End Your Saturn Vue’s Shifting Problems for Good
If you’re dealing with a 2007-2010 Saturn Vue that’s shifting harshly, getting stuck in gear, or throwing transmission codes, you know how frustrating it can be. As a technician with over two decades of experience, I’ve seen countless drivers worry they need a new transmission when the real culprit is a faulty Transmission Control Module (TCM). This VIN-programmed T42 TCM, part number 24239224, is the direct-fit, reliable solution that gets your vehicle back to driving smoothly without a costly trip to the dealership.
The TCM is the brain of your automatic transmission, controlling everything from shift points to torque converter lockup. When it fails, communication breaks down, leading to the drivability issues you’re experiencing. Our module arrives pre-programmed to your vehicle’s specific VIN, ensuring it works perfectly right out of the box. This isn’t just a replacement part; it’s a permanent fix for the underlying electronic issue causing your headaches.
A Technician’s Notebook
I remember a 2008 Saturn Vue that came into my shop. The owner was told by another garage that he needed a complete transmission rebuild, a quote that ran over $3,500. His symptoms were classic TCM failure: intermittent ‘limp mode’ where the car wouldn’t shift past 2nd gear, a check engine light with a P0700 code, and occasionally harsh downshifts. I hooked up my professional scan tool and saw erratic data from the transmission sensors. Instead of tearing down the transmission, I recommended starting with the TCM. We installed one of these pre-programmed modules, and in under 30 minutes, the Vue was shifting like new. The customer saved thousands and drove away with a reliable vehicle. This is why you always diagnose the electronics first.
Is Your Saturn Vue Showing These Telltale Signs?
A failing TCM often mimics more severe mechanical problems. Before you assume the worst, check if your vehicle is exhibiting these common symptoms. This 2007-2010 Vue Transmission Module is designed to resolve them.
- âś” Unpredictable, harsh, or delayed gear shifts.
- âś” Vehicle is stuck in a single gear (often called “limp mode”).
- âś” Check Engine Light or Transmission Warning Light is illuminated.
- âś” Diagnostic Trouble Codes (DTCs) are present, such as P0700, P0750, or other solenoid-related faults.
- âś” A noticeable drop in fuel economy due to inefficient shifting.
- âś” Complete loss of communication with the transmission.
A Straightforward Guide to Installation
One of the best features of this module is its simple, DIY-friendly installation. You don’t need a lift or specialized transmission tools. For most Saturn Vue models, the process takes less than half an hour.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts and to help reset the system.
- Locate the Module: On the Saturn Vue, the TCM is typically found in the front of the engine compartment on the driver’s side (LH side). It’s often near the strut tower or under the air cleaner box.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old module. Then, unbolt the module from its mounting bracket.
- Install the New Module: Bolt the new, pre-programmed TCM into place. Securely reconnect the electrical harnesses, ensuring they click into place.
- Final Steps: Reconnect the battery terminal. While the module is plug-and-play, it’s good practice to use a basic scan tool to clear any stored fault codes from the vehicle’s memory.
Verified Fitment For These GM Vehicles
While this is a perfect solution for the 2007-2010 Vue Transmission Module, this T42 unit is compatible with a wide range of General Motors vehicles. Please verify your specific model and part number for a guaranteed match. This part is interchangeable with service numbers 24252114, 24234503, 24239224, and more.
Partial Fitment List:
- Saturn Vue: 2007-2010 (2.4L, Hybrid and non-Hybrid models)
- Chevrolet Cobalt: 2006-2010
- Chevrolet HHR: 2006-2011
- Chevrolet Impala: 2006-2011
- Chevrolet Silverado 1500: 2007-2013
- GMC Sierra 1500: 2007-2013
- Pontiac G6: 2006-2010
- …and many more GM cars, trucks, and SUVs from 2006-2014.
Frequently Asked Questions
Do I need to take my car to a dealer for programming after installation?
No. This transmission control module comes fully pre-programmed to your vehicle’s VIN. It is a true plug-and-play solution, saving you time and money.
Is there a core charge for my old part?
No, there is absolutely no core charge. You can keep your old part or dispose of it without the hassle of returning it.
Will this fix a P0700 trouble code?
A P0700 code is a general transmission fault request. In many cases where the TCM is the root cause of the fault, replacing it with this module will resolve the code and the underlying issue.
Where do I provide my VIN for programming?
You will be prompted to enter your vehicle’s 17-digit VIN during the checkout process to ensure we program the module correctly for your specific vehicle.
What kind of warranty is included?
This module is backed by our comprehensive one-year warranty, giving you peace of mind with your purchase.