2007-2011 Yukon BCM Body Control Module 15940214 | VIN Programmed

Fix Your Yukon’s Electrical Problems

Tired of flickering lights, dead accessories, or a malfunctioning security system? This VIN-programmed Body Control Module is the direct-fit solution for your 2007-2011 GMC Yukon. It arrives ready for a simple, plug-and-play installation, restoring full functionality without a trip to the dealer. Get your Yukon back to perfect working order and order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01290-259 Categories: ,
Guaranteed Safe Checkout

End the Electrical Headaches in Your GM Truck or SUV

If you’re dealing with a frustrating array of electrical problems in your 2007-2011 GMC Yukon—like flickering lights, a dead instrument cluster, or a climate control system with a mind of its own—you’ve likely met the culprit: a failing Body Control Module (BCM). As the central command for your vehicle’s body electronics, a faulty BCM can create chaos. This replacement module, equivalent to part number 15940214, is the definitive, hassle-free solution. We pre-program it to your vehicle’s specific VIN, ensuring it works perfectly right out of the box, no expensive dealership visits required.

A Technician’s Notebook: The Ghost in the Machine

I once had a 2008 Sierra 2500 in the bay that was driving its owner crazy. The radio would cut out, the power locks would randomly cycle, and the airbag light was on with a DTC B1001. The owner had already replaced the battery and checked all the main grounds. Everything seemed fine on the surface. After connecting my scan tool, I noticed communication with the BCM was intermittent. We swapped in a VIN-programmed BCM, and instantly, all the gremlins vanished. It wasn’t a complex wiring issue; it was a classic internal failure of the original 2007-2011 Yukon BCM, a common issue I’ve seen hundreds of times on this GMT900 platform.

Is Your Vehicle Showing These Symptoms?

  • ✔ The security light is flashing and the vehicle won’t start or stalls intermittently.
  • ✔ Power windows, door locks, or interior lights work sporadically or not at all.
  • ✔ The HVAC system is unresponsive, or the blower motor won’t turn on.
  • ✔ An airbag warning light is illuminated, often with Diagnostic Trouble Code (DTC) B1001.
  • ✔ You’re experiencing strange electrical behavior that seems to have no logical cause.
  • ✔ The vehicle’s theft-deterrent system is malfunctioning, preventing engine start.

DIY-Friendly Installation: A 5-Minute Fix

Replacing the BCM is a straightforward job that most DIYers can complete in their driveway. It’s located in an accessible spot, and our VIN programming means you won’t need any special computer equipment for the main installation.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on electrical components.
  2. Locate the BCM: On most models, including the GMC Yukon, the BCM is found under the driver’s side dashboard, to the left of the steering column.
  3. Remove the Connectors: Carefully unplug the electrical connectors from the old module. They have release tabs that need to be pressed.
  4. Swap the Module: Unclip the old BCM from its bracket and clip the new one into place.
  5. Reconnect Everything: Plug the connectors firmly into the new module and reconnect your battery terminal. Start the vehicle to confirm functionality.
  6. Post-Install Check: In some cases, an airbag light may persist. This requires a professional scan tool to perform the “Setup SDM Primary Key in BCM” function. A brake pedal position relearn might also be necessary.

Verified Vehicle Compatibility

This module is a direct replacement for part number 15940214 and other interchangeable numbers. It is guaranteed to fit the following GM models:

Cadillac:
Escalade: 2007-2011
Escalade ESV: 2007-2011
Escalade EXT: 2007-2011

Chevrolet:
Avalanche 1500: 2007-2011
Silverado 1500/2500/3500: 2007-2013 (check notes for ’07 new style & ’13 ID)
Suburban 1500/2500: 2007-2011
Tahoe: 2007-2011

GMC:
Sierra 1500/2500/3500: 2007-2013 (check notes for ’07 new style & ’13 ID)
Sierra Denali (1500/2500/3500): 2007-2013 (check notes)
Yukon: 2007-2011
Yukon XL 1500/2500: 2007-2011

This part is interchangeable with: 25835966, 15263363, 15263497, 15878753, 15284816, 15943678, 15926094, 25790508, 25790509, 25823558, 25823559, 25835965, 25844479, 25971916, 25971917, 15901388, 20939137, 20939138, 22860591.

Frequently Asked Questions

What does a BCM do on a 2007-2011 GMC Yukon?

The Body Control Module (BCM) acts as the brain for your vehicle’s comfort and security features. It controls the power windows, locks, interior and exterior lights, wipers, HVAC system, and the anti-theft system.

Do I need to program this BCM?

No. We handle the programming for you. Simply provide your vehicle’s VIN during checkout, and we will flash the module with the latest GM software for your specific vehicle. It will arrive ready for plug-and-play installation.

Why is my airbag light still on after installing the new BCM?

This is a normal security feature. The new BCM needs to be electronically ‘introduced’ to the airbag’s Sensing and Diagnostic Module (SDM). A professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the modules and clear the light.

Where is the BCM located on a 2009 Yukon?

The BCM is located under the driver’s side of the dashboard, typically to the left of the steering column and above the emergency brake pedal assembly.

Is there a core charge for my old part?

No, there is no core charge. You can keep your old module without any hassle or extra fees.

Genuine OEM

Yes

Condition

Refurbished

Model

YUKON

Make

Year

2007 – 2011

Brand

CHEVROLET TRUCK

Warranty

1 Year

Interchange part number

MPN

15940214

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , ,

Scroll to Top