2007-2010, Sebring, Engine Control Module, 68046281AA, Programmed To Your VIN,

Restore Your Sebring’s Performance Instantly!

Get your 2007-2010 Chrysler Sebring, Dodge Avenger, or Journey running smoothly again. This engine computer arrives fully programmed to your VIN for a simple, plug-and-play installation. No dealer visit required! Order today to solve stalling, no-start, and check engine light issues.

$234.99

+11.99 USPS Priority Shipping

Out of stock

Guaranteed Safe Checkout

Is Your Chrysler Sebring, Dodge Avenger, or Journey Running Rough?

If you’re dealing with frustrating issues like intermittent stalling, a persistent check engine light that won’t go away, rough idling, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the brain of your vehicle’s engine, managing everything from fuel injection and ignition timing to emissions controls and transmission shifting. When it starts to fail, it can cause a cascade of problems that are often difficult to diagnose. Don’t let a faulty computer keep your car off the road. This direct-fit replacement engine computer, part number 68046281AA, is the definitive solution to restore your vehicle’s performance and reliability.

From the Diagnostic Bay

We had a 2009 Dodge Avenger come into the shop with a classic complaint: it would run fine for about 15 minutes, then suddenly stall and refuse to restart for at least half an hour. The owner had already replaced the crank and cam sensors, but the problem persisted. We scanned it and got a slew of communication error codes. Instead of chasing electrical gremlins for hours, we went straight to the ECM. After connecting a scope, we saw the 5-volt reference signal dropping out as the module heated up. We installed one of our pre-programmed units, and the car ran perfectly. The thermal stress on these older circuit boards is a common failure point, and a simple swap saved the customer hundreds in diagnostic fees.

Common Symptoms of a Failing ECM

  • ✔ Check Engine Light is on with various, often unrelated, trouble codes.
  • ✔ Engine stalls unexpectedly or for no apparent reason.
  • ✔ Vehicle cranks but refuses to start.
  • ✔ Noticeable decrease in fuel economy.
  • ✔ Rough or erratic engine idling.
  • ✔ Poor acceleration and overall engine performance.
  • ✔ Automatic transmission shifting issues.
  • ✔ Communication errors with diagnostic scan tools.

The Plug-and-Play Solution: Your 2007-2010 Sebring Engine Computer

The biggest hurdle when replacing an engine computer is the programming. A module from a dealership or a salvage yard requires expensive, specialized tools to flash it to your vehicle’s specific Vehicle Identification Number (VIN) and security information. This unit eliminates that entire process. We handle all the programming for you before it ships. Simply provide us with your VIN and current mileage during checkout, and we will flash the module with your vehicle’s exact software. When it arrives at your door, it is 100% plug-and-play. Just disconnect the battery, swap the old module with the new one, reconnect the battery, and start your car. No dealer visits, no towing fees, and no extra programming costs.

This module is a reliable, direct-fit replacement for a wide range of original part numbers, ensuring broad compatibility across the Chrysler Sebring, Dodge Avenger, and Dodge Journey platforms equipped with the 2.4L engine. Please verify your original part number against our extensive cross-reference list to guarantee a perfect match for your vehicle.

Frequently Asked Questions

Do I need to have this computer programmed by a dealer?

No. This engine computer comes fully programmed to your vehicle’s specific VIN. It is a true plug-and-play solution, ready for installation right out of the box with no additional programming required.

What information do you need from me?

To ensure proper programming, we require your vehicle’s 17-digit VIN at the time of purchase. You can typically find this on your driver’s side dashboard (visible through the windshield) or on your vehicle’s registration or insurance card.

Is this compatible with my 2.4L Dodge Avenger?

Yes, this ECM is compatible with the 2008-2010 Dodge Avenger and 2009-2010 Dodge Journey models equipped with the 2.4L engine, in addition to the 2007-2010 Chrysler Sebring. Please check the detailed fitment list and cross-reference part numbers to confirm for your specific vehicle.

Will this fix my specific problem?

While this part resolves the vast majority of issues related to a faulty ECM, it’s crucial to ensure your vehicle has been properly diagnosed. This module will fix problems originating from the computer itself, but it will not fix issues caused by faulty sensors, wiring, or other mechanical components.

What is your warranty policy?

This part comes with a comprehensive warranty that covers any defects in the module. Please refer to our website’s warranty page for specific terms and conditions to ensure your peace of mind.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

68046281AA

Interchange part number

PartNumber

590

Model

SEBRING

Year

2008

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

superseded part number

05150472AA 05150518AA 68046281AA 68046281AB 68046281AC 68046281AD, 68046282AA 68046282AB 05187273AD 68046282AC 68046282AD 05187273AA, 05187273AB 05187273AC 05150518AA 05187274AA 05187274AD 05150472AA, 05150518AA 05187271AA 05150472AA 05150518AA 05187272 05187265, 05187266 05187263 05187267 05187269 05187270 05187254, 05187255 05187861 05187251 05187991 05187252 05187992, 05187250 05187990 05187237 05187243 05187236 05187862, 05187239 05187233 05187240 05187232 05187238 05187249

Scroll to Top