2007 – 2011 GMC YUKON Body Control Module (BCM) 22860591 – Pre-Programmed to Your VIN with One-Year Warranty from Highway71AutoParts.com
Ever dealt with your 2007-2011 GMC Yukon suddenly losing power to the windows or the HVAC fan acting up during a family road trip? You’re not alone—I’ve seen countless owners frustrated by these glitches, often tracing back to a failing body control module. Questions like “why is my Yukon’s airbag light on after electrical issues?” or “how to fix intermittent door locks in a 2007 GMC Yukon” flood forums daily. The solution? This OEM-spec GM 22860591 BCM, pre-programmed to your exact VIN for seamless integration. It oversees vital systems like lights, locks, wipers, security, and climate controls, bringing your SUV back to reliable performance. Interchangeable with numbers such as 25844480, 25835966, and others, it’s a direct fit for models including Chevrolet Tahoe, Silverado, Suburban; GMC Sierra, Yukon XL; and Cadillac Escalade. As a shop veteran, I’ve installed these in Yukons hauling trailers through rough terrain, and they hold up, preventing those nagging DTCs from ruining your drive.
Common Issues & How This Fixes Them
One frequent headache in 2007-2011 GMC Yukons is erratic HVAC behavior, like the blower motor cutting out mid-commute. This often stems from a degraded BCM losing communication with climate sensors, leading to no heat on cold mornings or AC failures in summer heat. Replacing with the 22860591 restores precise control, eliminating intermittent operation. Another common sign? The airbag warning light flashing with codes like DTC B1001, triggered by internal BCM faults disrupting the supplemental restraint system— a safety risk I’ve diagnosed in vehicles post-minor collisions. This pre-programmed module clears those codes instantly, ensuring airbag readiness. Electrical gremlins, such as power windows that won’t budge or door locks failing randomly, point to BCM circuit degradation from moisture or wear. Security system woes can even cause stalling or no-start scenarios, mimicking fuel issues but rooted in anti-theft malfunctions. In my experience, grounding problems exacerbate these; a quick multimeter check during swap prevents repeats. By swapping in this unit, you regain smooth body electronics, sidestepping costly dealer visits and keeping your Yukon adventure-ready.
Key Features & Benefits
- VIN-Specific Programming: Arrives ready-to-go with the latest GM software matched to your Yukon’s VIN, skipping dealership trips and instantly resolving compatibility DTCs for hassle-free operation.
- Robust System Control: Manages everything from exterior lighting to wiper functions and anti-theft protocols, delivering consistent performance that cuts down on diagnostic headaches in daily or off-road use.
- Built for Durability: Meets strict OEM standards with a full one-year warranty, standing up to the demands of heavy towing or family hauling without premature failures.
- Wide Interchangeability: Swaps seamlessly with part numbers like 25835966, 15263363, and 22860591 itself, making it versatile for various GM trucks and SUVs while avoiding core charges.
- Proven Reliability Boost: From my bench tests, it enhances overall electrical stability, preventing issues like misfires from poor grounding and ensuring long-term peace of mind.
Easy Installation Guide
- Gather your VIN and confirm compatibility— this 22860591 is tailored for 2007-2011 Yukons, located under the steering column.
- Disconnect the battery to avoid shorts, then remove the old BCM by unplugging connectors and unbolting it (usually 2-3 screws).
- Install the new module, reconnecting wires securely and checking for clean grounds to prevent future glitches.
- Reconnect the battery and test basic functions like lights and locks.
- For post-install tweaks: Reset the airbag light via ‘Setup SDM Primary Key in BCM’ using a compatible scan tool if DTC B1001 persists.
- Some Yukons may need brake pedal recalibration—consult your manual or a tech for steps to optimize braking response and safety.
Fitment Details
Compatible with:
2007 – 2011 GMC YUKON
Verify part numbers; provide VIN for confirmation. No core charge required.
Don’t let BCM failures sideline your 2007-2011 GMC Yukon any longer—grab this pre-programmed 22860591 today for reliable fixes and expert-backed support. Order now from Highway71AutoParts.com with fast shipping to get back on the road confidently.