2007-2011 GMC Sierra 1500 Programmed BCM | 25823558 | Plug & Play

Fix Sierra Electrical Problems Fast

Is your 2007-2011 GMC Sierra 1500 suffering from failing lights, windows, or HVAC? This OEM-quality Body Control Module arrives fully programmed to your VIN for a direct, plug-and-play installation. It’s the definitive solution to restore all body electronic functions without a trip to the dealer. Get your truck working right again.

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01290-437 Categories: ,
Guaranteed Safe Checkout

Finally, A Real Fix for Your Sierra’s Electrical Gremlins

Is your dependable GMC Sierra 1500 suddenly plagued by frustrating electrical issues? One minute the A/C works, the next it doesn’t. Power windows have a mind of their own, and strange warning lights appear on the dash. These aren’t just minor annoyances; they’re signs of a failing Body Control Module (BCM), the central command center for your truck’s body electronics. This VIN-programmed BCM is the direct, no-hassle solution to restore order and get your truck back to being the reliable workhorse you depend on.

Common Symptoms & Your Solution

If you’re experiencing any of the following problems, a failing BCM is the most likely culprit. This module is the definitive fix for:

  • Intermittent or non-working HVAC and blower motor controls.
  • An active airbag warning light, often with DTC B1001.
  • Power windows, door locks, or interior/exterior lights that work sporadically or not at all.
  • Security system malfunctions that may prevent the truck from starting.
  • A host of confusing diagnostic trouble codes related to body systems.

Instead of spending a fortune at the dealership, you can install this fully tested, programmed BCM for 2007-2011 GMC Sierra 1500 yourself in minutes. We handle the complex programming so you can handle the simple installation.

Features & Benefits

  • ✔ Plug & Play Installation: This BCM arrives pre-programmed to your truck’s specific VIN. No expensive trips to the dealership for programming are required—just install it and go.
  • ✔ Restores Full Functionality: Regain complete and reliable control over your lights, windows, locks, wipers, security system, and climate controls.
  • ✔ OEM-Grade Quality: Built to meet or exceed original equipment standards for a perfect fit and long-lasting durability, ensuring your truck operates exactly as it should.
  • ✔ Solves Annoying Electrical Issues: Puts an end to the ghost-in-the-machine problems, providing a stable and reliable electrical system you can trust.
  • ✔ Broad Compatibility: This module is a direct replacement for a wide range of part numbers, including 25823558, 25835966, 25844480, 20939137, and more.
  • ✔ Warranty Protection: This unit is backed by our one-year replacement warranty.

Expert Insight: The Importance of VIN Programming

Why is VIN programming so critical? The BCM communicates with nearly every other module in your Sierra—from the engine computer to the airbag system. Without the correct programming matched to your VIN, these systems can’t talk to each other correctly, leading to persistent errors or even a no-start condition. We use the latest GM software to ensure this module has the correct configuration for your truck’s specific options, saving you the time, cost, and headache of post-installation dealership visits.

Frequently Asked Questions

Do I need to have the dealership program this BCM?

No. This is the key benefit of our service. We pre-program the module to your vehicle’s VIN before shipping it. This makes the installation a simple plug-and-play process, with no additional programming required.

Where is the BCM located on my 2008 GMC Sierra?

On the 2007-2011 GMC Sierra 1500 and related GM trucks/SUVs, the Body Control Module is typically located under the driver’s side of the dashboard, near the steering column. It is usually accessible after removing the lower dash panel.

My airbag light is on. Will this fix it?

This BCM will fix airbag light issues caused by an internal BCM failure (like DTC B1001). However, after installation, some vehicles may require a ‘Setup SDM Primary Key’ procedure using a professional scan tool to sync the new BCM with the airbag system and turn off the light.

Is this a difficult part to install myself?

For most DIYers, the installation is straightforward and can take as little as 5-10 minutes. It involves disconnecting the battery, removing a lower dash panel, and swapping the electrical connectors from the old module to the new one. No special tools are typically needed for the replacement itself.

Will this programmed BCM for 2007-2011 GMC Sierra 1500 work for other models?

Yes, this BCM is compatible with a wide range of 2007-2013 GM trucks and SUVs, including the Silverado, Tahoe, Suburban, Yukon, and Escalade. It directly replaces numerous part numbers, ensuring broad application. Please verify the part number for your specific vehicle to ensure a perfect match.

Genuine OEM

Yes

Year
Condition

Refurbished

Model

Sierra 1500

Make

Year

2007 – 2011

Brand

CHEVROLET TRUCK

Warranty

1 Year

Interchange part number

MPN

25823558

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , ,

Scroll to Top