2008-2009 Hummer H2 BCM 20921436 Programmed to Your VIN

End Your H2’s Electrical Nightmares

Restore full functionality to your 2008-2009 Hummer H2 with this VIN-programmed Body Control Module. It’s the definitive fix for common electrical problems like erratic power windows, security system faults, and flickering lights. Arrives ready for installation, no dealer visit required. Take control of your repair and get your Hummer back to perfect working order. Order yours today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-893 Categories: ,
Guaranteed Safe Checkout

Tired of Chasing Electrical Gremlins in Your Hummer H2?

If your 2008-2009 Hummer H2 is experiencing bizarre electrical issues—like power windows with a mind of their own, flickering interior lights, or a security system that randomly prevents the engine from starting—you’re likely dealing with a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s comfort and security features. When it starts to fail, it can cause a cascade of frustrating and seemingly unrelated problems. This isn’t just an annoyance; it’s a critical component for your vehicle’s daily operation.

A Technician’s Notebook: The Ghost in the Machine

I remember a 2008 H2 that came into my shop a few years back. The owner was at his wit’s end. One day the radio wouldn’t turn off even with the key out, the next day the power locks wouldn’t work, and the final straw was the security light flashing, leaving him stranded. He’d already replaced the battery and checked fuses. After connecting my diagnostic scanner, I saw a slew of communication error codes, primarily a U0140 – Lost Communication With Body Control Module. This is a classic sign. The BCM wasn’t just failing; it was intermittently dropping off the vehicle’s data network, creating chaos. Replacing the BCM with a VIN-programmed unit like this one solved every single issue instantly. It’s a fix I’ve performed on hundreds of GM vehicles over the years.

Is Your Hummer H2 Showing These Symptoms?

A failing BCM can manifest in many ways. If you’re noticing any of the following, it’s a strong indicator that your module needs replacement:

  • ✔ Erratic or non-functional power windows, door locks, and mirrors.
  • ✔ Interior or exterior lights that stay on, flicker, or don’t work at all.
  • ✔ The security or anti-theft system light is illuminated, preventing the engine from cranking.
  • ✔ The horn honking unexpectedly or not working when pressed.
  • ✔ Diagnostic Trouble Codes (DTCs) related to communication loss with the BCM, such as U0140.
  • ✔ Wipers activating on their own or not responding to the switch.

The Smart Solution: Pre-Programmed for Your Vehicle

The biggest headache with BCM replacement has always been the programming. Traditionally, you’d have to buy the part, install it, and then have your vehicle towed to a dealership for an expensive programming session. We eliminate that entire process. Simply provide us with your vehicle’s VIN during checkout, and our technicians will program this module with the latest GM software specific to your 2008-2009 Hummer H2. It arrives at your door ready for installation, saving you time, money, and a trip to the dealer.

A Straightforward Guide to BCM Installation

  1. ✔ Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
  2. ✔ Locate the BCM: On the 2008-2009 Hummer H2, the Body Control Module is typically located on the driver’s side, mounted to the firewall or under the dashboard.
  3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt the module from its mounting bracket.
  4. ✔ Install the New Module: Mount your new, pre-programmed BCM in the same location. Securely reconnect all electrical connectors.
  5. ✔ Reconnect Power: Reattach the negative battery terminal.
  6. ✔ Perform Final Steps: Start the vehicle. As noted below, some vehicles may require a simple relearn procedure for the brake pedal position sensor or airbag system.

Important Post-Installation Information

While this module is delivered ready to function, some vehicle systems may need to be re-synced after installation. This is a normal part of the process.

  • Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This requires a professional-grade scan tool to sync the systems and clear the light.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light operation and traction control function.
  • No Core Charge: You are not required to send your old BCM back to us. Keep your original part.

Disclaimer: Procedures can vary slightly by vehicle year and specific options. We always recommend consulting a factory service manual or a qualified professional if you are unsure about any step.

Will This Fit My Vehicle?

This Body Control Module is a direct-fit replacement for 2008-2009 HUMMER H2 models. It is also a compatible replacement for a wide range of other GM vehicles and supersedes numerous part numbers. Please verify your original part number against the list below to ensure compatibility.

Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Also Fits: Acadia (07-12), Avalanche 1500 (10), Caprice (11-13), Captiva Sport (12), CTS (08-13), DTS (06-11), Enclave (08-12), Equinox (07-09), Escalade / ESV / EXT (10), Express / Savana Vans (08-12), G8 (08-09), Impala (06-13), Lucerne (06-11), Monte Carlo (06-07), Outlook (07-10), SRX (07-09), STS (10), Suburban 1500 (10), Tahoe (10), Torrent (07-09), Traverse (09-12), Vue (08-10), Yukon / XL 1500 (10). (Please verify specific options and module IDs as listed in the original fitment data).

Frequently Asked Questions

Do I need to do any programming myself?

No. We handle all the programming for you before shipping. Just provide your VIN at checkout, and the module will arrive ready to install.

Is this a simple plug-and-play installation?

For the most part, yes. You simply swap the old module with this new one. However, as noted, some vehicles may require a simple relearn procedure for the airbag or brake systems, which may require a scan tool.

What happens if I don’t provide my VIN?

We cannot ship the module without your vehicle’s 17-digit VIN. The programming is essential for the part to function correctly in your specific vehicle. We will contact you after your purchase to get this information.

Will this fix my ‘Service Security System’ message?

A faulty BCM is a very common cause of security system errors and no-start conditions. While not a guarantee for every situation, replacing a bad BCM often resolves these specific issues.

Do I have to return my old BCM?

No, there is no core charge for this part. You can keep your old module.

Genuine OEM

Yes

Condition

Refurbished

MPN

20921436

Interchange part number

PartNumber

591

Model

Hummer H2

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top