2007 Aspen & Durango 5.7L Engine Computer ECM 05094355AC

Get Back on the Road Fast!

This engine computer for your 2007 Chrysler Aspen, Dodge Durango, or Ram 1500 arrives fully programmed to your vehicle’s VIN. It’s a direct-fit, plug-and-play solution to fix running issues and clear fault codes. No dealer visit required. Order today to restore your vehicle’s reliability!

$234.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



Guaranteed Safe Checkout

Restore Peak Performance to Your 5.7L HEMI

Is your 2007 Chrysler Aspen, Dodge Durango, or Ram 1500 running rough, stalling unexpectedly, or displaying a persistent Check Engine Light? These are classic signs of a failing Engine Control Module (ECM). The ECM is the brain of your vehicle’s engine, managing everything from fuel injection and ignition timing to emissions controls and transmission shifting. When it falters, the entire vehicle suffers. This replacement engine computer, part number 05094355AC, is the definitive solution to restore your vehicle’s reliability and driving pleasure.

The Plug-and-Play Solution You Need

Forget about expensive dealership visits, towing fees, and complex programming procedures. We take the guesswork and hassle out of the repair. When you order from us, we flash this module with the latest software updates and program it specifically to your vehicle’s unique Vehicle Identification Number (VIN). This means it arrives at your doorstep ready for a simple, direct installation. Just disconnect the battery, swap the modules, reconnect the battery, and you’re ready to drive. It’s a true plug-and-play fix that gets you back on the road quickly and affordably.

From the Diagnostic Bay

We had a 2007 Dodge Durango 5.7L come into the shop on a tow truck. The customer was frustrated, explaining that it would run fine for a few minutes and then stall without warning, sometimes refusing to restart for an hour. He had already replaced the crank sensor and cam sensor based on some generic advice, with no change. After connecting our diagnostic scanner, we saw a series of communication error codes and erratic data from the ECM. Instead of a clear-cut sensor failure, the ECM itself was failing intermittently, especially as it warmed up. We installed one of our pre-programmed modules, and the Durango fired right up and ran perfectly. The customer was back on the road in under an hour, relieved to have a reliable vehicle again.

Common Symptoms of a Failing 2007 Aspen Engine Computer

  • ✔ Persistent Check Engine Light (CEL) with codes related to module communication or processor failure.
  • ✔ Engine stalling or shutting off randomly while driving.
  • ✔ Difficulty starting the engine or a complete no-start condition.
  • ✔ Noticeable decrease in fuel economy.
  • ✔ Poor engine performance, including hesitation, misfires, or rough idling.
  • ✔ Harsh or erratic automatic transmission shifting.
  • ✔ Inoperable cooling fans, leading to overheating.
  • ✔ Other electronic systems acting erratically.

Why Choose Our Programmed ECM?

This isn’t just a generic part off a shelf. It’s a fully tested and verified module prepared for your specific vehicle. We ensure that the intricate security information (SKIM) and vehicle configuration data match your VIN, eliminating the anti-theft and compatibility issues that plague unprogrammed modules. By providing your VIN and mileage at checkout, you guarantee a seamless installation. This specific 2007 Aspen Engine Computer is a reliable replacement for a wide range of original part numbers, ensuring broad compatibility for your Aspen, Durango, or Ram 1500. Please verify your original part number against our comprehensive cross-reference list to ensure a perfect match.

Simple Installation Process

  1. Safety First: Disconnect the negative terminal of your vehicle’s battery.
  2. Locate the ECM: On the 2007 Aspen and Durango, the ECM is typically located on the passenger side fender well in the engine bay.
  3. Disconnect Connectors: Carefully unplug the wiring harnesses from the old module.
  4. Remove Old Module: Unbolt the old ECM from its mounting bracket.
  5. Install New Module: Bolt the new, pre-programmed ECM into place.
  6. Reconnect: Securely plug the wiring harnesses into the new module.
  7. Final Step: Reconnect the negative battery terminal. The vehicle is now ready to start.

Frequently Asked Questions

Is this ECM truly plug-and-play?

Yes! As long as you provide your vehicle’s correct VIN during checkout, we will program the module so it is ready for installation upon arrival. No further programming or dealer intervention is required.

Where is the ECM located on my 2007 Aspen?

The Engine Control Module on a 2007 Chrysler Aspen is typically found in the engine compartment, mounted to the right-hand (passenger side) fender well.

Will this fix my specific problem?

This module is designed to correct issues directly caused by a faulty ECM. While the symptoms listed are very common for ECM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the ECM is the root cause before ordering.

Do I need to send my old part back?

This listing does not require a core return. You can keep your old module, recycle it, or dispose of it as you see fit.

What if I have a different part number?

This module is compatible with a long list of part numbers provided in the product description. Please check the list carefully. If your part number is on the list, this module will work for your vehicle.

Condition

Refurbished

Year

Conditions & Options

Programmed to your VIN 0509445AI

MPN

05094355AC

Genuine OEM

Yes

Interchange part number

PartNumber

590

Model

ASPEN

Year

2007

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , ,

GTIN

Does not apply

Scroll to Top