2008 – 2009 CTS Engine Control Module 12628387 Programmed to Your VIN

Restore Your Vehicle’s Performance

Experiencing stalling, no-start, or a persistent check engine light on your 2008-2009 GM vehicle? This Engine Control Module (12628387) is the solution. It arrives programmed to your VIN with the latest GM software, saving you a trip to the dealer. Fix your issue today!

$249.00

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01037-18 Categories: ,
Guaranteed Safe Checkout

Is Your GM 3.6L Engine Running Rough, Stalling, or Not Starting at All?

If you’re behind the wheel of a 2008-2009 Cadillac CTS, STS, or a 2009 GM SUV like the Acadia or Traverse, you know it’s a solid vehicle. But when the brain of the engine—the Engine Control Module (ECM)—starts to fail, it can cause a host of confusing and frustrating problems. You might be experiencing a persistent Check Engine Light, erratic engine behavior, poor fuel mileage, or even a vehicle that refuses to start. These aren’t just annoyances; they’re signs that the central command center for your engine is in trouble.

A Technician’s Real-World Experience

“A customer’s 2009 Acadia came into the shop last month with a no-start condition after intermittent stalling for weeks. The owner had already replaced the battery and checked the fuel pump. After hooking up my scan tool, I found multiple communication loss codes with the ECM. On these particular models, the ECM is located right behind the fan shroud, exposing it to constant heat cycles and vibration. Over years of service, this environment can cause microscopic cracks in the circuit board’s solder joints, leading to the exact intermittent failures the customer described. We confirmed the diagnosis, and a properly programmed replacement ECM was the definitive fix.”

Common Symptoms of a Failing ECM in GM 3.6L Vehicles:

In my 20+ years of diagnostics, I’ve seen these modules cause a wide range of issues. If your vehicle is showing any of these signs, the ECM is a primary suspect:

  • Check Engine Light: Often with communication-related Diagnostic Trouble Codes (DTCs) like U0100 (Lost Communication With ECM/PCM).
  • No-Start Condition: The engine cranks but won’t fire up because the ECM isn’t commanding the fuel injectors or ignition coils.
  • Engine Stalling: The vehicle may stall unexpectedly while driving or when coming to a stop.
  • Poor Performance & Fuel Economy: The engine may run rough, hesitate on acceleration, or use significantly more fuel than usual.
  • Erratic Transmission Shifting: The ECM communicates with the Transmission Control Module (TCM), and a faulty ECM can cause harsh or incorrect shifting.
  • Cooling Fans Running Constantly: As a fail-safe, the ECM may command the cooling fans to run at full speed continuously, even when the engine is cold.

The Hassle-Free Solution: A Pre-Programmed ECM

Replacing the ECM on these vehicles isn’t just a simple swap. A new module from the dealership is a blank slate; it must be professionally programmed (or ‘flashed’) with your vehicle’s specific software and Vehicle Identification Number (VIN). This typically means towing your vehicle to a dealer and paying hundreds in labor and programming fees.

We eliminate that entire step. This Engine Control Module, part number 12628387, is the direct, reliable solution you need. When you order from us, we take care of the complex part for you.

Here’s How Our Simple Process Works:

  1. Place Your Order: Purchase this ECM.
  2. Provide Your VIN: After your purchase, simply send us your vehicle’s 17-digit VIN.
  3. We Handle the Programming: Our experts will flash the module with the latest, most stable GM-approved software specific to your exact vehicle. This ensures perfect compatibility and performance.
  4. Install and Drive: We ship the ready-to-install module directly to you. In most cases, installation is straightforward, and no further programming is required. You can get your vehicle back on the road quickly and confidently.

Guaranteed Compatibility and Fitment

This module is a direct replacement for several original part numbers, ensuring a perfect match for your vehicle. It is fully compatible with the following part numbers:

  • ✔ 12623325
  • ✔ 12628387
  • ✔ 12605672
  • ✔ 12630594
  • ✔ 19300016

This ECM is verified to fit the following vehicles:

  • 2008 Cadillac CTS: Electronic Control Module; (RH front engine compartment), (3.6L), VIN V (8th digit)
  • 2009 Cadillac CTS: Electronic Control Module; (RH front engine compartment), 3.6L, VIN V (8th digit)
  • 2008 Cadillac STS: Electronic Control Module; (RH engine), 3.6L
  • 2009 Cadillac STS: Electronic Control Module; (RH engine), (3.6L)
  • 2009 GMC Acadia: Electronic Control Module; (behind fan shroud)
  • 2009 Chevrolet Traverse: Electronic Control Module; (behind fan shroud)
  • 2009 Buick Enclave: Electronic Control Module; (behind fan shroud)
  • 2009 Saturn Outlook: Electronic Control Module; (behind fan shroud)

Don’t let a faulty ECM keep your vehicle sidelined. Order this professionally programmed Engine Control Module today and restore the performance and reliability you depend on.

Genuine OEM

Yes

Condition

Refurbished

MPN

12628387

Brand

GM

Year

2009

Model

CTS

Hardware Type

Interchange part number

Manufacturer Part Number

, , , ,

Scroll to Top