2007 Yukon Engine Control Module ECM 19210738 Programmed to Your VIN

Restore Your 2007 Yukon’s Performance!

Fix frustrating issues like no-starts, rough running, and persistent check engine lights with this Engine Control Module. It arrives programmed to your vehicle’s VIN with the latest GM software, saving you a trip to the dealer. Get back on the road fastโ€”order today!

$134.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00399-116 Categories: ,
Guaranteed Safe Checkout

Is Your 2007 Yukon Acting Up? It Could Be The Brains of The Operation.

If your 2007 GMC Yukon is suddenly giving you headachesโ€”like refusing to start, running rough, stalling unexpectedly, or flashing a persistent Check Engine Lightโ€”the problem might be deeper than a simple sensor. As the central computer for your engine, the Engine Control Module (ECM) is responsible for managing everything from fuel mixture and ignition timing to transmission shifts and emissions controls. When it starts to fail, the symptoms can be confusing and widespread.

“A customer’s 2007 Yukon came in last week with these exact symptoms…”

The truck had a no-crank, no-start condition that appeared randomly. The owner had already replaced the battery and checked the starter. When I connected my professional scan tool, I couldn’t communicate with the ECM at allโ€”a classic sign of an internal failure. After years of exposure to engine bay heat and vibrations, the delicate internal circuits had finally given out. We confirmed the diagnosis by checking power and ground at the module, and everything pointed to a failed ECM. This is a scenario I’ve seen hundreds of times on these GMT900 platform trucks and SUVs.

Why a Simple Swap Isn’t Enough

Replacing an ECM on a modern vehicle like your Yukon isn’t just a matter of unplugging the old one and plugging in a new one. These modules are programmed specifically to your vehicle’s unique Vehicle Identification Number (VIN). This programming syncs the ECM with your truck’s specific engine, transmission, anti-theft system (Pass-Key/VATS), and other onboard electronics. Installing a non-programmed module will result in a no-start condition and a vehicle that’s essentially bricked until it’s towed to a dealership for expensive programming.

The Direct, Hassle-Free Solution

This is where we come in. We take the guesswork and the dealership visit out of the equation. This Engine Control Module is a direct-fit replacement for your 2007 Yukon and a wide range of other GM vehicles. The critical difference is our service: we flash the module with the latest official GM software updates, programmed specifically to your truck’s VIN before it ever leaves our facility.

This means you get a module that is truly ready for installation right out of the box. In most cases, a security relearn procedure may be required, which is a simple process you can do yourself in about 30 minutes without any special tools.

  • โœ” Eliminate Guesswork: Solves common issues like no-start, rough idle, poor fuel economy, and false sensor codes.
  • โœ” Save Time & Money: No need for an expensive trip to the dealership for programming. We handle it for you.
  • โœ” Plug & Play Ready: Arrives flashed to your VIN. Just install it and perform the simple security relearn.
  • โœ” Latest Software: We load the most current GM calibrations to ensure optimal performance and efficiency.
  • โœ” Guaranteed Compatibility: This module is a direct replacement for several part numbers, ensuring a perfect match.

Installation Location

On most of the compatible trucks and SUVs like the 2007 Yukon, Tahoe, and Silverado, you’ll find the ECM located in the engine bay on the driver’s side, mounted to a bracket underneath the battery tray. Always disconnect the vehicle’s battery before attempting to unplug or replace any electronic module.

This Module is a Direct Replacement for Part Numbers:

12589297, 12597121, 12603892, 19210738

Guaranteed Fitment For The Following Vehicles:

This ECM is engineered to work with a broad range of GM models. Please verify your vehicle is on this list to ensure proper fitment.

  • โœ” Cadillac Escalade, ESV, EXT (2007) – Electronic Control Module; (LH front under battery)
  • โœ” Chevrolet Avalanche 1500 (2007) – Electronic Control Module; (LH front under battery)
  • โœ” Chevrolet Corvette (2006-2007) – Electronic Control Module; (RH engine compartment)
  • โœ” Chevrolet Equinox (2007) – Electronic Control Module; (LH engine compartment)
  • โœ” Chevrolet Impala (2007) – Electronic Control Module; (lower part of air cleaner box), 3.5L or 3.9L
  • โœ” Chevrolet Malibu (2007) – Electronic Control Module; 3.5L or 3.9L
  • โœ” Chevrolet Monte Carlo (2007) – Electronic Control Module; (lower part of air cleaner box), 3.5L or 3.9L
  • โœ” Chevrolet Silverado 1500, 2500, 3500 Pickup (2007) – New style (smooth door skin), (LH front under battery)
  • โœ” Chevrolet Suburban 1500, 2500 (2007) – Electronic Control Module; (LH front under battery)
  • โœ” Chevrolet Tahoe (2007) – Electronic Control Module; (LH front under battery)
  • โœ” GMC Sierra 1500, 2500, 3500 Pickup (2007) – New style (smooth door skin), (LH front under battery)
  • โœ” GMC Sierra Denali (2007) – New style (smooth door skin), (LH front engine compartment)
  • โœ” GMC Yukon & Yukon XL 1500, 2500 (2007) – Electronic Control Module; (LH front under battery)
  • โœ” Hummer H2 (2007) – Electronic Control Module; (LH front under battery), engine control
  • โœ” Pontiac G6 (2007) – Electronic Control Module; (LH front engine compartment), 3.5L or 3.9L
  • โœ” Pontiac G8 (2008) – Electronic Control Module; 6.0L
  • โœ” Pontiac Torrent (2007) – Electronic Control Module; (LH engine compartment)
  • โœ” Saturn Aura (2007) – Electronic Control Module; (RH firewall), 3.5L
Genuine OEM

Yes

Condition

Refurbished

MPN

19210738

Interchange part number

PartNumber

590

Model

YUKON

Year

2007

Brand

GM

Manufacturer Part Number

, , ,

Scroll to Top