade of frustrating and seemingly unrelated problems. This replacement module is the definitive solution to restore your vehicle’s functionality and peace of mind.
From the Diagnostic Bay
We had a 2009 Saturn Vue come in that was driving the owner crazy. The radio would turn off randomly, the driver’s side window wouldn’t go down, and the anti-theft light would flash, preventing the car from starting on occasion. The owner had replaced the battery and checked fuses, but the intermittent nature of the problems made it a nightmare to diagnose. After connecting our scan tool, we saw multiple communication errors pointing back to one source: the BCM. By replacing the faulty unit with a VIN-programmed module like this one, we resolved all the issues in a single repair, saving the customer from endless diagnostic fees and guesswork.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ Instrument cluster gauges behaving erratically or going dead.
- ✔ Keyless entry remote failing to lock or unlock the doors.
- ✔ Vehicle security system faults or the engine refusing to start.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Wipers activating on their own or not responding to the switch.
A Simple, Programmed Solution for Your 2008-2010 Vue Body Control Module
Don’t let a faulty BCM keep you off the road. This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the hassle out of the repair by pre-programming the module to your vehicle’s specific VIN. This ensures perfect compatibility with your vehicle’s options and systems, eliminating the need for an expensive trip to the dealership for programming. We flash it with the latest GM software updates, so you’re getting a module that performs better than the original.
Important Post-Installation Steps
After installing your new BCM, some additional steps, known as relearn procedures, may be necessary to ensure all systems communicate correctly. While not always required, being aware of them is key to a smooth repair.
- Airbag System Sync: If your airbag warning light is illuminated after installation, a professional scan tool must be used to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor recalibration might be needed.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Guaranteed Fitment
This BCM is a direct replacement for a wide range of GM vehicles. Please verify that your original module’s part number is on this list to ensure compatibility. This module replaces the following part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No. We handle the programming for you before we ship the part. Simply provide us with your vehicle’s VIN during or after checkout, and it will arrive ready for installation.
Where is the BCM located on a 2008-2010 Saturn Vue?
On the Saturn Vue, the Body Control Module is typically located in the center dash area, often behind or near the radio or climate controls. You may need to remove some dash panels to access it.
What happens if I install it without doing the relearn procedures?
If required for your vehicle, skipping the relearn procedures can result in persistent warning lights (like the airbag light) or improperly functioning systems (like brake lights or traction control). It’s best to perform them for full functionality.
Is this a new or used part?
This is a high-quality, inspected, and tested recycled OEM part, which is then programmed with the latest software for your specific vehicle. It offers OEM performance without the high dealer price.
Do I need to send my old BCM back?
No, there is no core charge for this part. You can keep your original module.