Restore Flawless Shifting to Your Saturn Vue
If you’re dealing with the frustration of a transmission that won’t shift correctly, gets stuck in gear, or throws warning lights on your dash, you’ve come to the right place. As a technician with over two decades of experience under the hood, I’ve seen countless drivers struggle with these exact symptoms. Often, the culprit isn’t a catastrophic transmission failure, but a faulty Transmission Control Module (TCM). This VIN-programmed T42 TCM, part number 24241806, is the definitive solution for your 2007-2010 Saturn Vue, designed to restore the crisp, reliable performance you expect from your vehicle.
The TCM is the electronic brain of your automatic transmission. It processes data from various sensors to control shift points, torque converter lockup, and line pressure. When it fails, communication breaks down, leading to the erratic behavior that can make driving a nightmare. This module is a direct-fit, OEM-quality replacement that comes pre-programmed to your vehicle’s specific VIN. This means no expensive trips to the dealership for programming—it’s a true plug-and-play fix that you can perform right in your own driveway.
A Technician’s Notebook
I remember a 2008 Saturn Vue that came into the shop stuck in ‘limp mode’—it wouldn’t shift out of 3rd gear. The owner was worried about a full transmission rebuild, which would have cost thousands. After a quick scan, I saw a classic P0700 (Transmission Control System Malfunction) and a few solenoid circuit codes. Instead of tearing into the transmission, I checked the TCM. Sure enough, it was failing. We replaced it with a VIN-programmed unit just like this one. In less than an hour, the codes were cleared, the vehicle was shifting perfectly, and the customer drove away, having saved a fortune. This is the most common scenario I see for these issues.
Is Your Saturn Vue Showing These Telltale Signs?
A failing TCM can manifest in several ways. If you’re experiencing any of the following, this module is likely the solution you need. Don’t let a small electronic part lead to major mechanical stress on your transmission.
- ✔ Harsh, delayed, or erratic gear shifts.
- ✔ Vehicle is stuck in one gear (limp mode).
- ✔ Check Engine Light or Transmission Warning Light is illuminated.
- ✔ Diagnostic Trouble Codes (DTCs) are present, such as P0700, P0750, or other solenoid-related faults.
- ✔ Failure to upshift or downshift properly.
- ✔ A sudden drop in fuel economy.
- ✔ Intermittent loss of communication with the module.
Your 30-Minute Path to Smoother Shifting
Installing your new 2007-2010 Saturn Vue TCM is a straightforward job that most DIYers can handle with basic tools. The module is conveniently located in the engine bay, making it easily accessible.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the Module: On the Saturn Vue, the TCM is typically found in the LH front of the engine compartment. Check near the strut tower or under the air cleaner box.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old TCM. Then, unbolt the module from its mounting bracket.
- Install the New Module: Bolt the new, pre-programmed TCM into place and securely reconnect the electrical connectors.
- Final Steps: Reconnect the battery terminal. While the module is plug-and-play, it’s best practice to use a basic OBD2 scan tool to clear any stored fault codes from the vehicle’s memory.
Verified Fitment for Your Vehicle
This module is a guaranteed fit for the specified Saturn Vue models and is also interchangeable with a wide range of other GM vehicles. It replaces part numbers including 24242391, 24234503, 24252114, 24241806, and more, ensuring broad compatibility. Please verify your vehicle in the list below.
This part fits the following vehicles:
- SATURN VUE: 2007-2008 (2.4L), 2009 (2.4L, with or without hybrid), 2010
- CHEVROLET: Cobalt, HHR, Impala, Malibu, Monte Carlo, Tahoe, Silverado, Express, Colorado, Avalanche
- GMC: Yukon, Sierra, Savana, Canyon, Envoy
- BUICK: LaCrosse, Lucerne, Allure, Rainier, Rendezvous
- PONTIAC: G5, G6, Grand Prix, Pursuit, Montana
- CADILLAC: DTS
- SATURN: Aura, Ion
- HUMMER: H3
- SAAB: 9-7X
Note: Location varies by model (e.g., next to battery, under air cleaner, on frame rail).
Frequently Asked Questions about the 2007-2010 Saturn Vue TCM
Do I need to take my car to the dealer for programming?
No. This Transmission Control Module comes fully pre-programmed to your vehicle’s VIN. It is ready for installation right out of the box, saving you time and money.
What tools are required for installation?
You’ll only need basic hand tools, such as a socket set or wrench to disconnect the battery and unbolt the module. The entire process typically takes less than 30 minutes.
Will this fix a P0700 trouble code?
Yes. A P0700 code indicates a general fault in the transmission control system. A failing TCM is one of the most common causes. Replacing it with this module will resolve the underlying issue causing the code.
Is there a core charge for my old part?
No, there is absolutely no core charge. You can keep your old part or dispose of it without the hassle of returning it.
What if this doesn’t solve my problem?
This module is backed by our one-year warranty. While it is the solution for the vast majority of electronic transmission issues, if you continue to have problems, our expert support team is here to help you with further diagnostics.