2008–2009 G8 Body Control Module 25892622 | Programmed to Your VIN

Restore Your G8’s Electrical System

Experiencing flickering lights, dead power windows, or a no-start condition in your 2008-2009 Pontiac G8? This Body Control Module (BCM) is the fix. We pre-program it to your car’s VIN, so it’s ready to install out of the box—no dealer visit required for programming. Fix your issue today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1080 Categories: ,
Guaranteed Safe Checkout

Is Your Pontiac G8 Acting Possessed?

If you’re dealing with a frustrating mix of electrical gremlins—flickering lights, power windows with a mind of their own, a security system that won’t cooperate, or even a car that refuses to start—the culprit is often the Body Control Module (BCM). As the central nervous system for your vehicle’s electronics, when the BCM fails, it can create a cascade of confusing and seemingly unrelated problems. In my 20+ years in the shop, I’ve seen these exact issues on countless GM vehicles, and the BCM is one of the first places a seasoned technician will look.

The Simple, Reliable Solution for Your G8

Forget expensive diagnostic fees and the hassle of getting your car towed to a dealership for programming. This is a direct-fit replacement 2008–2009 G8 Body Control Module that arrives at your door programmed specifically for your vehicle. All we need is your Vehicle Identification Number (VIN) after purchase. We handle the complex part—loading the latest GM software—so you can focus on the straightforward installation.

“A customer’s 2009 G8 came in last week with the radio cutting out and the interior lights staying on, draining the battery overnight. After confirming power and grounds were good, we suspected the BCM. A quick check of the BCM, located in the center dash area, revealed faint traces of corrosion on the connector pins—a common issue from a minor, unnoticed windshield leak. Swapping in a pre-programmed BCM like this one had him back on the road in under an hour, with all electrical systems functioning perfectly.”

Key Features & Benefits:

  • VIN-Programmed Convenience: We flash the module with the latest GM software using your VIN. It’s ready for installation right out of the box, saving you a trip to the dealer.
  • Restores Full Functionality: Solves common BCM failure symptoms like erratic lights, faulty power accessories, security system errors, and communication issues.
  • Direct-Fit Replacement: Engineered to be a perfect match for the original, ensuring a seamless installation process.
  • Broad Compatibility: This module, part number 25892622, also serves as a direct replacement for a wide range of other GM vehicles and part numbers.

Easy Installation Guide

Installing your new 2008–2009 G8 Body Control Module is a manageable task for a confident DIYer. For the G8, the BCM is typically located in the center dash area, often behind the glove box or radio.

  1. Safety First: Always disconnect the negative terminal from your car’s battery and wait a few minutes before starting work.
  2. Access the Module: Carefully remove the necessary dash trim panels to gain access to the BCM. This may involve removing the glove box assembly.
  3. Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old module from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical harnesses.
  5. Final Steps & Reassembly: Reassemble your dash panels, reconnect the battery, and proceed with the necessary post-installation procedures outlined below.

CRITICAL: Post-Installation Procedures

A professional diagnostic scan tool is required for these final steps. Failure to perform these procedures will result in warning lights and potential system malfunctions.

  • Airbag System Reset: You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system (SDM) and turns off the airbag warning light.
  • Brake Pedal Position Sensor Relearn: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated after BCM replacement to ensure proper brake light operation and stability control function.

This Module Replaces The Following Part Numbers:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Guaranteed Fitment For:

This part is guaranteed to fit your 2008-2009 Pontiac G8. It also fits a wide variety of other GM models including the Acadia, Enclave, Traverse, Equinox, Tahoe, Yukon, Impala, Express/Savana vans, and more. Please verify your part number to ensure compatibility.

Genuine OEM

Yes

Condition

Refurbished

MPN

25892622

Interchange part number

PartNumber

591

Model

G8

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top