2007-2013 GM Body Control Module 25844480 | VIN Programmed

Restore Your Vehicle’s Electronics Instantly!

Eliminate frustrating electrical glitches with our VIN-programmed GM Body Control Module. This plug-and-play solution fixes issues with lights, windows, and security systems without a trip to the dealer. Order now for a quick, reliable repair!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01290-9 Categories: ,
Guaranteed Safe Checkout

Is Your GM Truck or SUV Plagued by Bizarre Electrical Issues?

Are your power windows refusing to cooperate? Do your interior lights have a mind of their own? Is your dashboard lit up with warning lights like the airbag or security indicator? These frustrating and seemingly unrelated electrical gremlins often point to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, managing everything from your door locks and wipers to the HVAC system. When it starts to fail, it can create a cascade of confusing and disruptive problems.

Don’t let a faulty BCM compromise your vehicle’s functionality and safety. This genuine OEM-quality GM Body Control Module, part number 25844480, is the definitive solution for restoring your vehicle’s electronic systems. We take the guesswork and hassle out of the repair by pre-programming the module to your vehicle’s specific VIN. This means no expensive trips to the dealership for programming—it arrives at your door ready for a true plug-and-play installation, loaded with the latest software updates from General Motors for optimal performance.

From the Diagnostic Bay

We had a 2009 Silverado 2500 in the shop that was driving the owner crazy. The radio would cut out, the driver’s side power window worked intermittently, and the airbag light was on with a DTC B1001. The owner had already replaced the window switch and checked the radio fuses, but the problems persisted. After a quick scan, we saw multiple communication errors pointing towards the BCM. A common mistake is to chase individual symptoms, but when you see multiple, unrelated body electronic failures, the BCM should be your primary suspect. We also checked the main ground points under the dash, as a poor ground can mimic BCM failure. In this case, the BCM itself was faulty. Installing a VIN-programmed module like this one cleared all the codes and restored every function in under 10 minutes. The key is recognizing the pattern of widespread electrical issues.

Symptoms of a Failing BCM & Key Module Features

  • ✔ Plug-and-Play Solution: Arrives pre-programmed to your vehicle’s VIN. No dealership visit required for installation or programming, saving you time and money.
  • ✔ Restores Full Functionality: Corrects erratic behavior in power windows, door locks, interior/exterior lighting, and security systems.
  • ✔ Fixes HVAC Problems: Resolves issues like an inoperative blower motor, incorrect temperature blending, or unresponsive climate controls.
  • ✔ Clears Warning Lights: Addresses persistent airbag warning lights (specifically DTC B1001) and other body-related trouble codes.
  • ✔ Eliminates Drivability Issues: Solves BCM-related problems such as stalling, misfires, or starting issues caused by security system malfunctions.
  • ✔ OEM-Quality Reliability: Built to stringent General Motors standards for durability and long-lasting performance, backed by our one-year warranty.
  • ✔ Broad Compatibility: A direct replacement for a wide range of part numbers, including 15263363, 25835966, 15878753, 20939137, and more.

Easy Installation for Your GM Body Control Module

Replacing the BCM in your Chevrolet, GMC, or Cadillac is a straightforward process that can typically be completed in your own driveway. The module is conveniently located under the driver’s side dashboard, near the steering column. The physical swap usually takes less than five minutes.

After installing the new module, some vehicles may require a couple of simple procedures to ensure all systems are communicating correctly. While our VIN programming handles the majority of the setup, it’s important to be aware of these potential post-installation steps:

  • Airbag System Sync: If the airbag warning light remains on after installation, a procedure called “Setup SDM Primary Key in BCM” is needed. This requires a professional-grade scan tool and syncs the new BCM with the vehicle’s airbag system. This is only necessary if the light is illuminated.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure the brake lights and traction control system function correctly. This is also performed with a capable diagnostic tool.

We make the process even easier with our No Core Charge policy. You don’t have to worry about the cost or hassle of sending your old, faulty module back to us. This is a direct, simple, and effective repair to get your truck or SUV back to 100%.

Frequently Asked Questions

What does ‘VIN Programmed’ mean?

It means we load your vehicle’s specific Vehicle Identification Number (VIN) and all related factory software onto the module before we ship it. This ensures it communicates perfectly with your vehicle’s other computers, just like the original part, making installation simple and effective without needing a dealer.

Will this BCM fix my specific electrical problem?

This module is the solution for a wide range of body electronic issues. If you are experiencing multiple problems like failing power windows, erratic lights, HVAC issues, and security faults, a failing BCM is the most likely cause. We recommend confirming the diagnosis with a professional scan tool if you are unsure.

Do I need any special tools for installation?

For the physical replacement, you’ll only need basic hand tools to access the module under the dashboard. However, for post-installation procedures like the airbag system sync (if needed), a professional bidirectional scan tool is required. Many local repair shops can perform these relearn procedures for a small fee.

Is this a new or used part?

This is a high-quality, OEM-standard component that has been thoroughly inspected and prepared to ensure it meets or exceeds original factory performance. It is backed by a one-year warranty for your peace of mind.

How do I know if this part fits my vehicle?

This BCM fits a wide range of 2007-2013 GM trucks and SUVs, including the Silverado, Sierra, Tahoe, Yukon, Suburban, and Escalade. Please check the detailed fitment list on this page or match your original part number to the list of compatible numbers (like 15263363 or 25835966) to ensure a perfect match.

Genuine OEM

Yes

Year
Condition

Refurbished

Model

BRAVADA

Make

Year

2008

Brand

CHEVROLET TRUCK

Warranty

1 Year

Interchange part number

MPN

15263363

Manufacturer Part Number

Scroll to Top