2007 Yukon XL 1500 Engine Control Module 12603892 Programmed to Your VIN

Restore Your 2007 Yukon XL 1500’s Performance

Is your truck suffering from a check engine light, no-start condition, or erratic performance? This Engine Control Module (ECM) is the solution. It arrives programmed to your vehicle’s VIN with the latest GM software, making installation simple. Fix your issue today!

$134.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00399-88 Categories: ,
Guaranteed Safe Checkout

Is Your 2007 Yukon XL 1500 Acting Possessed?

If you’re dealing with a 2007 Yukon XL 1500 that’s suddenly developed a mind of its own, you’re not alone. I’ve seen hundreds of these GMT900 platform trucks and SUVs in my shop over the years, and the symptoms are often frustratingly vague: a persistent Check Engine Light, strange transmission shifting, a sudden drop in fuel economy, or the worst-case scenarioโ€”it cranks but won’t start. These aren’t just random glitches; they’re classic signs that the brain of your engine, the Engine Control Module (ECM), is failing.

From the Shop Floor: A Real-World Scenario

“A customer’s 2007 Yukon XL 1500 came in last week on a tow truck. It would crank all day but never fire up. The owner had already replaced the fuel pump and crank sensor, chasing the problem. When I connected my professional scan tool, it couldn’t communicate with the ECM at allโ€”a dead giveaway. The module, located under the battery tray, had subtle signs of corrosion on the casing. After confirming power and ground to the module were good, we knew the ECM itself was the culprit. We installed one of our pre-programmed modules, and the truck fired up on the first try. Itโ€™s a story Iโ€™ve seen play out time and time again.”

Why GM ECMs Fail and What to Look For

The ECM, also known as the Engine Control Computer, is the master controller for your engine’s performance. It processes data from dozens of sensors to manage everything from fuel injection and ignition timing to transmission shift points and emissions controls. On many of these GM trucks and SUVs, including your Yukon, the ECM is mounted in a vulnerable spot: on the driver’s side frame rail, right below the battery. Over two decades, I’ve seen this location lead to failures from:

  • โœ” Heat Cycles: Constant exposure to engine and road heat stresses the delicate internal circuit boards and solder joints.
  • โœ” Vibration: The engine and road vibrations can, over many years and miles, cause microscopic cracks in the circuitry.
  • โœ” Moisture & Corrosion: This is the big one. A leaking battery, road salt, or high-pressure washes can introduce moisture, leading to corrosion on the pins and internal failure of the module.

The Simple, Reliable Solution: A VIN-Programmed ECM

Replacing a failed ECM used to mean a trip to the dealership for a new part and several hundred dollars in programming fees. We eliminate that hassle. This Engine Control Module is a direct, reliable replacement for your original, and we handle the most critical step for you.

Hereโ€™s how it works:

  1. You purchase this module.
  2. You provide us with your vehicle’s 17-digit VIN during checkout or by message.
  3. Our technicians use your VIN to flash the module with the latest, most stable GM-certified software specifically for your 2007 Yukon XL 1500’s configuration.
  4. We ship you a module that is truly plug-and-play. No dealer visit required.

Key Benefits of This Module

  • โœ” VIN-Specific Programming: Arrives ready for installation, loaded with the correct software for your truck’s engine, transmission, and options.
  • โœ” Resolves Common Issues: Corrects problems like no-start conditions, harsh shifting, false trouble codes (DTCs), and poor engine performance caused by a faulty ECM.
  • โœ” Direct Fit Guarantee: Engineered to be a direct replacement for part number 12603892 and other compatible numbers.
  • โœ” No Core Charge: You don’t have to worry about the cost or hassle of sending your old, failed part back to us.

Broad Compatibility Across the GM Lineup

This ECM, part number 12603892, is not just for the Yukon XL. It’s a workhorse module used across a wide range of GM vehicles from this era. It is a direct replacement for part numbers 12589297, 12597121, and 19210738. It fits many popular models, including:

  • โœ” Chevrolet Silverado, Suburban, Tahoe, Avalanche
  • โœ” GMC Sierra, Yukon
  • โœ” Cadillac Escalade
  • โœ” Hummer H2
  • โœ” And many other GM cars and SUVs from 2006-2008 (please verify your part number or consult the detailed fitment list).

Don’t let a bad ECM keep your truck off the road. This is the straightforward, professional-grade fix that gets you running right again. Order now and provide your VIN to get the process started.

Genuine OEM

Yes

Condition

Refurbished

MPN

12603892

Interchange part number

PartNumber

590

Model

Yukon Xl 1500

Year

2007

Brand

GM

Manufacturer Part Number

, , ,

Scroll to Top