2007 Silverado 2500 ECM 12603892 | Programmed to Your VIN

Fix Frustrating Engine Problems

Get your 2007 Silverado 2500 running like new with this pre-programmed Engine Control Module (ECM). It arrives flashed to your specific VIN with the latest GM software, eliminating the need for a costly dealer visit. This direct-fit module solves common issues like stalling, no-starts, rough idle, and check engine lights. Order today to restore your truck’s reliability and performance!

$134.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00399-72 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your GM Truck or SUV

Is your 2007 Silverado 2500 running rough, stalling unexpectedly, or throwing confusing check engine light codes? A failing Engine Control Module (ECM) is often the culprit behind these frustrating and hard-to-diagnose issues. As the central computer of your vehicle, the ECM controls everything from fuel mixture and ignition timing to transmission shifting. When it falters, the entire vehicle’s performance suffers. This replacement ECM, part number 12603892, is the definitive solution to get your truck back on the road, running smoothly and reliably.

We take the guesswork and high cost out of the repair process. Unlike a generic module from a parts store or a costly trip to the dealership, this unit arrives at your door pre-programmed with the latest official GM software, specifically matched to your vehicle’s VIN. This means no expensive programming tools or additional labor costs are required. It’s a direct-fit, plug-and-play solution designed for a hassle-free installation.

Case Study: A Tricky Diagnosis

I remember a 2007 Sierra 2500 with the 6.0L that came into my shop with a bizarre, intermittent no-start condition. The owner had already replaced the battery, alternator, and starter to no avail. It would run fine for days, then refuse to crank. When it did act up, there were no clear codes, just a loss of communication with the ECM on the scan tool (a classic U0100). After checking all the power and ground circuits to the module, we found they were solid. The issue was internal to the ECM; a hairline fracture on the circuit board would separate when the engine bay temperature changed, causing the complete shutdown. Swapping in a VIN-programmed 2007 Silverado 2500 ECM like this one solved the problem permanently. The customer was relieved to finally have a reliable truck again.

Is Your Vehicle Showing These Symptoms?

A failing ECM can manifest in many ways. If you’re experiencing any of the following, it’s a strong indicator that your engine’s computer needs attention:

  • ✔ Check Engine Light is on with codes like P0601, P0602, P0606, or U0100
  • ✔ Engine cranks but refuses to start
  • ✔ Intermittent stalling or shutting off while driving
  • ✔ Noticeable drop in fuel economy
  • ✔ Rough or unstable idle
  • ✔ Harsh or erratic automatic transmission shifting
  • ✔ Failure to pass an emissions test

A Straightforward Guide to Installation

Installing your new 2007 Silverado 2500 ECM is a manageable job for a DIYer with basic tools. On most GMT900 trucks and SUVs, the module is located in the front left of the engine bay, under the battery tray.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and secure it away from the post.
  2. Access the Module: You will likely need to remove the battery and the battery tray to gain clear access to the ECM.
  3. Disconnect the Old ECM: Carefully unplug the electrical connectors. There are typically locking tabs that need to be released. Avoid pulling on the wires themselves.
  4. Remove the Old ECM: Unbolt the old module from its mounting bracket.
  5. Install the New ECM: Mount your new, pre-programmed ECM in place and tighten the bolts. Reconnect the electrical harnesses, ensuring they click securely into place.
  6. Reassemble: Reinstall the battery tray and the battery. Reconnect the negative battery terminal.
  7. Final Step (If Needed): In some cases, a Crankshaft Position System Variation (CASE) Relearn procedure may be required to clear a P1336 code. This can be done with most mid-range professional scan tools.

Verified Vehicle Compatibility

This module is a direct replacement for part numbers 12589297, 12597121, 12603892, and 19210738, and fits a wide range of GM vehicles. Please verify your model and options below:

Chevrolet:
AVALANCHE 1500 (2007), CORVETTE (2006-07), EQUINOX (2007), IMPALA (2007, 3.5L/3.9L), MALIBU (2007, 3.5L/3.9L), MONTE CARLO (2007, 3.5L/3.9L), SILVERADO 1500 PICKUP (2007, New Style), SILVERADO 2500 PICKUP (2007, New Style, 6.0L), SILVERADO 3500 PICKUP (2007, New Style, 6.0L), SUBURBAN 1500 (2007), SUBURBAN 2500 (2007), TAHOE (2007)

GMC:
SIERRA 1500 PICKUP (2007, New Style), SIERRA 2500 PICKUP (2007, New Style, 6.0L), SIERRA 3500 PICKUP (2007, New Style, 6.0L), SIERRA DENALI (2007, New Style), YUKON (2007), YUKON XL 1500 (2007), YUKON XL 2500 (2007)

Cadillac:
ESCALADE (2007), ESCALADE ESV (2007), ESCALADE EXT (2007)

Other GM:
HUMMER H2 (2007), PONTIAC G6 (2007, 3.5L/3.9L), PONTIAC G8 (2008, 6.0L), PONTIAC TORRENT (2007), SATURN AURA (2007, 3.5L)

Frequently Asked Questions

Frequently Asked Questions

Do I need to have this ECM programmed by a dealer?

No. We handle all the programming for you before shipment. Simply provide your vehicle’s 17-digit VIN during checkout, and we will flash the module with the latest GM software specific to your truck. It arrives ready to install.

What does ‘New Style (smooth door skin)’ mean for my 2007 Silverado/Sierra?

In 2007, GM produced both the old body style (known as ‘Classic’) and the new GMT900 body style. The ‘New Style’ with the smooth door skin refers to the GMT900 platform. This ECM is for that new body style.

Will this fix my specific check engine light code?

This module is a guaranteed fix for internal ECM failure codes, such as P0601, P0606, or processor errors. While it can resolve issues causing other codes, you should always diagnose the root cause. For example, an O2 sensor code could be a bad sensor or a bad ECM driver for that sensor.

What is a CASE Relearn and is it difficult?

A CASE (Crankshaft Position System Variation) Relearn synchronizes the ECM with the crankshaft position sensor. After installing the new ECM, you might see a P1336 code. This procedure is required to clear it. It does not affect drivability but will keep the check engine light on. Most independent shops or anyone with a bi-directional scan tool can perform it in a few minutes.

Is this a reliable, long-term solution?

Absolutely. We use quality modules and flash them with the most current and stable software available from GM. This often corrects underlying software bugs that may have existed from the factory, providing a more robust and reliable solution for your vehicle.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

12603892

Interchange part number

PartNumber

590

Model

Silverado 2500 Pickup

Year

2007

Brand

GM

Manufacturer Part Number

, , ,

Scroll to Top