Is Your Chrysler Sebring, Dodge Avenger, or Journey Running Rough?
Are you experiencing frustrating issues like a persistent check engine light, sudden stalling, poor fuel economy, or a complete no-start condition? These are classic signs that the brain of your vehicle’s engine, the Engine Control Module (ECM), may be failing. For owners of 2007-2010 Chrysler Sebring, Dodge Avenger, and Dodge Journey models with the 2.4L engine, a faulty ECM can turn a reliable daily driver into a source of constant stress. Don’t let a malfunctioning computer keep you off the road. This direct-fit, pre-programmed engine computer is the straightforward, reliable solution you need to restore your vehicle’s performance and peace of mind.
From the Diagnostic Bay
We had a 2009 Dodge Journey come into the shop with a complaint that was driving the owner crazy. The vehicle would run perfectly for days, then suddenly stall at a stoplight and refuse to restart for 15-20 minutes. There were no consistent trouble codes, just a generic U-code for lost communication every so often. We checked the fuel pump, ignition system, and wiring harnesses, but everything tested fine. On a hunch, we put a scope on the ECM’s power and ground circuits and waited. After letting it idle for nearly an hour, we saw the 5-volt reference signal suddenly drop out just before it stalled. The ECM was failing internally due to heat soak. Replacing it with a properly programmed unit like this one solved the problem instantly. The customer was thrilled to have their reliable family vehicle back without the random, unpredictable stalling.
Symptoms of a Failing 2.4L Engine Computer
A failing ECM can manifest in numerous ways. If you’re noticing any of the following problems, it’s highly likely that your engine computer is the culprit. This 2007-2010 Sebring Engine Computer is designed to correct these exact issues.
- ā Check Engine Light: The check engine light is illuminated, and you may have diagnostic trouble codes (DTCs) related to sensors, actuators, or module communication.
- ā Engine Stalling or Misfiring: The engine may stall unexpectedly while driving or at idle. You might also experience rough idling, hesitation, or misfires.
- ā No-Start Condition: The engine cranks but refuses to start. This can be caused by the ECM failing to control the fuel injectors or ignition coils.
- ā Poor Performance and Fuel Economy: A noticeable decrease in acceleration, power, and a significant drop in your miles per gallon (MPG) can point to an inefficient ECM.
- ā Erratic Automatic Transmission Behavior: In many vehicles, the ECM (often called a PCM in this case) also controls transmission shifting. You might experience harsh shifts, delayed engagement, or getting stuck in a single gear.
- ā Failure to Communicate: Your mechanic’s diagnostic scan tool may be unable to establish a connection with the ECM, making diagnosis impossible.
The Plug-and-Play Advantage: No Dealer Visit Required
One of the biggest hurdles in replacing an engine computer is the need for expensive and time-consuming programming at a dealership. This module eliminates that step entirely. We handle the programming for you before it even ships. Simply provide us with your vehicle’s 17-digit Vehicle Identification Number (VIN) and current mileage during checkout, and we will flash the unit with your vehicle’s exact software and security information. When it arrives at your door, it’s ready for a true plug-and-play installation.
Why Choose Our Pre-Programmed 2007-2010 Sebring Engine Computer?
This isn’t just a replacement part; it’s a complete solution. We ensure that the module you receive is fully prepared for your specific vehicle. By matching the software to your VIN, we guarantee seamless communication with all other modules in your car, from the instrument cluster to the anti-lock brake system. This meticulous process ensures that all functions operate exactly as they did from the factory. This unit is a direct replacement for a wide range of original part numbers, ensuring broad compatibility. Please verify your original part number against the list below.
Compatible Part Numbers: 05150472AA, 05150518AA, 68046281AA, 68046281AB, 68046281AC, 68046281AD, 68046282AA, 68046282AB, 05187273AD, 68046282AC, 68046282AD, 05187273AA, 05187273AB, 05187273AC, 05187274AA, 05187274AD, 05187271AA, 05187272, 05187265, 05187266, 05187263, 05187267, 05187269, 05187270, 05187254, 05187255, 05187861, 05187251, 05187991, 05187252, 05187992, 05187250, 05187990, 05187237, 05187243, 05187236, 05187862, 05187239, 05187233, 05187240, 05187232, 05187238, 05187249
Frequently Asked Questions
Do I need to do any programming after I install this ECM?
No. This engine computer is a complete plug-and-play solution. We program it to your vehicle’s specific VIN before shipping. All you need to do is install it, and you’re ready to go. No dealer visits are necessary.
Where do I provide my VIN and mileage?
You will be prompted to enter your 17-digit VIN and current mileage during the checkout process. Please double-check this information for accuracy, as it is critical for correct programming.
Is this a difficult part to install myself?
For someone with basic mechanical skills, the installation is straightforward. It typically involves disconnecting the battery, unplugging the electrical connectors from the old ECM, removing a few mounting bolts, and then installing the new unit in reverse order. However, if you are not comfortable working on your vehicle, we always recommend professional installation.
Will this fix my specific problem?
This ECM is designed to correct the common failure symptoms listed above. While a faulty ECM is a very common cause of these issues, we always recommend a proper diagnosis by a qualified mechanic to confirm that the ECM is the root cause of your problem before ordering.
What if my original part number isn’t on the list but my vehicle is?
The part numbers listed represent the most common original equipment modules this unit replaces. If your vehicle is a 2007-2010 Sebring, Avenger, or Journey with a 2.4L engine but your part number is different, please contact us with your VIN and original part number. We can verify compatibility for you.