Is your 2007 HUMMER H2 experiencing frustrating and unpredictable issues like stalling, rough idling, a persistent check engine light, or a complete no-start condition? These are common indicators of a failing Engine Control Module (ECM), the central computer that manages your vehicle’s engine performance, fuel delivery, and emissions. A faulty ECM can cripple your H2, leaving you stranded and facing a costly trip to the dealership. Restore your vehicle’s reliability and performance with our pre-programmed, direct-fit replacement ECM.
This isn’t just a generic part off the shelf. We take the guesswork and complexity out of the repair process. When you order, you provide us with your vehicle’s unique Vehicle Identification Number (VIN). Our technicians then flash this module with the latest, most stable software updates directly from General Motors, ensuring it is perfectly matched to your H2’s specific configuration. This means no expensive programming tools or dealer visits are required for installation. It arrives at your door ready to be installed, allowing for a straightforward, plug-and-play solution.
We had a 2007 H2 come into the shop with a ghost of a problem. The owner complained of intermittent stalling at stoplights, but it would always start right back up. There were no consistent trouble codes, just a random U0100 (Lost Communication with ECM) that would pop up now and then. We checked wiring, grounds, and power feeds for hours. Everything seemed fine. On a hunch, we monitored the ECM’s internal temperature data. We noticed that right before it would stall, the temp reading would spike erratically. The module was failing internally when it got warm, but not enough to throw a specific component code. Replacing the ECM with a VIN-programmed unit like this one solved the problem instantly. It’s a reminder that with complex electronics, the symptoms aren’t always straightforward.
Common Symptoms of a Failing ECM
- ✔ Check Engine Light is illuminated with various trouble codes
- ✔ Engine stalling or shutting off while driving
- ✔ Rough or erratic engine idle
- ✔ Noticeable decrease in fuel economy
- ✔ Difficulty starting the engine or a no-start condition
- ✔ Transmission shifting problems or harsh shifts
- ✔ Communication errors with diagnostic scan tools
The Superior Solution for Your 2007 HUMMER H2 ECM
Choosing our pre-programmed 2007 HUMMER H2 ECM is the most efficient and reliable way to get your vehicle back in top condition. By programming the module to your VIN before shipping, we eliminate the need for on-vehicle programming, which can be complex and requires specialized equipment. This module is a direct replacement for multiple GM part numbers, including 12589297, 12597121, 12603892, and 19210738, ensuring broad compatibility. The unit you receive will have the most current GM calibrations to optimize engine efficiency, emissions, and overall performance, often correcting issues you didn’t even know were related to outdated software.
Installation is simple for a DIY mechanic or a professional technician. Located on the driver’s side front of the vehicle under the battery, the module can be swapped out with basic hand tools. Once the new module is connected and the battery is reconnected, your H2 will be ready to run with its new, correctly configured brain. This is the definitive fix for a wide range of engine management problems.
G8 08 Electronic Control Module; 6.0L
SUBURBAN 2500 07 Electronic Control Module; (LH front under battery)
AVALANCHE 1500 07 Electronic Control Module; (LH front under battery)
ESCALADE ESV 07 Electronic Control Module; (LH front under battery)
MALIBU 07 Electronic Control Module; 3.5L
HUMMER H2 07 Electronic Control Module; (LH front under battery), engine control
IMPALA 07 Electronic Control Module; (lower part of air cleaner box), 3.9L
MONTE CARLO 07 Electronic Control Module; (lower part of air cleaner box), 3.9L
SIERRA 1500 PICKUP 07 Electronic Control Module; new style (smooth door skin), (LH front under battery), w/o 4.3L
SIERRA 3500 PICKUP 07 Electronic Control Module; new style (smooth door skin), (LH front under battery), 6.0L
SILVERADO 1500 PICKUP 07 Electronic Control Module; new style (smooth door skin), (LH front under battery), w/o 4.3L
ESCALADE EXT 07 Electronic Control Module; (LH front under battery)
MONTE CARLO 07 Electronic Control Module; (lower part of air cleaner box), 3.5L
TORRENT 07 Electronic Control Module; (LH engine compartment)
YUKON XL 2500 07 Electronic Control Module; (LH front under battery)
MALIBU 07 Electronic Control Module; 3.9L
SILVERADO 2500 PICKUP 07 Electronic Control Module; new style (smooth door skin), (LH front under battery), 6.0L
TAHOE 07 Electronic Control Module; (LH front under battery)
SIERRA DENALI 07 Electronic Control Module; new style (smooth door skin), (LH front engine compartment)
SILVERADO 3500 PICKUP 07 Electronic Control Module; new style (smooth door skin), (LH front under battery), 6.0L
G6 07 Electronic Control Module; (LH front engine compartment), 3.9L
SIERRA 2500 PICKUP 07 Electronic Control Module; new style (smooth door skin), (LH front under battery), 6.0L
SUBURBAN 1500 07 Electronic Control Module; (LH front under battery)
CORVETTE 06-07 Electronic Control Module; (RH engine compartment)
IMPALA 07 Electronic Control Module; (lower part of air cleaner box), 3.5L
EQUINOX 07 Electronic Control Module; (LH engine compartment)
YUKON 07 Electronic Control Module; (LH front under battery)
AURA 07 Electronic Control Module; (RH firewall), 3.5L
YUKON XL 1500 07 Electronic Control Module; (LH front under battery)
G6 07 Electronic Control Module; (LH front engine compartment), 3.5L
Frequently Asked Questions
Is this part difficult to install?
No, this ECM is designed for a straightforward installation. It is programmed to your VIN, so it’s a plug-and-play part. You simply disconnect the battery, unplug the electrical connectors from the old ECM, unbolt it, and install the new one in its place. No special programming tools are needed.
Where do I provide my VIN?
After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). You can typically add this in the notes section at checkout or reply to your order confirmation email. We cannot ship the module until we have your VIN to program it.
What if my original part number is not 12603892?
This module is a direct replacement for several part numbers, including 12589297, 12597121, 12603892, and 19210738. As long as your vehicle is listed in the compatibility chart and your original part number is one of these, this module will work perfectly.
Will this fix my check engine light?
If the check engine light and associated trouble codes are being caused by a faulty ECM, then yes, this part will resolve the issue. However, it’s always recommended to have a proper diagnosis performed to ensure the ECM is the root cause of the problem and not a separate sensor or wiring issue.
Does this module come with the latest software?
Yes. We flash every module with the most current and stable software updates available from GM for your specific VIN. This ensures optimal performance, fuel economy, and reliability.