2007-2011 Suburban 2500 Body Control Module 25790509 Programmed To Your VIN BCM

Restore Your Truck’s Electronics Instantly

Fix frustrating electrical problems with this VIN-programmed Body Control Module. It’s the direct-fit, plug-and-play solution for faulty lights, windows, and locks on your GM truck or SUV, eliminating the need for a costly dealership visit. Order today to restore full functionality!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01290-413 Categories: ,
Guaranteed Safe Checkout

Is your Chevrolet Suburban or other GM truck plagued by bizarre electrical issues? Power windows with a mind of their own, flickering lights, or a security system that won’t cooperate are common signs of a failing Body Control Module (BCM). This vital component acts as the central hub for your vehicle’s body electronics. When it fails, it can cause a cascade of frustrating and difficult-to-diagnose problems. This genuine GM BCM, interchangeable with part number 25790509, is the definitive solution, arriving pre-programmed to your vehicle’s specific VIN for a true plug-and-play repair.

From the Diagnostic Bay

We had a 2009 Silverado 2500 in the shop that was driving the owner crazy. The radio would turn on and off, the driver’s side power window wouldn’t work, and the HVAC blower was intermittent. He had already replaced the window switch and the blower motor resistor with no luck. After connecting our scanner, we saw multiple communication codes pointing to a network issue. Instead of chasing individual components, we went straight to the BCM. A quick check of the power and ground connections confirmed they were solid. Swapping in a VIN-programmed BCM like this one solved all three unrelated issues in under 10 minutes. It’s a classic case of the central hub failing and causing chaos across multiple systems.

Common Symptoms of a Failing BCM

  • ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
  • ✔ Interior or exterior lights flickering, staying on, or failing to turn on.
  • ✔ HVAC climate control or blower fan malfunctions.
  • ✔ Vehicle security system acting erratically, causing no-start conditions.
  • ✔ Airbag warning light illuminated on the dash, often with DTC B1001.
  • ✔ Unexplained battery drain while the vehicle is parked.
  • ✔ Wipers behaving erratically or not responding to controls.

Key Features & Benefits

  • ✔ Plug & Play Installation: This module is professionally programmed to your vehicle’s VIN. This eliminates the need for expensive dealership programming or special tools.
  • ✔ Restores Full Functionality: Get your power accessories, lighting, and security systems working like new again.
  • ✔ OEM Quality & Reliability: Built to strict General Motors standards for long-lasting performance and perfect integration with your vehicle’s systems.
  • ✔ No Core Charge: Keep your old part. There’s no need to worry about the cost or hassle of returning a core.
  • ✔ Wide Compatibility: This BCM is a direct replacement for a wide range of GM trucks and SUVs from 2007-2013, including many Silverado, Sierra, Tahoe, Yukon, and Escalade models. It interchanges with numerous part numbers, including 25844480, 25835966, 15943678, and 20939137.

Installing Your Suburban 2500 BCM

Installation is straightforward for those with basic mechanical skills. The BCM is typically located under the driver’s side dashboard, near the steering column. After disconnecting the battery, simply unclip the electrical connectors, remove the old module, and install the new one. Reconnect the connectors and the battery. While the process is simple, there are a few post-installation procedures that may be necessary:

  • Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed using a professional-grade scan tool. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: Some models may require a brake pedal position sensor relearn to ensure proper brake light and stability control function.

Always consult a factory service manual for your specific vehicle. By ordering this pre-programmed module, you are bypassing the most complicated part of the repair—the software setup—and getting your truck back on the road faster.

Frequently Asked Questions

What does the Body Control Module (BCM) do?

The BCM is a computer that manages and controls many of your vehicle’s non-engine related electronic functions, such as power windows, door locks, interior/exterior lighting, wipers, and the security system.

Is this BCM ready to install right out of the box?

Yes. We program the module to your vehicle’s VIN before shipping, so it is ready for a plug-and-play installation without requiring a trip to the dealership for additional programming.

Do I need to return my old part?

No. There is no core charge for this part, so you can keep your original module without any extra fees or hassle.

My airbag light came on after I installed the new BCM. Is it defective?

No, this is a normal security procedure. The new BCM needs to be electronically introduced to the airbag system (SDM). This requires a professional scan tool to perform the ‘Setup SDM Primary Key in BCM’ function to turn off the light.

Will this part fit my 2008 GMC Sierra 1500?

Yes, this BCM fits a wide range of GM trucks and SUVs from 2007-2013, including the GMC Sierra, Chevrolet Silverado, Tahoe, Yukon, and Cadillac Escalade. It is a direct replacement for part numbers 25790509, 25844480, and many others listed in the description.

Genuine OEM

Yes

Year
Condition

Refurbished

Model

Suburban 2500

Make

Year

2007 – 2011

Brand

CHEVROLET TRUCK

Warranty

1 Year

Interchange part number

MPN

25790509

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , ,

Scroll to Top