2008-2009 HUMMER H2 BCM 25934762 | Cloning Service Included

End Your H2’s Electrical Nightmares

Solve frustrating issues like flickering lights, dead power accessories, and no-start conditions with this Body Control Module for your 2008-2009 HUMMER H2. Our expert cloning service pre-programs the module to your vehicle’s VIN before shipping, so it arrives ready to install. Skip the expensive dealership visit and get a reliable, plug-and-play fix. Restore your HUMMER’s functionality and peace of mind—order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1149 Categories: ,
Guaranteed Safe Checkout

Restore Command of Your HUMMER H2’s Electronics

Is your 2008-2009 HUMMER H2 acting possessed? Flickering dash lights, power windows with a mind of their own, or a security system that randomly immobilizes your vehicle are classic signs of a failing Body Control Module (BCM). As the central hub for your truck’s comfort and convenience features, a faulty BCM can turn your daily drive into a frustrating guessing game. In my 20+ years as a technician, I’ve seen how a failing BCM can mimic a dozen other problems, leading to wasted time and money on incorrect diagnoses. This isn’t just an inconvenience; it’s a breakdown of your vehicle’s core electrical nervous system.

We offer a straightforward, reliable solution. This Body Control Module is not just a part; it’s a complete fix. The most significant hurdle in replacing a BCM is the need for expensive, dealer-level programming. We eliminate that step entirely with our professional Cloning Service. Simply provide your vehicle’s VIN after purchase, and our experts will transfer all the critical data from your original BCM to this replacement unit. It arrives at your door ready for installation, saving you a trip to the dealership and hundreds of dollars in programming fees.

Case Study: A Tricky Diagnosis

A customer brought in a 2009 H2 with a ghost problem: the radio would cut out, and the interior dome lights would flicker, but only on bumpy roads. They’d already replaced the battery and checked the alternator. We scanned for codes and found a series of U-codes (communication errors) pointing to the BCM. After a visual inspection, we found no loose connections. The issue was internal to the original BCM—micro-fractures on the circuit board were causing intermittent connection loss. Installing a pre-programmed 2008-2009 HUMMER H2 BCM like this one was the definitive fix. The cloning service ensured the security and key fob data transferred seamlessly, making it a one-and-done repair.

Is Your HUMMER Showing These Symptoms?

A failing BCM can cause a wide range of issues. If you’re experiencing any of the following, this module is the likely solution:

  • ✔ Erratic or non-functional power windows, door locks, or mirrors.
  • ✔ Interior or exterior lights that stay on, flicker, or won’t turn on at all.
  • ✔ The security or anti-theft system preventing the vehicle from starting.
  • ✔ False warnings on the instrument cluster (e.g., ‘Service 4WD’ light).
  • ✔ Communication error codes, such as U0140, U0155, or other U-series DTCs.
  • ✔ Unresponsive key fob commands.

A Straightforward Guide to Installation

With our cloning service, the physical swap is a simple process for a DIYer or any professional mechanic. For the 2008-2009 HUMMER H2, the BCM is located on the left-hand (driver’s side) firewall.

  1. Step 1: Safety First. Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
  2. Step 2: Locate the BCM. On your H2, you’ll find the BCM mounted to the firewall, typically accessible from inside the cabin under the dashboard on the driver’s side.
  3. Step 3: Disconnect and Remove. Carefully unplug the electrical connectors. Note their orientation. Then, unbolt the module from its mounting bracket.
  4. Step 4: Install the New Module. Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical harnesses.
  5. Step 5: Reconnect and Test. Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—lights, locks, windows, etc.—to confirm the repair.

Important Post-Installation Steps

While our cloning service handles the main programming, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This is only necessary if the light appears.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure correct brake light operation and to satisfy the traction control system.

Disclaimer: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance tailored to your exact vehicle.

Guaranteed Vehicle Compatibility

This module is a direct replacement for part number 25934762 and is interchangeable with a wide range of other GM part numbers. It is guaranteed to fit the following models:

HUMMER H2 08-09 Body Control (BCM); (LH firewall)
ACADIA 07-12 Body Control (BCM); (LH dash)
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, or 22860591
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE / ESV / EXT 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
EXPRESS / SAVANA VANS 08-12 Body Control (BCM); (center dash)
G8 08-09 Body Control (BCM); (center dash)
IMPALA 06-13 Body Control (BCM); (LH dash)
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TAHOE / YUKON / YUKON XL 10 Body Control (BCM); (under steering column), ID 20815898 or 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
This module is also a direct replacement for the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934763, 95151084.

Frequently Asked Questions

What exactly is a Cloning Service?

What exactly is a Cloning Service?

Our cloning service is a process where our technicians transfer the essential vehicle-specific data (like VIN, security information, and key fob programming) from your original BCM to the replacement unit. This makes the new module plug-and-play, so you don’t need to have it programmed at a dealership.

Do I need to send my original BCM to you?

What exactly is a Cloning Service?

Our cloning service is a process where our technicians transfer the essential vehicle-specific data (like VIN, security information, and key fob programming) from your original BCM to the replacement unit. This makes the new module plug-and-play, so you don’t need to have it programmed at a dealership.

Will this fix a no-start problem?

What exactly is a Cloning Service?

Our cloning service is a process where our technicians transfer the essential vehicle-specific data (like VIN, security information, and key fob programming) from your original BCM to the replacement unit. This makes the new module plug-and-play, so you don’t need to have it programmed at a dealership.

What if my original part number isn’t 25934762?

What exactly is a Cloning Service?

Our cloning service is a process where our technicians transfer the essential vehicle-specific data (like VIN, security information, and key fob programming) from your original BCM to the replacement unit. This makes the new module plug-and-play, so you don’t need to have it programmed at a dealership.

Is any special equipment needed for the post-installation procedures?

What exactly is a Cloning Service?

Our cloning service is a process where our technicians transfer the essential vehicle-specific data (like VIN, security information, and key fob programming) from your original BCM to the replacement unit. This makes the new module plug-and-play, so you don’t need to have it programmed at a dealership.

Genuine OEM

Yes

Condition

Refurbished

MPN

25934762

Interchange part number

PartNumber

591

Model

Hummer H2

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top