Is Your Saturn Vue’s Transmission Giving You Headaches?
If you’re driving a 2007-2010 Saturn Vue, you know it’s a reliable crossover. But when the transmission starts acting upโslamming into gear, refusing to shift, or putting the car into a frustrating “limp mode”โit can ruin your driving experience and leave you worried about a massive repair bill. In my 20+ years as a technician, I’ve seen this countless times. The culprit is often not the transmission itself, but its electronic brain: the Transmission Control Module (TCM).
Expert Pro Tip: Before you condemn your TCM, take a moment to inspect the main wiring harness connector that plugs into the module. On the Vue, it’s located in the LH (driver’s side) front of the engine compartment. Over time, moisture and road grime can cause corrosion on the pins, leading to poor communication that perfectly mimics the symptoms of a failed module. A simple cleaning with an electronics-safe contact cleaner can sometimes save you from a replacement. If the pins are clean and the problem persists, the module is the next logical step.
The Direct-Fit Solution: A VIN-Programmed 2007-2010 Vue Transmission Module
Forget about expensive diagnostic fees and programming charges at the dealership. This T42 TCM, part number 24235340, is the definitive solution for your vehicle’s shifting woes. We take the guesswork and hassle out of the repair by pre-programming the module to your vehicle’s specific VIN. This ensures it arrives at your door ready for a true plug-and-play installation, loaded with the latest GM software updates for optimal shift strategy and performance.
Is Your Vue Showing These Telltale Signs of TCM Failure?
- โ Harsh, erratic, or delayed gear shifts that make driving uncomfortable.
- โ The vehicle is stuck in one gear (often 2nd or 3rd) and won’t shift up or down.
- โ Check Engine Light or Transmission Warning Light is illuminated on your dash.
- โ Your scan tool shows diagnostic trouble codes (DTCs) like P0700, P0750, or other solenoid-related faults.
- โ A noticeable drop in fuel economy or a transmission that seems to be overheating.
- โ Complete loss of communication with the transmission module.
Plug-and-Play Installation: Get Back on the Road in Under 30 Minutes
Replacing the TCM on your Saturn Vue is a straightforward job you can do at home with basic tools. Our VIN programming makes it a simple swap.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electronic repair.
- Locate the Module: On the 2007-2010 Vue, the TCM is typically found in the LH (driver’s side) front engine compartment.
- Disconnect and Remove: Carefully unplug the electrical connectors. Be gentle with the locking tabs. Then, unbolt the old module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed TCM in place of the old one and securely reconnect the wiring harnesses.
- Final Steps: Reconnect the battery terminal. While the module is plug-and-play, it’s always best practice to use a scan tool to clear any stored DTCs from the vehicle’s memory.
Guaranteed Compatibility and Interchange
This module is a direct replacement for a wide range of GM vehicles and is interchangeable with numerous part numbers, ensuring a perfect fit for your repair. Compatible service numbers include: 24252114, 24234503, 24230461, 24234274, 24235340, 24235754, 24238856, 24239224, 24256960, and more. Restore the smooth, reliable operation of your vehicle’s automatic transmission with a quality-tested part you can trust.