2007-2011 Yukon Xl 2500 Body Control Module 15940214 Programmed To Your VIN BCM

Restore Your Truck’s Electronics

Get a permanent fix for your 2007-2011 Yukon XL 2500’s electrical problems with this VIN-programmed Body Control Module. It’s the direct-fit solution for failing lights, power windows, door locks, and HVAC controls. Pre-programmed for plug-and-play installation, it eliminates the need for an expensive dealership visit. Order today to get your truck back to 100% functionality!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01290-261 Categories: ,
Guaranteed Safe Checkout

{
“title”: “2007-2011 Yukon Body Control Module BCM 15940214“,
“long_description”: “

Restore Full Electrical Function to Your GM Truck or SUV

n

Are you dealing with baffling electrical issues in your 2007-2013 GM vehicle? Flickering lights, unresponsive power windows, a dead HVAC system, or a persistent airbag light are common signs of a failing Body Control Module (BCM). This vital component acts as the central hub for your vehicle’s body electronics. When it fails, it can cause a wide range of frustrating and difficult-to-diagnose problems. This genuine OEM-quality BCM, interchangeable with part number 15940214, is the definitive solution to restore your vehicle’s performance and reliability.

nn

n

Expert Pro Tip

n

Before replacing your BCM, always inspect the main ground connections, particularly the one located under the driver’s side A-pillar kick panel. A loose or corroded ground wire can mimic the symptoms of a failed BCM and will cause problems even with a new part. A quick check can save you time and ensure a successful repair.

n

nn

Common Symptoms of a Failing BCM

n

    n

  • ✔ Unresponsive or intermittent power windows, door locks, and interior/exterior lights.
  • n

  • ✔ HVAC controls not working or blower motor operating erratically.
  • n

  • ✔ Airbag warning light is on, often with Diagnostic Trouble Code (DTC) B1001.
  • n

  • ✔ Malfunctioning security system, leading to no-start conditions or random stalling.
  • n

  • ✔ A variety of communication and body-related DTCs stored in the vehicle’s computer.
  • n

  • ✔ Wipers or other accessories activating on their own or not working at all.
  • n

nn

Plug-and-Play Replacement for your Yukon Body Control Module

n

The biggest hurdle in replacing a BCM is the need for expensive dealership programming. We eliminate that step entirely. This module is expertly pre-programmed to your vehicle’s specific VIN, ensuring it works seamlessly right out of the box. It arrives with the latest GM software updates, providing optimal performance and resolving common electronic glitches. This direct-fit replacement for your Yukon Body Control Module restores the precise factory control you’ve been missing.

n

Installation is straightforward, typically located under the driver’s side dashboard. While the physical swap is quick, be aware that some vehicles may require a post-installation procedure. If the airbag light remains on, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ function. This re-establishes communication between the BCM and the airbag system. This module is a direct replacement for multiple part numbers, including 25844480, 25835966, 15926094, and 20939137.

nn

Frequently Asked Questions

Do I need to have this BCM programmed by a dealer?

No. This Body Control Module comes fully pre-programmed to your vehicle’s VIN. It is ready for installation upon arrival, saving you time and the expense of a dealership visit.

Where is the BCM located on my 2009 GMC Sierra or Chevy Tahoe?

The BCM is typically found on the driver’s side, under the steering column and behind the lower dashboard panel. It is usually held in place by a few clips or small bolts.

Will this fix my airbag light with a B1001 code?

A faulty BCM is a common cause of the B1001 code. Replacing it should resolve the root cause, but you may need to perform an ‘SDM Key Setup’ with a professional scan tool to clear the light after installation.

What tools are required for this installation?

Basic hand tools like a socket set and trim removal tools are usually all that’s needed for the physical installation. In some cases, a diagnostic scan tool may be required for post-install procedures like an airbag system sync.

Is there a core charge for my old part?

No, there is no core charge. You can keep your old module without any hassle or need to return it.

“,
“short_description”: “

Restore Your Vehicle’s Electronics!

Fix frustrating electrical problems with this VIN-programmed Body Control Module. It arrives ready to install, restoring control over your lights, windows, locks, and HVAC system without dealer programming. Order today for a quick and reliable repair!

“,
“meta_description”: “Experiencing electrical problems? Our VIN-programmed Yukon Body Control Module is the plug-and-play fix for your GM truck or SUV. Order now and fix your vehicle!”,
“focus_keyword”: “Yukon Body Control Module”,
“image_meta”: {
“alt_text”: “2007-2011 GMC Yukon Body Control Module BCM 15940214, front view showing connectors.”,
“image_title”: “VIN Programmed GM Body Control Module 25844480 for Yukon Silverado Tahoe”,
“caption”: “OEM-quality Body Control Module (BCM) 15940214, pre-programmed for 2007-2013 GM trucks and SUVs.”,
“description”: “Detailed image of the GM Body Control Module, part number 15940214. This module controls body electronics and is a direct-fit replacement for many GM vehicles.”
}
}

Genuine OEM

Yes

Year
Condition

Refurbished

Model

Yukon Xl 2500

Make

Year

2007 – 2011

Brand

CHEVROLET TRUCK

Warranty

1 Year

Interchange part number

MPN

15940214

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , ,

Scroll to Top